ඔන්න ඉදල ඉදල ගෙනාව phone use කරන කට්ටියට වැදගත් වෙන දෙයක්.
ඔයාලට වැදගත් වෙයි කියල හිතුන නම් සලකල යන්න ඉතින් මටත්.බලල බම්ප් එකක් වත් දාල යන්න හොදේ .....අපිට සැලකුවොත් අපිත් සලකනවා .....++++++++++++++++
Nokia Phone Codes
*3370# This Nokia code activates Enhanced Full Rate Codec (EFR) – Your Nokia cell phone uses the best sound quality but talk time is reduced my approx. 5%
#3370# Deactivate Enhanced Full Rate Codec (EFR) .
*#4720# Activate Half Rate Codec – Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.
*#4720# With this Nokia code you can deactivate the Half Rate Codec.
*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type .
*#9999# Phones software version if *#0000# does not work.
*#06# For checking the International Mobile Equipment Identity (IMEI Number) .
#pw+1234567890+1# Provider Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).
#pw+1234567890+2# Network Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols) .
#pw+1234567890+3# Country Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).
#pw+1234567890+4# SIM Card Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols) .
*#147# This lets you know who called you last (Only vodofone).
*#1471# Last call (Only vodofone) .
*#21# This phone code allows you to check the number that “All Calls” are diverted to.
*#2640# Displays phone security code in use .
*#30# Lets you see the private number.
*#43# Allows you to check the “Call Waiting” status of your cell phone.
*#61# Allows you to check the number that “On No Reply” calls are diverted to .
*#62# Allows you to check the number that “Divert If Unreachable (no service)” calls are diverted to .
*#67# Allows you to check the number that “On Busy Calls” are diverted to
*#67705646# Phone code that removes operator logo on 3310 & 3330
*#73# Reset phone timers and game scores.
*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature “SIM Clock Stop Allowed”, it means you will get the best standby time possible .
*#7760# Manufactures code.
*#7780# Restore factory settings.
*#8110# Software version for the nokia 8110.
*#92702689# Displays – 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again.
*#94870345123456789# Deactivate the PWM-Mem.
**21*number# Turn on “All Calls” diverting to the phone number entered.
**61*number# Turn on “No Reply” diverting to the phone number entered .
**67*number# Turn on “On Busy” diverting to the phone number entered .
12345 This is the default security code .
press and hold #Lets you switch between lines.
Sony Ericsson Secret Codes
Here are some of the codes we found on the internet. These code have not been tested by LankaPhones team. However we found positive response on the various forums on the use of these codes. You also can try them at your own risk. Some codes may not work in your phone as the code may be model dependent.
Reset English Menu: *#0000#
Programming Menu (Long): 923885 + >
Field Test: 904090 + > (to exit 904090 + >)
Phone Test: 904059 + > (to exit 3 + <)
Analog Mode: 904095 + menu DM mode 904959 + menu
Secret menu / Software version: >*<<*<*
Reset Theme <0000>
Network Information <**<
Lock status: <- * * <-
Shortcut to last dialed numbers: 0#
Default Language: < 0 0 0 0 >
Shortcut to sim numbers: On main menu type a number and press #
Programming Checks: >*<<*<*> or >*<<*<*>
Phone Test: 904059 + > (to exit 3 + <)
Opening phone without a SIM card: **04*0000*0000*0000# followed by on ‘Wrong Pin’ number
Programming Menu (Short): 987 + >
Samsung Secret Codes
Here are some of Samsung Mobile Secret Codes we found on the internet.Although we have noted users positive comments on the use of these codes, we have not tested these codes. Try them at your own risk.
