Reply to thread

Message: <blockquote data-quote="freak88" data-source="post: 19565180" data-attributes="member: 143412">Step 1: Open the DOS terminal Click Start, type CMD, right-click the Cmd.exe link and select “Run as Administrator”. <img src="http://www.dignited.com/wp-content/uploads/2015/03/DEMO3.gif" alt="" class="fr-fic fr-dii fr-draggable " style="" /> Step 2: Check availability If you want to create WiFi Hotspot firstly you have to check whether the hosted network mode is supported by your machine or not… Enter this command to check availability.. netsh wlan show drivers If you find Hosted network supported : Yes then only you can create WiFi Hotspot Step 3:Creating WiFi Hotspot <img src="http://www.dignited.com/wp-content/uploads/2015/03/copy-paste-and-run.gif" alt="" class="fr-fic fr-dii fr-draggable " style="" /> Now type the following command to create WiFi hotspot: netsh wlan set hostednetwork mode=allow ssid=Name key=8CharacterKey Replace “Name” with the name you’d like to use for your custom network, and “8CharacterKey” with a password that’s a little harder to guess. Start Wi-Fi hotspot by this cmd: netsh wlan start hostednetwork Step 4: No Network Access ? or No Internet Access? <img src="http://www.dignited.com/wp-content/uploads/2015/03/turn-on-sharing1.gif" alt="" class="fr-fic fr-dii fr-draggable " style="" /> nto a wireless Wi-Fi hotspot usb dongle DAVID OKWII 19/03/2015 Tweet Share Share Pin Mail Share After reading my previous post on “The Mi-Fi is the new USB Internet dongle”, Jeff an enthusiastic reader of this blog had a tip for me or rather USB modem users out there. While Mi-Fis as I explained have wireless internet sharing by default, USB dongles don’t. Yet, you might still want to share your USB modem internet with your buddy or a family member at home. If so Jeff has you covered. With the help of your laptop’s Wi-Fi card, you can turn your USB dongle into a Mi-Fi of sorts. But this isn’t for the fainthearted. This right here is for nerds. Step 1: Open the DOS terminal Click Start, type CMD, right-click the Cmd.exe link and select “Run as Administrator”. DEMO3 Step 2: Check availability If you want to create WiFi Hotspot firstly you have to check whether the hosted network mode is supported by your machine or not… Enter this command to check availability.. netsh wlan show drivers If you find Hosted network supported : Yes then only you can create WiFi Hotspot Step 3:Creating WiFi Hotspot copy paste and run Now type the following command to create WiFi hotspot: netsh wlan set hostednetwork mode=allow ssid=Name key=8CharacterKey Replace “Name” with the name you’d like to use for your custom network, and “8CharacterKey” with a password that’s a little harder to guess. Start Wi-Fi hotspot by this cmd: netsh wlan start hostednetwork Step 4: No Network Access ? or No Internet Access? turn on sharing1 Now click Control Panel — Network and Internet — Network and Sharing Center Click on Internet Connection you want to share (Broadband Connection) Properties — Sharing Tab- Check Allow other network users to connect through this computer’s internet connection.. And in drop down list select your virtual adapter’s (WiFi Hotspot’s) connection.. You are done with your WiFi Hotspot. <img src="/styles/default/xenforo/smilies/default/happy.gif"  class="smilie" loading="lazy" alt=":)" title="Happy    :)" data-shortname=":)" /></blockquote>

Verification: Hata thunen beduwama keeyada? (60 bedeema thuna)

Top Bottom