Ram Help ekak onee,Aneee machanzzlaaa tak gala

Altire

Active member
  • Aug 31, 2009
    651
    58
    28
    parallel world
    mekai mama Foxconn G31 board ekakui 2gb kingston ram ekakui gathta,mama gawa thibba parana 1gb ekai aluth 2gb ekai dekama gahuwama on wenawa.eth 2gb eka witharak gahuwama on wenne nahe neee.

    pleaseee udaw karanna mata patasss gala loku help ekak
     

    Altire

    Active member
  • Aug 31, 2009
    651
    58
    28
    parallel world
    nahe machan mama ona tharam bios nam update korala thiyenawa,eth meka ada hawasa genapu board eka ban mata newei ape cousin kenekta,replacement borad ekak widiyata genawee
     

    nilanga06

    Active member
  • Mar 1, 2007
    750
    184
    43
    @@@@@@@@@@@@@
    ohh passe ne dakke hariyatama. balahan ram 2k speed 1 keeyada kiyala. 2gb 1k wenas athi. 2ma gahuwama wada karanawa nan balapan ethakota 3gb da 1 gb da memory pennanne kiyala.
     
    Last edited:

    Altire

    Active member
  • Aug 31, 2009
    651
    58
    28
    parallel world
    ow machan 1gb ekai 2gb ekai dekama gahuwama 3gb pennanawa.1gb eka witharak gahuwama wada karanawa,eth 2gb eka witharak thaniyen wada karanne nahe,dekama gahuwama wada.
     

    Altire

    Active member
  • Aug 31, 2009
    651
    58
    28
    parallel world
    nahe machan MB eke awlak nahe board dekaka ma check kara Winsoft technologies eken gathte PC house eke.2gb eke speed eka 800mhz kiyala gahala thiyenne eth 1gb also 800 but both running on 667, dont know why
     

    Altire

    Active member
  • Aug 31, 2009
    651
    58
    28
    parallel world
    NAHE MACHAN MAMA hithanne G31 chipset Gigabyte,Foxconn ewata direct 2gb kingston ram support nahe.mama memory capability list ekath baluwa.ewage supporting list eke kingston 2gb ewa nahe ban.wena brands nam thiyenawa
     

    mr.tikko

    Member
    Nov 19, 2010
    1,699
    399
    0
    1GB eka 800mhz da... 667 da. if not work after changing slots even.. Change bios to 667.. and try.

    As manuals Support upto 2GB per 1 slot. 4GB is the Maximum.

    Make sure your mother board compatible with dual channel.

    Dual channel is a feature of the motherboard, not the memory. As long as you have a matched pair of memory sticks & they're placed in the proper two slots, dual channel mode *should* automatically enable. If you have a cheaper board that only has two memory slots, it's a no-brainer.
    You should always manually configure your memory settings in the BIOS, especially the voltage. According to the JEDEC standard, all DDR2 memory is supposed to run at 1.8v, however, most of the so-called 'performance memory' can require voltage as high as 2.2 - 2.4v. Check the documentation that came with your RAM or the sticker on the RAM itself. If the timings & voltage isn't listed, go to the Kingston website & look it up, then set your BIOS accordingly.


    Best of luck
     

    thusi02

    Well-known member
  • Oct 18, 2007
    4,172
    60
    48
    Minuwangoda
    Bus Sped eka change karapan This 1 Gb should BE 667 and 2 Gb should BE 800..datz de reason..change speed as 800 from bios..

    Then it should work..