Reply to thread

Message: <blockquote data-quote="kkr" data-source="post: 2698311" data-attributes="member: 103896">1Quick Installation GuideZTE ZXDSL 831C IIADSL / ADSL2+ 4Port Ethernet Modem RouterWiring DiagramZTE ZXDSL 831 C II ADSL router comes preconfigured for SLTBroadband.To connect to the internet follow the steps below.· Open a web browser.· Type <a href="http://192.168.1.1" target="_blank">http://192.168.1.1</a> (Default IP address of ADSL router)on the address space.· If the router and computer are in the same network, a Pop upwindow will appear to enter the username and password to(1) Computer(2) Phone(3) RJ 45 Cable(4) RJ-11 Tel Cable(5) Splitter(6) RJ-11 Tel Cable(7) RJ-11 Tel Cable(8) Phone Jack(9) ZXDSL 831 C IIDocuments PDFCompleteClick Here & UpgradeExpanded FeaturesUnlimited Pagesopen the Graphical User Interface (GUI) of the ADSL router.Enter Username – admin and password 􀂱 admin. Afterentering username and password, Web page will be loaded.· Enter the username & password provided by SLT and click onConnect.Note: To save the username and password you should save theconfiguration parameters and reboot the router which is underManagement option.However, if you encounter any problem please follow the stepsbelow to configure the router manually.Documents PDFCompleteClick Here & UpgradeExpanded FeaturesUnlimited PagesConfiguration of Computer / NotebookChange the IP address of the computer to be in the same networkas the ADSL router. (Default IP address of the ADSL router is192.168.1.1)To do this in windows XP operating system,· Right click on My Network Places and select Properties.· Right click on Local Area Connection and select Properties· Select Internet Protocol (TCP/IP) under General tab andclick on Properties.· Internet Protocol (TCP/IP) Properties Window will appearand select General tab.· Select Use the following IP address option and type therelevant IP address in the range 192.168.1.2 ~ 192.168.1.254.· Give the relevant subnet mask (255.255.255.0).· Give IP address of ADSL router (192.168.1.1) as the DefaultGateway· Select Use following DNS Server addresses option and enterfollowing IP addresses as the DNS Server addresses.· Preferred DNS Server 203.115.0.46· Alternate DNS Server 203.115.0.47· Click on OK.· Click close on Internet Protocol (TCP/IP) Propertieswindow.Configuration of ZTE ZXDSL 831C II manually with a new PVC· Open a web browser.· Type <a href="http://192.168.1.1" target="_blank">http://192.168.1.1</a> (Default IP address of ADSL router)on the address space.· If the router and computer are in the same network, a Pop upwindow will appear to enter the username and password toopen the Graphical User Interface (GUI) of the ADSL router.Enter Username – admin and password 􀂱 admin.Documents PDFCompleteClick Here & UpgradeExpanded FeaturesUnlimited Pages· In the ZXDSL 831C II Home page select Advanced > WAN> Connections and click on Add button.· In ATM PVC configuration input VPI = 8 and VCI = 35.Click Next.Documents PDFCompleteClick Here & UpgradeExpanded FeaturesUnlimited Pages· Select Connection type as PPP over Ethernet (PPPoE) andEncapsulation Mode as LLC / SNAP. Click Next.· Select obtain an IP address automatically and Enable NATClick Next.Documents PDFCompleteClick Here & UpgradeExpanded FeaturesUnlimited Pages· Enter the username and password provided by SLT. ClickNext.· Check whether the entered parameters are in the WAN Setup– Summary. If yes click Apply.Documents PDFCompleteClick Here & UpgradeExpanded FeaturesUnlimited Pages· Click on Finish.· Wait until ZXDSL 831C II will rebootDocuments PDFCompleteClick Here & UpgradeExpanded FeaturesUnlimited Pages· Click on DNS option in Advanced and Enable AutomaticAssigned DNS. Then click Apply. Else enter the same DNSaddresses manually used in computer / notebookconfiguration.Documents PDFCompleteClick Here & UpgradeExpanded FeaturesUnlimited Pages· Other than the above procedure you can edit the existing PVCalso.Configuration of web Browser (Internet Explorer)· Tools > Internet Options, Internet Options window willappear.· Select Connections Tab· Click on LAN Settings· Tick on Automatically detect settings· Disable all the other options and click OK.v Now your ZXDSL 831 II router is ready for internet surfing.v If still you have any difficulty call 1243 and SLT ADSL helpdeskwill assist you to complete the installation process.v Visit SLTnet Broadband in <a href="http://www.sltnet.lk" target="_blank">www.sltnet.lk</a> for more information.Documents PDFCompleteClick Here & UpgradeExpanded FeaturesUnlimited Pages</blockquote>

Verification: Haya warak paha keeyada? (haya wadi kireema paha)

Top Bottom