Reply to thread

Message: <blockquote data-quote="labu gediya" data-source="post: 14944950" data-attributes="member: 452091">All Chinadefault user code: 1122, 3344, 1234, 5678 *#66*# Set Factory Mode CONFIRMED*#8375# Show Software Version CONFIRMED*#1234# A2DP ACP Mode CONFIRMED*#1234# A2DP INT Mode CONFIRMED*#0000# + Send : Set Default Language CONFIRMED*#0007# + Send : Set Language to Russian CONFIRMED*#0033# + Send : Set Language to French CONFIRMED*#0034# + Send : Set Language to Spanish CONFIRMED*#0039# + Send : Set Language to Italian CONFIRMED*#0044# + Send : Set Language to English CONFIRMED*#0049# + Send : Set Language to German CONFIRMED*#0066# + Send : Set Language to Thai CONFIRMED*#0084# + Send : Set Language to Vietnamese CONFIRMED*#0966# + Send : Set Language to Arabic CONFIRMED*#800# make Etel E10 model displaying message BT power on. But on display it dont resemble the blutooth power on icon.(actually t makes BT stuck, but after restarting t becomes normal <tested by me>)More codes to reset chinese mobile phone*#77218114#*#881188#*#94267357#*#9426*357#*#19912006#*#118811#*#3646633#also found theseService codes Konka:C926 software version: *320# SendC926 set default language: *#0000# SendC926 set English language: *#0044# SendService codes GStar:GM208 (Chinese Nokea 6230+) engineering menu: *#66*#Set language to English: *#0044#Set language to Russian: *#0007#ZTE Mobile:>1- *938*737381#2- PHONE WILL DIPLAYED DONE3- POWER OFF YOUR PHONE AND POWER ON AGAINalcatel:>E205unlocking phone code,only press***847# without simcardE900 software version: *#5002*8376263#E900 full reset: *2767*3855#Service codes Spice:S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200S410 engineer mode: *#3646633#S900 software version: *#8375#S900 serial no: *#33778#Service codes Philips:S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200Service codes "Chinese" models:default user code: 1122, 3344, 1234, 5678Engineer mode: *#110*01#Factory mode: *#987#Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200Restore factory settings: *#987*99#LCD contrast: *#369#software version: *#800#software version: *#900#Service codes BenQ:software version: *#300#test mode: *#302*20040615#Service codes Pantech:software version: *01763*79837#service menu: *01763*476#reset defaults (phone/user code reset to default): *01763*737381#Service codes VK-Mobile **x, 5xx:software version: *#79#software version: *#837#service menu: *#85*364# (hold #)Service codes VK200, VK2000, VK2010, VK2020, VK4000:software version: *#79#service menu: *#9998*8336# (hold #)reset defaults (phone/user code reset to default): *#9998*7328# (hold #)Service codes LG:software version: 2945#*#KG300 NVRAM format: 2945#*# -> menu 15Service codes Sony-Ericsson:J100 software version: #82#Service codes Fly:M100 software version: ####0000#2040(i) reset defaults: *#987*99# SendMX200 reset defaults: *#987*99# SendMX200 software version: *#900# SendSL300m reset defaults: *#987*99# SendSL300m software version: *#900# SendSL500m reset defaults: *#987*99# SendSL500m software version: *#900# SendMP500 reset defaults: *#987*99# SendMP500 software version: *#900# SendSet language to English: *#0044#Set language to Russian: *#0007#Service codes Konka:C926 software version: *320# SendC926 set default language: *#0000# SendC926 set English language: *#0044# SendService codes GStar:GM208 (Chinese Nokea 6230+) engineering menu: *#66*#Set language to English: *#0044#Set language to Russian: *#0007#Service codes Motofone-F3:Motofone F3 software version: **9999* Send***300* Set SIM Pin***310* / ***311* SIM Pin ON | OFF***000* Reset Factory settings***644* Set Voicemail number***260* / ***261* Auto keypad lock ON | OFF***510* / ***511* Voice Prompts ON | OFF***160* / ***161* Restricted Calling (Phonebook only) ON | OFF***200608* Send: software version***200606* Send: software version***200806* Send: flex version***250* / ***251* Keypad tones ON | OFF***470* Select time format***500* /***501* Prepaid Balance Display ON | OFF***520* Change languageService codes Motorola:C113, C114, C115, C115i, C116, C117, C118 software