Reply to thread

Message: <blockquote data-quote="uajanath" data-source="post: 14929206" data-attributes="member: 186512">SLT ADSL ZTE Router ConfigBy LuckThe Default IP address for the Router is 192.168.1.1Change the IP address of the computer to be in the same networkas the ADSL router.Relevant subnet mask :255.255.255.0Default Gateway :192.168.1.1Preferred DNS Server 203.115.0.46Alternate DNS Server 203.115.0.47Configuration of ZTE ZXDSL 831C II manually with a new PVC· Open a web browser.· Type <a href="http://192.168.1.1" target="_blank">http://192.168.1.1</a> (Default IP address of ADSL router) on the address space.· If the router and computer are in the same network, a Pop up window will appear to enter the username and password toopen the Graphical User Interface (GUI) of the ADSL router.Enter Username – admin and password admin.WAN  ConnectionsATM PVC configuration:  input VPI = 8 and VCI = 35Click Next.Connection type :  PPP over Ethernet (PPPoE) and Encapsulation Mode as LLC / SNAP. Click Next.Select obtain an IP address automatically and Enable NATClick Next.Enter the username and password provided by SLT.Click Next.Check whether the entered parameters are in the WAN Setup Summary.Click Apply.Click on Finish.Wait until ZXDSL 831C II will rebootOn the DNS option in Advanced and Enable AutomaticAssigned DNS.Then click Apply. Else enter the same DNS addresses manually used in computer / notebook</blockquote>

Top Bottom