Reply to thread

Message: <blockquote data-quote="mbed" data-source="post: 23871421" data-attributes="member: 565390">int delayValue = 500;     //500 ms delay (Change as you need)int LED1 = 1;         //Put the pin numbers you need (Pin 1 to Pin 5 in this case)int LED2 = 2;int LED3 = 3;int LED4 = 4;int LED5 = 5;void setup() {  // initialize digital pins as outputs.  pinMode(LED1, OUTPUT);  pinMode(LED2, OUTPUT);  pinMode(LED3, OUTPUT);  pinMode(LED4, OUTPUT);  }// the loop function runs over and over again forevervoid loop() {  for(int i = 0; i < 10; i ++)          //Runs the loop 10 times  {    digitalWrite(LED1, HIGH);       digitalWrite(LED2, HIGH);       digitalWrite(LED3, HIGH);        digitalWrite(LED4, HIGH);       digitalWrite(LED5, HIGH);      delay(delayValue);    digitalWrite(LED1, LOW);       digitalWrite(LED2, LOW);       digitalWrite(LED3, LOW);        digitalWrite(LED4, LOW);       digitalWrite(LED5, LOW);      delay(delayValue);  }  for(int i = 0; i < 10; i ++)          //Runs the loop 10 times  {    digitalWrite(LED1, HIGH);       digitalWrite(LED2, LOW);       digitalWrite(LED3, HIGH);        digitalWrite(LED4, LOW);       digitalWrite(LED5, HIGH);      delay(delayValue);    digitalWrite(LED1, LOW);       digitalWrite(LED2, HIGH);       digitalWrite(LED3, LOW);        digitalWrite(LED4, HIGH);       digitalWrite(LED5, LOW);      delay(delayValue);  }  int brightness = 255;  //PWM value for Fading  for(int i = 0; i < 10; i ++)   //run 10 times  {  for(int a = 0; a < 10; a ++)          //with Fade  {    analogWrite(LED1, brightness);     analogWrite(LED2, brightness);     analogWrite(LED3, brightness);     analogWrite(LED4, brightness);     analogWrite(LED5, brightness);       brightness = brightness - 25;    delay(150);  }  }}</blockquote>

Verification: Payakata winadi keeyak tibeda?

Top Bottom