Serial number: *#0001#
Battery status- Memory capacity : *#9998*246#
Debug screen: *#9998*324# – *#8999*324#
LCD kontrast: *#9998*523#
Vibration test: *#9998*842# – *#8999*842#
Alarm beeper – Ringtone test : *#9998*289# – *#8999*289#
Smiley: *#9125#
Software version: *#0837#
Display contrast: *#0523# – *#8999*523#
Battery info: *#0228# or *#8999*228#
Display storage capacity: *#8999*636#
Display SIM card information: *#8999*778#
Show date and alarm clock: *#8999*782#
The display during warning: *#8999*786#
Samsung hardware version: *#8999*837#
Show network information: *#8999*638#
Display received channel number and received intensity: *#8999*9266#
*#1111# S/W Version
*#1234# Firmware Version
*#2222# H/W Version
*#8999*8376263# All Versions Together
*#8999*8378# Test Menu
*#4777*8665# GPSR Tool
*#8999*523# LCD Brightness
*#8999*377# Error LOG Menu
*#8999*327# EEP Menu
*#8999*667# Debug Mode
*#92782# PhoneModel (Wap)
#*5737425# JAVA Mode
*#2255# Call List
*#232337# Bluetooth MAC Address
*#5282837# Java Version
Type in *#0000# on a Samsung A300 to reset the language
Master reset (unlock) #*7337# (for the new samsungs E700 x600 but not E710)
Samsung E700 type *#2255# to show secret call log (not tested)
Samsung A300, A800 phone unlock enter this *2767*637#
Samsung V200, S100, S300 phone unlock : *2767*782257378#
#*4773# Incremental Redundancy
#*7785# Reset wakeup & RTK timer cariables/variables
#*7200# Tone Generator Mute
#*3888# BLUETOOTH Test mode
#*7828# Task screen
#*#8377466# S/W Version & H/W Version
#*2562# Restarts Phone
#*2565# No Blocking? General Defense.
#*3353# General Defense, Code Erased.
#*3837# Phone Hangs on White screen.
#*3849# Restarts Phone
#*7337# Restarts Phone (Resets Wap Settings)
#*2886# AutoAnswer ON/OFF
#*7288# GPRS Detached/Attached
#*7287# GPRS Attached
#*7666# White Screen
#*7693# Sleep Deactivate/Activate
#*2286# Databattery
#*2527# GPRS switching set to (Class 4, 8, 9, 10)
#*2679# Copycat feature Activa/Deactivate
#*3940# External looptest 9600 bps
#*4263# Handsfree mode Activate/Deactivate
#*2558# Time ON
#*3941# External looptest 115200 bps
#*5176# L1 Sleep
#*7462# SIM Phase
#*7983# Voltage/Freq
#*7986# Voltage
#*8466# Old Time
#*2255# Call Failed
#*5376# DELETE ALL SMS!!!!
#*6837# Official Software Version: (0003000016000702)
#*2337# Permanent Registration Beep
#*2474# Charging Duration
#*2834# Audio Path (Handsfree)
#*3270# DCS Support Activate/Deactivate
#*3282# Data Activate/Deactivate
#*3476# EGSM Activate/Deactivate
#*3676# FORMAT FLASH VOLUME!!!
#*4760# GSM Activate/Deactivate
#*4864# White Screen
#*7326# Accessory
#*7683# Sleep variable
#*3797# Blinks 3D030300 in RED
#*7372# Resetting the time to DPB variables
#*3273# EGPRS multislot (Class 4, 8, 9, 10)
#*7722# RLC bitmap compression Activate/Deactivate
#*2351# Blinks 1347E201 in RED
#*2775# Switch to 2 inner speaker
#*7878# FirstStartup (0=NO, 1=YES)
#*3838# Blinks 3D030300 in RED
#*2077# GPRS Switch
#*2027# GPRS Switch
#*0227# GPRS Switch
#*0277# GPRS Switch
#*22671# AMR REC START
#*22672# Stop AMR REC (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)
#*22673# Pause REC
#*22674# Resume REC
#*22675# AMR Playback
#*22676# AMR Stop Play
#*22677# Pause Play
#*22678# Resume Play
#*77261# PCM Rec Req
#*77262# Stop PCM Rec
#*77263# PCM Playback
#*77264# PCM Stop Play
#*22679# AMR Get Time
*#8999*364# Watchdog ON/OFF
*#8999*427# WATCHDOG signal route setup
*2767*3855# = Full Reset (Caution every stored data will be deleted.)