version: #02#*C138, C139, C140 software version: #02#*C155, C156, C157 software version: #02#*C257, C261 software version: #02#*V171, V172, V173 software version: #02#*V175, V176, V176 software version: #02#*C168, W220 software version: *#**837#W208, W375 software version: #02#*and "yes"''I-mobile Inno30, 55, 89, 90, 99, 100, A10, A20, P10, Vk200- Set full factory *741*737381#- Set full factory *741*7373868#- Set full factory *741*2878#- Set Engineer Mode *888*888#- Check software version *888*837#I-mobile 100 ,200 , 313- Check software version #*888#I-mobile 309, 310- Check software version *0*4636#- Test Mode *0*6268#I-mobile 311- Check software version #*878#I-mobile 511- Check software version *1222*1#I-mobile 301, 302,308, 508, 601, 602, 603, 604, 606, 611, 901, 902- Check software version *#159#- Set Factory Mode *#32787#- Set Engineer Mode *#3646633#I-mobile 503, 506, 605, 600, 607, 608- Set Engineer Mode ***503#- Set Factory Mode ***504#- Set Auto Test ***505#I-mobile 509, 612- Set Factory Mode *#66*#I-mobile 504, 505, 803- Check software version *68*48#- Set full factory *789#- Test Mode *#789#I-mobile 305, 306, 315, 510, 609, 609i,516- Check software version *#8375#- Set Factory Mode 878I-mobile 610- Check software version *#22#I-mobile J101, J102- Test Mode *23638777*783781#I-mobile 502, 502i, 505, k9, 802- Check software version *201206*4636#SamsungSamsung Programmers code!(Secret code)  All Samsung Hard Reset Codes 1.)*2767*3855# 2.)*7465625*638*00000000*00000000#3.)#7465625*638*00000000#Following is the list of code for SIM issue:*7465625*746*code# Enables SIM lock#7465625*746*code# disables SIM lock*7465625*28746# Auto SIM lock On#7465625*28746# Auto SIM lock Off*#0778# Sim Serv, Table.*#0638# SIM Network ID.*#0746# SIM info.*#2576# SIM error.*#0778# To see what your SIM supports.*#0746# Your sim type.*#9998* NET# SIM NEtwork ID*#9998*778# SIM Serv. Table.*#9998*2576# Forces SIM Error.To remove sim locks:#0111*0000000# *2767*66335#*2767*3700#*2767*7100#*2767*8200#*2767*7300#*2767*2877368#*2767*33927#*2767*85927#*2767*48927#*2767*37927#*2767*28927#*2767*65927#*2767*29927#*2767*78927#*2767*79928#*2767*79928#*2767*82927#*2767*787927#*2767*73738927#*2767*33667#*2767*85667# PROGRAMMER CODES!*#06#=Displays IMEI NO.*#9999#=SW Version.*#8888#=HW Version.*#0842#=Vibrator.*#0289#=Buzzer.*#0228#=Battery Stat.*#0782#=RTC Display*#0523#= LCD Contrast.*#0377#=NVM error log*#5646#=GSM Logo Set.*#0076#=Production No.*#3323#=Forced Crash*#9324#=Netmon <> press the hungup key to exit.*#32439483 =Digital Audio Interferenceoff.*#32436837#=Digital Audio Interferenceon.*#9998*JAVA# =Edit GPRS/CSD settings*#9998*Help# =Screen / List of codes.*#9998*=RTC# =RTC Display.*#9998*bat#=Battery Status.*#9998*buz#=Turns Buzzer On.*#9998*vub# =Turns Vibator On.*#9998*LCD#=LCD Contrast.*#9998*9999#=Sotfware Version.*#9998*8888#=Hardware Version.*#9998*377#=Non Volatile Merory Error Log*#9998*968#=Remider Tune.*#9998*NVM#=Displays Non-VolitileMermory Status.*#9999*C#=Netmon.*#9998* DEAD# =Forces Phone Crash.*#9998*533# =(LED).*#999* =Show date and alarm clock.*#8999*638# =show network information.*#9998*5646# =change operator logoatstartup.*#9998*968# =View melody alarm.*2767*MEDIA# =Resets the media on phone*2767*FULL# =Resets the EEPRON**2767*CUST# =Resets the sustom EEPRON.*2767*JAVA#= Resets JAV downloads *2767*STACKREST# =RESETS STACK.*2767*225RESET# * =VERY Dangerous.*2767*688# = Unlocking code*#8999*8378# = All in one code*#4777*8665# = GPSR Tool*#8999*3825583# = External Display*#8999*377# = Errors*#2255# = call list#*5737425# = JAVA Something choose 2andit crashed.#*536961# = Java Status Code#*536962# = Java Status Code#*536963# = Java Status Code#*53696# = Java Status Code#*1200# = AFC DAC Val#*1300# =IMEI#*2562# = white for 15 sec than restarts.#*2565# =Check Blocking#*3353# =check code#*3837# = White for 15 secs than restarts.#*3849# = white for 15 secs than restarts.#*7222# = Operation Type #*7224# = I got ERROR !