Reply to thread

Message: <blockquote data-quote="laal" data-source="post: 8537153" data-attributes="member: 94459">SMD Rework StationsSMD(Surface Mounted)  Rework station is used to remove, replace, do re-balling BGA(Ball Grid Alley) chips and SMD components.Make sure that the re-balling station are controllable and match to  standard temperature for PCB's and SMD Electronic Components..It is made of high quality heating material. desoldering and soldering of BGA's are precisely controlled.Air flow and and Temperature are adjustable in wide range to produce high temperature breeze.Movable and Replaceable heating heads and very easy to operate...<img src="http://lh5.ggpht.com/_8JZhVVmpICU/S8QKNCQUaWI/AAAAAAAAAMA/72OP1opqqwk/Rework%20Stations.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />In the market today there are two types of rework station to choose that match your needs and budget.The Oldest type is the Standard Filament Type Rework Station and the latest is called Infrared or IRDA  Rework Station.The Standard Type is Consist of a heating filament which is by then blowned by an air to produce a very hot air temperature.A technical view of an SMD Rework Station with filament and an air  blowing to produce hot temperature air flow... <img src="http://lh6.ggpht.com/_8JZhVVmpICU/S8QKMph3_UI/AAAAAAAAAL8/7pGVohgtjnU/hot%20air.gif" alt="" class="fr-fic fr-dii fr-draggable " style="" />Thermostat adjustment is applied  by controlling the heat temperature and the amount of air to flow.<img src="http://lh4.ggpht.com/_8JZhVVmpICU/S8QUXN3PzyI/AAAAAAAAAMM/7C0cWNR3UGQ/SMD%20analog.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Some  types  of Filament  SMD Rework Station are digital in which the amount  of heat and air were displayed on a seven segment LED and a push button  adjustment  were placed.  <img src="http://lh3.ggpht.com/_8JZhVVmpICU/S8QUW96P6wI/AAAAAAAAAMI/KmDGcsVrKT8/SMD%20digital.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Infrared or IR SMD Rework StationThis one was designed by an Infrared (IR) Technology.Uses infrared heat  wave technology instead of the conventional hot air,  effectively solves  the major problem being encountered when using the  hot air gun, which  is the movement of surrounding components while  reworking.   The small amount of Infrared light is amplified to produce a very high  temperature Lazer Beam.  It is  digitally designed and can be set  automatically.  A simple overview of an IR SMD Rework Station.<img src="http://lh3.ggpht.com/_8JZhVVmpICU/S8QcdYB57ZI/AAAAAAAAAMg/wS83FjXmVjo/SMD%20basic.gif" alt="" class="fr-fic fr-dii fr-draggable " style="" />A set example of an IR SMD rework Station. Note: the Author is not endorsing any product.<img src="http://lh3.ggpht.com/_8JZhVVmpICU/S8QaBmv07GI/AAAAAAAAAMY/TugHNc1GknE/SMD%20ir.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></blockquote>

Verification: Hathara warak wissa keeyada? (Hathara wadi karanna 20)

Top Bottom