*2767*2878# = Custom Reset
*2767*927# = Wap Reset
*2767*226372# = Camera Reset (deletes photos)
*2767*688# Reset Mobile TV
#7263867# = RAM Dump (On or Off)
Android Phone Codes
All codes have been checked on Samsung Galaxy I7500 only. But they should also work in other Google Android phones. Try them at your own risk.
*#*#4636#*#*
This code can be used to get some interesting information about your phone and battery. It shows following 4 menus on screen:
Phone information
Battery information
Battery history
Usage statistics
*#*#7780#*#*
This code can be used for a factory data reset. It’ll remove following things:
Google account settings stored in your phone
System and application data and settings
Downloaded applications
It’ll NOT remove:
Current system software and bundled applications
SD card files e.g. photos, music files, etc.
PS: Once you give this code, you get a prompt screen asking you to click on “Reset phone” button. So you get a chance to cancel your operation.
*2767*3855#
Think before you give this code. This code is used for factory format. It’ll remove all files and settings including the internal memory storage. It’ll also reinstall the phone firmware.
PS: Once you give this code, there is no way to cancel the operation unless you remove the battery from the phone. So think twice before giving this code.
*#*#34971539#*#*
This code is used to get information about phone camera. It shows following 4 menus:
Update camera firmware in image (Don’t try this option)
Update camera firmware in SD card
Get camera firmware version
Get firmware update count
WARNING: Never use the first option otherwise your phone camera will stop working and you’ll need to take your phone to service center to reinstall camera firmware.
*#*#7594#*#*
This code can be used to change the “End Call / Power” button action in your phone. Be default, if you long press the button, it shows a screen asking you to select any option from Silent mode, Airplane mode and Power off.
You can change this action using this code. You can enable direct power off on this button so you don’t need to waste your time in selecting the option.
*#*#273283*255*663282*#*#*
This code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo.
*#*#197328640#*#*
This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.
WLAN, GPS and Bluetooth Test Codes:
*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* – WLAN test (Use “Menu” button to start various tests)
*#*#232338#*#* – Shows WiFi MAC address
*#*#1472365#*#* – GPS test
*#*#1575#*#* – Another GPS test
*#*#232331#*#* – Bluetooth test
*#*#232337#*# – Shows Bluetooth device address
*#*#8255#*#*
This code can be used to launch GTalk Service Monitor.
Codes to get Firmware version information:
*#*#4986*2650468#*#* – PDA, Phone, H/W, RFCallDate
*#*#1234#*#* – PDA and Phone
*#*#1111#*#* – FTA SW Version
*#*#2222#*#* – FTA HW Version
*#*#44336#*#* – PDA, Phone, CSC, Build Time, Changelist number
Codes to launch various Factory Tests:
*#*#0283#*#* – Packet Loopback
*#*#0*#*#* – LCD test
*#*#0673#*#* OR *#*#0289#*#* – Melody test
*#*#0842#*#* – Device test (Vibration test and BackLight test)
*#*#2663#*#* – Touch screen version
*#*#2664#*#* – Touch screen test
*#*#0588#*#* – Proximity sensor test
*#*#3264#*#* – RAM version
BlackBerry Secret Codes
Here is a collection of some BlackBerry codes found on the internet. We have not tested most of them,although we have seen positive comments by the users in forums. Try them at your own risk.
Decibelmeter.
Displaysyour signal strength in decibels, instead of bars.
Hold”Alt” and press “N”, “M”, “L”,”L” (repeat to reverse the effect).
AddressBook file verification.
Checksthe data in your Address Book for inconsistencies.
Inthe Address Book, hold “Alt” and press “V”, “A”,”L”, “D”.
AddressBook data structure rebuild.
Forcesa data structure re-build in the Address Book…
Inthe Address Book, hold “Alt” and press “R”, “B”,”L”, “D”.
Viewsource code.
Displaysthe source code of a Web page.
Inthe Browser, hold “Alt” and press “R”, “B”,”V”, “S”.
HelpMe! menu.
Providescrucial technical information about your device, for when seeking technicalsupport or help in forums…
Hold”Alt” and (left) “shift”, then press “H”.
