Reply to thread

Message: <blockquote data-quote="laal" data-source="post: 9472380" data-attributes="member: 94459">check shorting in nokia n-91.....1..remove this z7500 mark in (1) if u want to check the shoting of pf of  gsm and wcdma ....if remove the coil and ur shoting is gone then tere  is shoting in ur pf of gsm or wcdma ........ 2..remove this coil mark in l7503 (2)...if u want to check the shoting  of rf ic for gsm hinku and rf ic for wcdma vinku.... by removing this  coil if ur shoting is gone then there is shoting in ur rf ic whether it  is hinku or vinku.....under shield..cover.... 3..remove this coil mark in (3)..if u want to check the shorting cause  by (vdac) maker ic n2101 which make vdac for audio-dac ic  n2100.........remove this coil to chec shoting   .....because this ic  got +b from batery.... 4..remove this coil mark in (4)..if u want to check smps ic n4200..  ..this ic make v corea for omap ic and rap remove cil to check shoting  is gone or not..... 5..remove this ic n5000 ape regulator mark in (5)..if u want to check  the shoting is cause by this remove it to check shoting is gone or  not.... 6..remove light ic mark in (6) ... to check the shoting cause by light ic or not.... 7..remove coil mark in (7) ...it is vcam maker ic which make (vdd logic)    ......remove this coil to check shoting because this ic got +b from  batery...... 8..remove coil.  mark in (8)... it is cam maker ic which make (vdd  analog) for camera  ....remove these coil to check shoting .....because  it got +b from batery..... 9..remove bluetooth module mark in (9)... to check shoting ...because it got +b from batery..... 10..remove this coil mark in  (10)...to check the ic n5205 which make  voltage  (vhdd)... for the 4gb & 8gb hard disk......this ic got +b  from batery....... 11..remove wlan pa mark in  (11) ...to check shoting because this ic got +b from batery..... 12..remove wlan ic n6300  mark in (12) ....to check the shoting because this ic got +b from batery..........  all the component which are mark in pink colur these all are coils these  are place in series and +b of batery is gone throw them so if u remove  the coil u not have to remove ic to check the shorting in pcb it save  time and ur ic ....</blockquote>

Verification: Hath warak paha keeyada? (hatha wadikireema paha)

Top Bottom