Reply to thread

Message: <blockquote data-quote="laal" data-source="post: 9443185" data-attributes="member: 94459">check shorting in 3500....and 3110.check shorting in 3500....and 3110... 1..remove this coil mark in (1)...if u want to check is pf is short,..... 2..remove this coil mark in (2)..if u want to check rf ic is short because rf ic also got +b volt from battery.... 3..remove this coil mark in (3)..if u want to check blutooth ic is short because bluetooth ic also got +b volt from battery.... 4..remove this coil mark in (4)..if u want to check the v.camdig maker ic ..this v.camdig maker ic got +b from batery.... 5..remove this coil mark in (5)..if u want to check the light ic is short.... 6..also check the memory card driver ic n3200 it also got +b it can be check by only removing this ic..... 7..at end remove retu and tahvo ic .. all the component which are mark in pink colur these all are coils these  are place in series and +b of batery is gone throw them so if u remove  the coil u not have to remove ic to check the shorting in pcb it save  time and ur ic .</blockquote>

Top Bottom