SoftReset.
Performsa “soft” reset of your device; the equivalent of doing a”battery pull” (ie. Removing the battery for a few seconds).
Press-and-hold”Alt”, then press-and-hold (left) “shift”, thenpress-and-hold “Del”.
EventLog.
Displaysevent logs of all the system-level events that occur on your device…
Hold”Alt” and press “L”, “G”, “L”,”G”.
Insome cases, you will need to be on the Home screen when you enter these codes.
Keyshortcuts:
Aor C = phonebook
S= search
F= phone profiles
Wor B = browser
H= help
K= locks the keys
L= calendar
V= messages
M= messages folder
R= alarm
T= tasks
U= calculator
I= applications
O= options
P= phone
T- Top of page (in browser)
B- Bottom of page (in browser)
Space- Page down (in browser)
ALT+ Right Shift + Del = hard reset
D- Memo pad
U- Switch between hide/unhide in title bar (in browser)
ALT+ NMLL = numbers instead of bars for signal strength
LG Phone Codes
Here are some of LG Phone Codes we found on the internet. Please note although we noted positive comments in the users in various forums, we cannot guarantee the success of the codes. Code may be model dependent. Try them at your own risk!
2945#*# Access the test mode of the set
2945*#01*# Use to display the secret menu of LG mobile set
*8375# Use to display the mobile software version
2945#*70001# Use to manage Sim lock menu for LG (LG 7010, 7020)
277634#*# To set the default settings of mobile
1945#*5101# Use to manage Sim lock menu for LG (LG B1200)
2945#*5101# Use to manage Sim lock menu for(LG 5200, 510W )
2947#* Use to manage Sim lock menu for (LG 500, 600)
47328545454# To set the default settings of mobile
*#07# To display the SW and IMEI Number
277634#*# To remove the security codes of LG sets
*6861 # To recount checksum
##2342 Apply to resets the set advanced settings
##786 Used to reset the mobile memory and life timer
##889 To Enable the TTY
#PWR668 To perform the Factory test
ඔයාලට වැදගත් වෙයි කියල හිතුන නම් සලකල යන්න ඉතින් මටත්.බලල බම්ප් එකක් වත් දාල යන්න හොදේ .....අපිට සැලකුවොත් අපිත් සලකනවා .....++++++++++++++++
Nokia Phone Codes
*3370# This Nokia code activates Enhanced Full Rate Codec (EFR) – Your Nokia cell phone uses the best sound quality but talk time is reduced my approx. 5%
#3370# Deactivate Enhanced Full Rate Codec (EFR) .
*#4720# Activate Half Rate Codec – Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.
*#4720# With this Nokia code you can deactivate the Half Rate Codec.
*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type .
*#9999# Phones software version if *#0000# does not work.
*#06# For checking the International Mobile Equipment Identity (IMEI Number) .
#pw+1234567890+1# Provider Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).
#pw+1234567890+2# Network Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols) .
#pw+1234567890+3# Country Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).
#pw+1234567890+4# SIM Card Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols) .
*#147# This lets you know who called you last (Only vodofone).
*#1471# Last call (Only vodofone) .
*#21# This phone code allows you to check the number that “All Calls” are diverted to.
*#2640# Displays phone security code in use .
*#30# Lets you see the private number.
*#43# Allows you to check the “Call Waiting” status of your cell phone.
*#61# Allows you to check the number that “On No Reply” calls are diverted to .
*#62# Allows you to check the number that “Divert If Unreachable (no service)” calls are diverted to .
*#67# Allows you to check the number that “On Busy Calls” are diverted to
*#67705646# Phone code that removes operator logo on 3310 & 3330
*#73# Reset phone timers and game scores.
*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature “SIM Clock Stop Allowed”, it means you will get the best standby time possible .
*#7760# Manufactures code.
*#7780# Restore factory settings.
*#8110# Software version for the nokia 8110.
*#92702689# Displays – 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again.
*#94870345123456789# Deactivate the PWM-Mem.