#*7252# = Operation Type #*7271# =Multi Slot #*7271# =Multi Slot #*7337# = EPROM Reset ( unlock and resets Wap settings)#*2787# =CRTP ON/OFF#*3737#= L1 Dbg Data#*5133# =L1 Dbg Data#*7288# =GPRS Attached#*7287# =GPRS Detached#*7666# =SrCell Data#*7693# =Sleep Act/Deact #*7284# =Class B/C #*2256# =Calibration Info#*2286# =Battery Data#*2679# =Copycat Feature #*3940# =External loop 9600 bps#*8462# =sleep time#*5176# =L1 Sleep#*5187#= L1C2G Trace #*3877#= Dump Of spy trace*#8999*8376263# =HW Ver SW Ver and build date*#746565# =Checks the locks*7465625*638*Code# =Enables Network lock#7465625*638*Code#= Disables Network lock#7465625*782*code# =Disables Subset lock*7465625*782*code# =Enables subset lock*Known Unlock CODES*S500/ P400/ E500/ E700/ X100/ X600/E100/Enter *2767*3855# with and accepted SIMcard If this codes fails,For accepted sim card insert below code:Enter *2767*688# or #*7337#A300/ A400 / A800*2767*637#S100 / S300 / V200 / V205 / E710 / E715/ D410 / X426/*2767*7822573738#Try this if above code fails:1.) Insert sim card2.) type #9998*3323# if it display wrong card3.)Press exit and select 7.4) Phone will reboot.5.) SIM should work.6.) Type *0141# and press call.7.) Power off the phone and insert another sim card 8.) If a code is requested,Enter 00000000.NOTE : PAKIDEA.COM ARE NOT RESPONSIBLE FOR ANY PROBLEM OCCURS WHILE USING THESE CODE. ITS ALL DOWN TO THE USER WHO IS USING THESE CODE. *#9998*289# : Change Alarm Buzzer Frequency*#9998*364# : Watchdog*#9998*523# : Change LCD contrast - Only with version G60RL01W*#9998*746# : SIM File Size*#9998*862# : Vocoder Reg - Normal, Earphone or carkit can be selected*#9998*786# : Run, Last UP, Last DOWNIf the up Codes doesn't work, you should change *#9998* to *#0. i.e. *#9998*523# change to*#0523#. An other thing that will help is to remove your SIM card. *0001*s*f*t# : Changes serialparameters (s=?, f=0,1, t=0,1) (incomplete)*0003*?# : unknown*0003*?# : unknown*#9998*377# : EEPROM Error Stack - Use side keys to select values. Cancel and ok*#9998*427# : Trace Watchdog*#9998*785# : RTK (Run Time Kernel) errors - if ok then phn is reset, info is put in memory error.*#9998*778# : SIM Service Table*#9998*947# : Reset On Fatal Error*#9998*872# : Diag*#9998*999# : Last/Chk*#9998*324# : Debug screens*#9998*636# : Memory status*#9998*544# : Jig detect*#9998*842# : Test Vibrator - Flash the screenligth during 10 seconds and vibration activated*#9998*837# : Software Version*#9998*228# : Battery status (capacity, voltage, temperature)*#9998*246# : Program status*#9998*9266# : Yann debug screen (=Debug Screens?) *#9998*9999# : Software versionSP-unlock SGH-600 (and also SGH-Sgh-600*2767*3855# : Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! )But also changes IMEI to 447967-89-400044-0. (Doing this is illegal)*2767*2878# : Custom EEEPROM Reset*These codes have been tested with version FLD_2C6 G60SB03X of Samsung SGH-600Samsung SGH-600 Unlock Codes*#9999# : Show Software Version*#9125# : Activates the smiley when charging.*#0001# : Show Serial Parameters*#0837# : Show Software Version (instructions)Sony ericson <**<                               Use to display the information about mobile network< 0 0 0 0 >                      Use to reset Sony Ericsson mobile default language>*<<*<*                          Use to display the mobile software version<0000>                           Use to reset Sony Ericsson mobile default theme#                                    To display the SIM Number of the mobile**04*0000*0000*0000#     You can access you mobile settings without SIM card*#0000#                          Use to reset Sony Ericsson mobile English menu904060 + >                     Use to reset mobile phone settings904093 + menu               Use to display the CDMA ModeOn/off button                   Press and release quickly on/off button to verify the battery                                    status. > * > (>);                        To display the text contained in the phoneNokiaCode Description*3370# Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound quality but talk time is reduced my approx. 5%#3370# Deactivate Enhanced Full Rate Codec (EFR)*4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.