Reply to thread

Message: <blockquote data-quote="djthiwa" data-source="post: 584017" data-attributes="member: 2716">Motorola d460*#06# for checking the IMEI (International Mobile Equipment Identity)Activate RBS(Note: pause means the * key held in until box appears)To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.De-activate RBSTo de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]This only works with some versions of software.What's the use of RBS:Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected. Motorola 6200Activate RBS(Note: pause means the * key held in until box appears)To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.De-activate RBSTo de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]This only works with some versions of software.These countries has been reported working:UK (Orange)AUWhat's the use of RBS:Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.Pin OutsNumbered left to right, keypad up, battery down1. Audio Ground2. V+3. True data (TD) (input)4. Downlink - Complimentary data (CD) (input)5. Uplink - Return data (RD) (output)6. GND7. Audio Out - on/off8. Audio In9. Manual Test - ???10. Battery Feedback11. Antenna connector Motorola 7500Activate RBS(Note: pause means the * key held in until box appears)To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.De-activate RBSTo de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]This only works with some versions of software.These countries has been reported working:IT (model: F16 HW: 5.2 SW: 2.1)What's the use of RBS:Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.Pin OutsNumbered right to left, keypad up, battery down looking1. Gnd2. Pos3. True data (TD) (input)4. Complimentary data (CD) (input)5. Return data (RD) (output)6. Audio gnd7. Audio out8. Audio in Motorola 8200Activate RBS(Note: pause means the * key held in until box appears)To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.De-activate RBSTo de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]This only works with some versions of software.These countries has been reported working:ES, AU, NL, BEWhat's the use of RBS:Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.Pin OutsNumbered right to left, keypad up, battery down looking1. Audio Ground2. V+3. True data (TD) (input)4. Downlink - Complimentary data (CD) (input)5. Uplink - Return data (RD) (output)6. GND7. Audio Out - on/off8. Audio In9. Manual Test - ???10. Battery Feedback11. Antenna connector Motorola 8400Activate RBS(Note: pause means the * key held in until box appears)To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.De-activate RBSTo de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]This only works with some versions of software.These countries has been reported working:IT, NLWhat's the use of RBS:Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.Pin OutsNumbered left to right, keypad up, battery down1. Audio Ground2. V+3. True data (TD) (input)4. Downlink - Complimentary data (CD) (input)5. Uplink - Return data (RD) (output)6. GND7. Audio Out - on/off8. Audio In9. Manual Test - ???10. Battery Feedback11. Antenna connector Motorola 8700#06# for checking the IMEI (International Mobile Equipment Identity)Activate RBS(Note: pause means the * key held in until box appears)To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.De-activate RBSTo de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]This only works with some versions of software.These countries has been reported working:AU, IT, SG, DE, ES, ZAWhat's the use of RBS:Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected. Motorola V3688*#06# for checking the IMEI (International Mobile Equipment Identity)Enhanced Full Rate Codec (EFR):To Enable EFR press [][][] 119 [] 1 [] OK.To Disable EFR press [][][] 119 [] 0 [] OKNOTE: Nothing appears on Screen. Other Phones from Motorola (CD 160, CD 520, 920, 930)Motorola CD 160Press menu and type one of these numbers and press OK:11 = Status Review13 = Available Networks14 = Preferred Networks22 = Select Keypad Tones25 = Require SIM Card PIN26 = Language Selection32 = Repetitive Timer33 = Single Alert Timer34 = Set IN-Call Display35 = Show Call Timers36 = Show Call Charges37 = Call Charge Settings38 = Reset All Timers43 = Reset All Timers45 = Show Last Call46 = Total For All Calls47 = Lifetime Timer51 = Change Unlock Code52 = Master Reset53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)54 = New Security Code55 = Automatic Lock63 = Battery Saving ModeFree call tip1 Enter the phone number2 Enter OK3 Type *#06#4 Press Button C5 And finally press the button for power off.You should now be able to talk without being billed.Motorola CD 520Free call tip1 Enter the phone number2 Enter OK3 Type *#06#4 Press Button C5 And finally press the button for power off.You should now be able to talk without being billed.Motorola 920/930The 54# Tip:Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the phone number used for with this key when speed dialing.Keyboard lockif you push * and # on the same time your keyboard locked. When you press it again, you unlock your keyboard.Supplementary MenuIf your Motorola CD920 or 930 has the engineering software, you can get an engineering mode by typing : ***113*1*, but you have to maintain each * during 3 sec to get a square. So 3 squares, 113, 1 square, 1, 1 square, CALL.If the software is present you have one supplementary menu. To remove it typ ***113*0* like above.To put the counter to 0 even global counter, just do a reset factory in the Config menu. <a href="http://www.softplatz.com/freeware/motorola-unlock-codes/" target="_blank">http://www.softplatz.com/freeware/motorola-unlock-codes/</a></blockquote>

Verification: Winadiyakata thappara keeyak tibeda?

Top Bottom