**21*number# Turn on “All Calls” diverting to the phone number entered.
**61*number# Turn on “No Reply” diverting to the phone number entered .
**67*number# Turn on “On Busy” diverting to the phone number entered .
12345 This is the default security code .
press and hold #Lets you switch between lines.
Sony Ericsson Secret Codes
Here are some of the codes we found on the internet. These code have not been tested by LankaPhones team. However we found positive response on the various forums on the use of these codes. You also can try them at your own risk. Some codes may not work in your phone as the code may be model dependent.
Reset English Menu: *#0000#
Programming Menu (Long): 923885 + >
Field Test: 904090 + > (to exit 904090 + >)
Phone Test: 904059 + > (to exit 3 + <)
Analog Mode: 904095 + menu DM mode 904959 + menu
Secret menu / Software version: >*<<*<*
Reset Theme <0000>
Network Information <**<
Lock status: <- * * <-
Shortcut to last dialed numbers: 0#
Default Language: < 0 0 0 0 >
Shortcut to sim numbers: On main menu type a number and press #
Programming Checks: >*<<*<*> or >*<<*<*>
Phone Test: 904059 + > (to exit 3 + <)
Opening phone without a SIM card: **04*0000*0000*0000# followed by on ‘Wrong Pin’ number
Programming Menu (Short): 987 + >
Samsung Secret Codes
Here are some of Samsung Mobile Secret Codes we found on the internet.Although we have noted users positive comments on the use of these codes, we have not tested these codes. Try them at your own risk.
Serial number: *#0001#
Battery status- Memory capacity : *#9998*246#
Debug screen: *#9998*324# – *#8999*324#
LCD kontrast: *#9998*523#
Vibration test: *#9998*842# – *#8999*842#
Alarm beeper – Ringtone test : *#9998*289# – *#8999*289#
Smiley: *#9125#
Software version: *#0837#
Display contrast: *#0523# – *#8999*523#
Battery info: *#0228# or *#8999*228#
Display storage capacity: *#8999*636#
Display SIM card information: *#8999*778#
Show date and alarm clock: *#8999*782#
The display during warning: *#8999*786#
Samsung hardware version: *#8999*837#
Show network information: *#8999*638#
Display received channel number and received intensity: *#8999*9266#
*#1111# S/W Version
*#1234# Firmware Version
*#2222# H/W Version
*#8999*8376263# All Versions Together
*#8999*8378# Test Menu
*#4777*8665# GPSR Tool
*#8999*523# LCD Brightness
*#8999*377# Error LOG Menu
*#8999*327# EEP Menu
*#8999*667# Debug Mode
*#92782# PhoneModel (Wap)
#*5737425# JAVA Mode
*#2255# Call List
*#232337# Bluetooth MAC Address
*#5282837# Java Version
Type in *#0000# on a Samsung A300 to reset the language
Master reset (unlock) #*7337# (for the new samsungs E700 x600 but not E710)
Samsung E700 type *#2255# to show secret call log (not tested)
Samsung A300, A800 phone unlock enter this *2767*637#
Samsung V200, S100, S300 phone unlock : *2767*782257378#
#*4773# Incremental Redundancy
#*7785# Reset wakeup & RTK timer cariables/variables
#*7200# Tone Generator Mute
#*3888# BLUETOOTH Test mode
#*7828# Task screen
#*#8377466# S/W Version & H/W Version
#*2562# Restarts Phone
#*2565# No Blocking? General Defense.
#*3353# General Defense, Code Erased.
#*3837# Phone Hangs on White screen.
#*3849# Restarts Phone
#*7337# Restarts Phone (Resets Wap Settings)
#*2886# AutoAnswer ON/OFF
#*7288# GPRS Detached/Attached
#*7287# GPRS Attached
#*7666# White Screen
#*7693# Sleep Deactivate/Activate
#*2286# Databattery
#*2527# GPRS switching set to (Class 4, 8, 9, 10)
#*2679# Copycat feature Activa/Deactivate
#*3940# External looptest 9600 bps
#*4263# Handsfree mode Activate/Deactivate
#*2558# Time ON
#*3941# External looptest 115200 bps
#*5176# L1 Sleep
#*7462# SIM Phase
#*7983# Voltage/Freq
#*7986# Voltage
#*8466# Old Time
#*2255# Call Failed
#*5376# DELETE ALL SMS!!!!
