Aprilia RSV4 R APRC Concep
Aprilia RSV4 R APRC Concep Specifications: Engine and Transmissions
Engine Type : Aprilia longitudinal 65° V-4 cylinder, 4-stroke, liquid cooling system, double overhead camshafts (DOHC), four valves per cylinder
Bore and stroke : 78 x 52.3 mm
Total engine capacity : 999.6 cc
Compression ratio : 13:1
Maximum power at crankshaft : 180 HP (132.4 kW) at 12,250 rpm
Maximum torque at crankshaft : 115 Nm at 10,000 rpm
Fuel system : Airbox with front dynamic air intakes. Variable length intake ducts controlled via ECU.
4 Weber-Marelli 48-mm throttle bodies with 8 injectors and latest generation Ride-by-Wire engine management.
Ignition : Magneti Marelli digital electronic ignition system integrated in engine control system, with one spark plug per cylinder and “stick-coil”-type coils
Starter : Electric
Exhaust system : 4 into 2 into 1 layout, single oxygen sensor, lateral single silencer with engine control unit-controlled butterfly valve and integrated trivalent catalytic converter (Euro 3)
Lubrication : Wet sump lubrication system with oil radiator and two oil pumps (lubrication and cooling)
Transmission : 6-speed cassette type gearbox
1st: 38/16 (2.375)
2nd: 35/18 (1.944)
3rd: 28/17 (1.647)
4th: 32/22 (1,455)
5th: 34/26 (1,308)
6th: 33/27 (1,222)
Clutch : Multiplate wet clutch with mechanical slipper system
Primary drive : Straight cut gears and integrated flexible coupling, drive ratio: 73/44 (1,659)
Secondary drive Chain : Drive ratio : 42/16 (2.625)
Chassis, Suspensions, Brakes, Tyres and Wheels
Chassis : Twin-spar aluminium frame, with castings and pressings.
Sachs steering damper
Front suspension : Showa upside-down fork, 43 mm stanchions. Aluminium radial caliper mountings. Completely adjustable spring preload, hydraulic compression and rebound damping. Wheel travel 120 mm
Rear suspension : Double braced aluminium swingarm; mixed low thickness and sheet casting technology.
Sachs mono-shock absorber with completely adjustable piggy-back in: spring preload, wheelbase, hydraulic compression and rebound damping. APS progressive linkage. Wheel travel 130mm
Front Brakes : Dual 320-mm diameter floating stainless steel disc with lightweight stainless steel rotor and aluminium flange with 6 pins. Brembo monobloc radial callipers with 4 34-mm opposite. Sintered pads. Radial pump and metal braided brake hose
Rear Brakes : 220-mm diameter disc; Brembo floating calliper with two 32mm isolated pistons. Pump with integrated tank and metal braided hose
Front Wheel rims : Aluminium alloy rims, 6 split spokes 3.5″X17″
Rear Wheel rims : Aluminium alloy rims, 5 split spokes 6″X17″
Front Tyres Radial tubeless : 120/70 ZR 17
Rear Tyres Radial tubeless : 190/55 ZR 17 (alternative 190/50 ZR 17)
Dimensions Max. length : 2040 mm
Maximum width : 735 mm (at the handlebar)
Maximum height : 1120 mm
Minimum height from the ground : 130 mm
Saddle height : 845 mm
Centre to centre distance : 1420 mm
Trail : 105 mm
Steering angle :24.5°
Kerb weight : 179 kg *
Tank : 17 litres (4-litre reserve)
සදරයෙන් පිලිගන්නවා BIKE HUT එකට.
අදස් යොජනා චොදන ඔක්කොම දෙන්න ඔකෙ.
