Reply to thread

Message: <blockquote data-quote="KeBa" data-source="post: 6292345" data-attributes="member: 85781">Table of contentsi) Terms of agreementii) Downloadsiii) Changelog1) Converting to CID52 (if required)2) Backing up GDFS3) Flashing the firmware4) Customizing your phone5) Uploading files via FSX *optional**) Recovering from a bad flashi) Terms of agreementBy following this guide you recognize that SE-NSE or the XS++ Team take no responsibility for any damage caused to your handset while doing so, having said that, it is very unlikely that you will.If you do not agree to these terms leave this page now.ii) Downloads<a href="http://filebeam.com/429ce21a5d0c77c6ca89103c0a58d4e5" target="_blank">USB Flash Driver</a>XS++(uda eke thiyenawa)Sony Ericsson Update Service (SonyE PC suit)Please download all of these files before proceeding.iii) ChangelogV1.0 - October 1st 2007Initial releaseV1.1 - October 5th 2007Added links for CDA and language informationAdded Foreword and Changelog sectionsUpdated CID-change informationV1.2 - October 17th 2007Reorganized a little. GDFS restore is now clearly shown as an optional stepUnless your customizing with FSX, it is also an optional stepV1.3 - October 22nd 2007Added note about customization1) Converting to CID52 (if required)If XS++ detects a DB2020 CID49 or CID51 phone, it will automatically ask if the user wants to upgrade. I can not grab any screenshots of this as my phone is already CID52. (if someone would do that for me though it would be much appreciated1) Converting to CID52 (if required)If XS++ detects a DB2020 CID49 or CID51 phone, it will automatically ask if the user wants to upgrade. I can not grab any screenshots of this as my phone is already CID52. (if someone would do that for me though it would be much appreciated 2) Backing up GDFSBacking up the GDFS isn't something which necessarily has to be done when flashing firmware, but it is a very good way to ensure you don't damage your phone beyond repair.Step 1.Take battery out of phone and put back in (do not turn phone on). Open XS++ and click Connect. Hold down the "C" button on the phones keypad and connect the USB cable. If this is the first time you flash your phone you will need to install the Flash drivers I posted further up.Step 2. Click on the GDFS tab as shown in the picture.Step 3.Click "Backup GDFS" and wait (shouldn't take more than about half a minute).Step 4.Done<img src="/styles/default/xenforo/smilies/default/nerd.gif"  class="smilie" loading="lazy" alt=":nerd:" title="Nerd    :nerd:" data-shortname=":nerd:" />3) Flashing the firmware<img src="/styles/default/xenforo/smilies/default/nerd.gif"  class="smilie" loading="lazy" alt=":nerd:" title="Nerd    :nerd:" data-shortname=":nerd:" />Step 1.Take battery out of phone and put back in (do not turn phone on). Open XS++ and click Connect. Hold down the "C" button on the phones keypad and connect the USB cable.<img src="http://img135.imageshack.us/img135/1320/542033origzh0.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Step 2.Select the firmwares (make sure you extract them first) by clicking the "..." buttons or simply dragging the file from the explorer to the box (don't get mixed up with FS and MAIN).Click "Flash" and wait (this takes a while, 6-7 minutes is normal).<img src="http://img135.imageshack.us/img135/2141/526824origxk4.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Step 3.Flashing is done, you can breathe now<img src="http://img528.imageshack.us/img528/3236/513360origfz0.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></blockquote>

Verification: Hath warak paha keeyada? (hatha wadikireema paha)

Top Bottom