Reply to thread

Message: <blockquote data-quote="Anusha" data-source="post: 2324828" data-attributes="member: 828">If you have not overclocked, 1.35V is WAY TOO MUCH FOR YOU CPU! I think even 1.2V is too much, but not sure about it. You have test it. I suggest you manually set the Vcore in BIOS to about 1.25V at first and run Multithreaded Prime95's small fft test (1st test) for couple of hours. If it doesn't fail, reduce the Vcore a little bit more....I am running my age old E6300 at 1.16V and 2.8GHz and I don't see why yours can't. Voltage has an exponential relationship with power consumption (hence power dissipation) and 1.2V will lower power consumtion by ~20%. But you need to test it!Note: When you set Vcore at AUTO and if you are running the CPU at stock speeds, BIOS will always set the Vcore to VID value. Yours it is 1.35V.</blockquote>

Top Bottom