Reply to thread

Message: <blockquote data-quote="navinnuwan" data-source="post: 22953308" data-attributes="member: 4611">Code Retrieval and Entry1Turn the ignition switch to the "On" position. Turn on the radio and verify that the display reads "Enter PIN Code." Turn the radio off, but leave the ignition switch in the "On" position.2Press and hold the No. 1 and No. 6 radio preset buttons, then turn on the radio. The display will flash two different codes - these are the first and second halves of the radio's serial number. Ignore the letter before each number and combine the two numbers to create an eight-digit serial number. Turn off the ignition.3Go to <a href="https://radio-navicode.honda.com/" target="_blank">https://radio-navicode.honda.com/</a> and click on the tab labeled "Get codes." Input your radio's serial number, vehicle's VIN and your personal information, then click "Submit." Write down the security code.4Turn the ignition switch to the "On" position and turn on the radio. Enter the security code using the soft buttons on the touch screen display. Turn off the ignition when the radio resumes normal operation.Tip    check    If you input the code incorrectly 10 times, you must wait one hour before attempting to enter the code again.(from the internet)</blockquote>

Top Bottom