Reply to thread

Message: <blockquote data-quote="gazaly" data-source="post: 158207" data-attributes="member: 10197">NTOSKRNL Missing or CorruptIf you get an error that NTOSKRNL not found:Insert and boot from your W!ndow$ XP CD.At the first R=Repair option, press the R keyPress the number that corresponds to the correct location for the installation of Windows you want to repair.Typically this will be #1Change to the drive that has the CD ROM.CD i386expand ntkrnlmp.ex_ C:\Windows\System32\ntoskrnl.exeIf W!ndow$ XP is installed in a different location, just make the necessary change to C:\WindowsTake out the CD ROM and type exit--------------------------------------------------------------------------------HAL.DLL Missing or CorruptIf you get an error regarding a missing or corrupt hal.dll file, it might simply be the BOOT.INI file on the root of the C: drive that is misconfiguredInsert and boot from your WindowsXP CD.At the first R=Repair option, press the R keyPress the number that corresponds to the correct location for the installation of Windows you want to repair.Typically this will be #1Type bootcfg /list to show the current entries in the BOOT.INI fileType bootcfg /rebuild to repair itTake out the CD ROM and type exit--------------------------------------------------------------------------------Corrupted or Missing \WINDOWS\SYSTEM32\CONFIGIf you get the error:Windows could not start because the following files is missing or corrupt\WINDOWS\SYSTEM32\CONFIG\SYSTEM or \WINDOWS\SYSTEM32\CONFIG\SOFTWAREInsert and boot from your W!ndow$ XP CD.At the first R=Repair option, press the R keyPress the number that corresponds to the correct location for the installation of Windows you want to repair.Typically this will be #1Enter in the administrator password when requestedcd \windows\system32\configDepending on which section was corrupted:ren software software.bad or ren system system.badDepending on which section was corruptedcopy \windows\repair\systemcopy \windows\repair\softwareTake out the CD ROM and type exit--------------------------------------------------------------------------------NTLDR or NTDETECT.COM Not FoundIf you get an error that NTLDR is not found during bootup,If you have FAT32 partitions, it is much simpler than with NTFS.Just boot with a Win98 floppy and copy the NTLDR or NTDETECT.COM filesfrom the i386 directory to the root of the C:\ drive.For NTFS:Insert and boot from your W!ndow$ XP CD.At the first R=Repair option, press the R keyPress the number that corresponds to the correct location for the installation of Windows you want to repair.Typically this will be #1Enter in the administrator password when requestedEnter in the following commands (X: is replaced by the actual drive letter that is assigned to the CD ROM drive.COPY X:\i386\NTLDR C\:COPY X:\i386\NTDETECT.COM C:\Take out the CD ROM and type exit</blockquote>

Verification: Hathara warak wissa keeyada? (Hathara wadi karanna 20)

Top Bottom