#4720# Deactivate Half Rate Codec.*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type.*#9999# Phones software version if *#0000# does not work.*#06# For checking the International Mobile Equipment Identity (IMEI Number).#pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).#pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).#pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).#pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).*#147# (vodafone) this lets you know who called you last.*#1471# Last call (Only vodofone).*#21# Allows you to check the number that "All Calls" are diverted to.*#2640# Displays security code in use.*#30# Lets you see the private number.*#43# Allows you to check the "Call Waiting" status of your phone.*#61# Allows you to check the number that "On No Reply" calls are diverted to.*#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to.*#67# Allows you to check the number that "On Busy Calls" are diverted to.*#67705646# Removes operator logo on 3310 & 3330.*#73# Reset phone timers and game scores.*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible.*#7760# Manufactures code.*#7780# Restore factory settings.*#8110# Software version for the nokia 8110.*#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again.*#94870345123456789# Deactivate the PWM-Mem.**21*number# Turn on "All Calls" diverting to the phone number entered.**61*number# Turn on "No Reply" diverting to the phone number entered.**67*number# Turn on "On Busy" diverting to the phone number entered.12345 This is the default security code.press and hold # Lets you switch between lines.Apple iPhone's 3001#12345# and tap Call. Enter field modeField mode reveals many of the inner settings of your iphonespecially up-to-date network and cell information*#06# Displays IMEI. No need to tap callIMEI is the unique identifier for your cell phone hardwaretogether with your SIM information it identifies you to theprovider network*777# and tap Call. Account balance for prepaid iPhone*225# and tap Call. Bill Balance. (Postpaid only)*646# and tap Call. Check minutes. (Postpaid only)These three are pretty self explanatory*#21# and tap call. Setting interrogation for call forwards.Discover the settings for your call forwarding. You'll see whetheryou have voice, data, fax, sms, sync, async, packet access, andpad access call forwarding enabled or disabled.*#30# and tap Call. Calling line presentation check.This displays whether you have enabled or disabled the presentationof the calling line, presumably the number of the party placing the call.*&76# and tap Call. Check whether the connected line presentation is enabled or not.State whether the connected line presentation is enabled or disabled. Presumably similiar to the calling line presentation.*#43# and tap Call. Determine if call waiting is enabledDisplays call waiting status for voice, data, fax, sms, sync data, async data,packet access and pad access. Each item is either enabled or disabled.*#61# and tap Call. Check the number for unanswered calls.Sho the number for voice call forwarding when a call is answered. Also showthe options for data, fax, sms, sync, async, packet access and pad access*#62# and tap Call. Check the number for call forwarding if no service is available.Just like the previous, except for no-service rather than no-answer situations.*#67# and tap Call. Check the number for call forwarding when the iPhone is busy.And again, but for when the iPhone is busy.*#33# and tap Call. Check for call control barsHere you will find all GSM-Codes/Secret-Code, for the iPhone are relevant.*#06# Displays your IMEI on your iPhone.*3001#12345#* To get your access to the field test mode of iPhone.*#30# Thus, you can check whether the caller identification (Clip-function) in the iPhone is active.*#43# Call Waiting Status*43# Activate a waiting#43# Deactivate waitingVisit this web to see more<a href="http://fmtmobile.blogspot.com/p/all-phone-reset-codes.html" target="_blank">http://fmtmobile.blogspot.com/p/all-phone-reset-codes.html</a></blockquote>

Verification: Winadiyakata thappara keeyak tibeda?

Top Bottom