Reply to thread

Message: <blockquote data-quote="sp4chamara" data-source="post: 9505731" data-attributes="member: 121416">Dead Phone USB flashing’:This method should be used in the following cases:- The phone to be flashed is not responding any more (e.g. it does notswitch on)- The phone to be flashed starts but contains MCU SW version older thanversion 3.65. In this case, be aware that all the user settings will be lostduring the flashing. When flashing a phone that kind of phone, do notswitch on the phone before the flashing starts.1. Setting up the connection:To allow the flashing of a dead phone, the used connection must be set to‘NO CONNECTION’. To do this, go to File -> Manage ConnectionIn the window ‘Manage Connection’, highlight the ‘NO CONNECTIONS’ barand set it at the first place of the priority list.Press ‘Apply’ button and then close the ‘Manage Connection’ window.2. Setting the product name:Open the product ‘RM-78’ using the menu File -> Open Product3. Flashing the phoneTo perform the flashing, proceed as follows:- Choose menu ‘Flashing -> Firmware update’- Activate button ‘Dead Phone USB flashing’- Choose the variant to be flashedPress ‘Start’ buttonThe flashing starts. After a few seconds the message ‘Cmt->Waiting USBdevice (1 of 30). Press phone’s power button’ appears.Press the phone’s power button. The flashing will be performed</blockquote>

Top Bottom