Reply to thread

Message: <blockquote data-quote="Billl Gates" data-source="post: 4736048" data-attributes="member: 97732">CDMA*3001#12345#Dont mess with the settings though .. Btw .. you can change the Alpha Tag to your name here*#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on againQuote:Nokia code Code function*3370# This Nokia code activates Enhanced Full Rate Codec (EFR) - Your Nokia cell phone uses the best sound quality but talk time is reduced my approx. 5%#3370# Deactivate Enhanced Full Rate Codec (EFR)*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time*#4720# With this Nokia code you can deactivate the Half Rate Codec*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type*#9999# Phones software version if *#0000# does not work*#06# For checking the International Mobile Equipment Identity (IMEI Number)*#147# This lets you know who called you last (Only vodofone)*#1471# Last call (Only vodofone)*#21# This phone code allows you to check the number that "All Calls" are diverted to*#2640# Displays phone security code in use*#30# Lets you see the private number*#43# Allows you to check the "Call Waiting" status of your cell phone.*#61# Allows you to check the number that "On No Reply" calls are diverted to*#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to*#67# Allows you to check the number that "On Busy Calls" are diverted to*#67705646# Phone code that removes operator logo on 3310 & 3330*#73# Reset phone timers and game scores*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible*#7760# Manufactures code*#7780# Restore factory settings*#8110# Software version for the nokia 8110*#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again*#94870345123456789# Deactivate the PWM-Mem**21*number# Turn on "All Calls" diverting to the phone number entered**61*number# Turn on "No Reply" diverting to the phone number entered**67*number# Turn on "On Busy" diverting to the phone number entered12345 This is the default security code press and hold # Lets you switch between linesVeiw IMEI #(International Mobile Equipment Identity)*#06Half Rate CodecHalf Rate Codec will decrease sound quality but it gives you about 30% lower batteryconsumption. You may enable it by this code:* 4720 #or disable it:# 4720 #Enhanced Full Rate Codec (EFR)For activation enter *#3370#For deactivation enter *#3370**#0000# for checking the phones software (SW) - called firmware revision information.*#6110# Try this code if the above code doen't work.*#6190# Try this code if the above code doen't work.*#746025625# [*#sim0clock#] to check if the Sim-Clock can be Stopped(Sim-clock-stop is a kind of standby mode which will save battery time)code will let you send free sms but it only lasts for 3 minutes- NOT TESTED.*#92702689# [*#war0anty#] Warranty code.You don't need the warranty-codes any more - you canjust scroll through the information like in any other menu. It has the thesame data as 81xx and 31xx phones (with "Edit" button for purchase date, and "User data transfer").Menu: 1: Displays Serial Number. 2: Displays the Month and Year of Manufacture (0997)3: Displays (if there) the date where the phone was purchased (MMYY)you can here set the Purchasing Date (Warning: You can only do this once -so be careful what you write...)4: Displays the date of the last repairment - if found (0000)6: Transfers ALL phone numbers, pictures, sounds from one phone to another(eg. if broken) 6110 can also transfer all data via IRport (Confirm Transfer?)SP LOCKS.The Service provider (SP) lock is used to lock the cell phone to theSP's SIM card. Once the cell phone is locked to a specific operator, if oneinserts a SIM card from a different operator the phone will refuse to accept it!The cell phone will however accept another SIM card from the same operator.All Nokia phones (2110 and newer) have four different SIM locks which can be used to lock the phone for upto 4 different providers. But most phones with restriction only have one lock activated. ( lock 1)The main code used in Nokia phones is:#pw+(master code)+Y#This code is able to check, activate or remove Sim card restriction (SP-lock).Use the * key to get the p, + and w chars.'Y' has to be 1,2,3 or 4 - depending of what lock you what to deal with.#pw+1234567890+1# for Provider-Lock status (MCC+MNC)#pw+1234567890+2# for Network-Lock status (GID 1)#pw+1234567890+3# for Provider-Lock status (GID 2)#pw+1234567890+4# for SimCard-Lock status (MSIN)(master code is a 10 digit code, based on the phones IMEI number)Eg. To remove restriction on lock 1 type following code:#pw+(master code)+1#If you just want to check your phone use 10 random numbers Eg. 1234567890as the (master code)EXSAMPLE:To check if phone if restricted on lock 1 type the following code: #pw+1234567890+1#NOTE that this function must be used with care since it's only possible to type in 3different codes on each lock! if one types in more than 3 times then phone needs extra care.ADVANCED CODES!Bypass the SP lock (Nokia Models)With some versions of Nokia 16xx/21xx/31xx/51xx/81xx that are SIMlocked you can bypass theSP lock like this:1] Insert sim card of diferent provider.2] Turn on the phone and press the UP VOLUME key for 3 sec. then release it and the phonesays PIN CODE ?3] Press the "C" key.4] Then Press * and wait until it desapear and apear again, then press * one more time and04*PIN*PIN*PIN#The phone now says: PIN CODE CHANGED (or ACCEPTED)and the SIM card is accepted until you restart the phone again.NOTE: On vesion 5.04 (5110) Nokia has removed this option !Crazy 5110Send a SMS full of . (dots) the it'll go crazy when you scroll the received message in your 5110. It doesn't do any permanent damage...it only goes crazy if you scroll the SMS. I'm not sure if it works with all of the software version but it works with 4.59. Doesn't work on SW version 4.53 ..Your number in your display1. Goto menu 3-7 Call cost settings.2. Turn ON the Call costs' limit 3-7-1. PIN2 code Required.3. Put in the limit with the phone number. eg. if your phone # is 054 123456 Enter the limit as 1234564. Goto menu 3-7-2 Show costs in. PIN2 code Required.5. Select Currency.6. Enter Unit price : 17. Enter Currency name as 054 (per my phone # eg. above) Now the phone number 054 123456will remains on the 4th row of the display. Secondly, if you press the # key, it prompt which line to be used; Line 1 or 2.Larger Number Tip (works in 51xx series)If you hold the key # while you are in the names list, the telephone number can be viewed larger.Veiwing the speed dial place.Type 1#, 2#, 3#, 4#,... on the keypad (when you're not in the menu) to get the phone numberused for with this key when speed dialing.Numbers in SMSHold the # key press * three times, the abc or ABC on the upper left of the displayswitches to 123 and you can write numbers directly. To come back to abc repeat the procedure.Please note that if you do these next tricks, the new menus can't be erased withoutrestoring the factory default settingsTo activate the "Car" menu, you need to short-circuit pins "4" and "5". After a short time the word "Car" will be shown in the display. Menu 3-7 is now enabled.To activate the "Headset" menu, you need to short-circuit pins "3" and "4". After ashort time the word "Headset" will be shown in the display. Menu 3-6 is now enabled.Charge your phone forever.If your phone is off and you charge it, unplug the cord while pressing the power button to turn it on, and it'll keep charging for ever...NetMonitor informationGSM phones from Nokia have a special menu called Netmonitor (Operator Field Test Display) which gives access to more than 50 submenus (depending on model). Signalling displays,information on serving cell and neighbours, Network parameters, Ciphering, hopping, DTX status and IMSI, Lights status control and batt. temperatur is just some a the functions found here.There are three different modes:- display mode- execute mode- help mode</blockquote>

Verification: Hath warak paha keeyada? (hatha wadikireema paha)

Top Bottom

Search

Latest ads

Reply to thread