#*6837# Official Software Version: (0003000016000702)
#*2337# Permanent Registration Beep
#*2474# Charging Duration
#*2834# Audio Path (Handsfree)
#*3270# DCS Support Activate/Deactivate
#*3282# Data Activate/Deactivate
#*3476# EGSM Activate/Deactivate
#*3676# FORMAT FLASH VOLUME!!!
#*4760# GSM Activate/Deactivate
#*4864# White Screen
#*7326# Accessory
#*7683# Sleep variable
#*3797# Blinks 3D030300 in RED
#*7372# Resetting the time to DPB variables
#*3273# EGPRS multislot (Class 4, 8, 9, 10)
#*7722# RLC bitmap compression Activate/Deactivate
#*2351# Blinks 1347E201 in RED
#*2775# Switch to 2 inner speaker
#*7878# FirstStartup (0=NO, 1=YES)
#*3838# Blinks 3D030300 in RED
#*2077# GPRS Switch
#*2027# GPRS Switch
#*0227# GPRS Switch
#*0277# GPRS Switch
#*22671# AMR REC START
#*22672# Stop AMR REC (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)
#*22673# Pause REC
#*22674# Resume REC
#*22675# AMR Playback
#*22676# AMR Stop Play
#*22677# Pause Play
#*22678# Resume Play
#*77261# PCM Rec Req
#*77262# Stop PCM Rec
#*77263# PCM Playback
#*77264# PCM Stop Play
#*22679# AMR Get Time
*#8999*364# Watchdog ON/OFF
*#8999*427# WATCHDOG signal route setup
*2767*3855# = Full Reset (Caution every stored data will be deleted.)
*2767*2878# = Custom Reset
*2767*927# = Wap Reset
*2767*226372# = Camera Reset (deletes photos)
*2767*688# Reset Mobile TV
#7263867# = RAM Dump (On or Off)
Android Phone Codes
All codes have been checked on Samsung Galaxy I7500 only. But they should also work in other Google Android phones. Try them at your own risk.
*#*#4636#*#*
This code can be used to get some interesting information about your phone and battery. It shows following 4 menus on screen:
Phone information
Battery information
Battery history
Usage statistics
*#*#7780#*#*
This code can be used for a factory data reset. It’ll remove following things:
Google account settings stored in your phone
System and application data and settings
Downloaded applications
It’ll NOT remove:
Current system software and bundled applications
SD card files e.g. photos, music files, etc.
PS: Once you give this code, you get a prompt screen asking you to click on “Reset phone” button. So you get a chance to cancel your operation.
*2767*3855#
Think before you give this code. This code is used for factory format. It’ll remove all files and settings including the internal memory storage. It’ll also reinstall the phone firmware.
PS: Once you give this code, there is no way to cancel the operation unless you remove the battery from the phone. So think twice before giving this code.
*#*#34971539#*#*
This code is used to get information about phone camera. It shows following 4 menus:
Update camera firmware in image (Don’t try this option)
Update camera firmware in SD card
Get camera firmware version
Get firmware update count
WARNING: Never use the first option otherwise your phone camera will stop working and you’ll need to take your phone to service center to reinstall camera firmware.
*#*#7594#*#*
This code can be used to change the “End Call / Power” button action in your phone. Be default, if you long press the button, it shows a screen asking you to select any option from Silent mode, Airplane mode and Power off.
You can change this action using this code. You can enable direct power off on this button so you don’t need to waste your time in selecting the option.
*#*#273283*255*663282*#*#*
This code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo.
*#*#197328640#*#*
This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.
WLAN, GPS and Bluetooth Test Codes:
*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* – WLAN test (Use “Menu” button to start various tests)
*#*#232338#*#* – Shows WiFi MAC address
*#*#1472365#*#* – GPS test
*#*#1575#*#* – Another GPS test
*#*#232331#*#* – Bluetooth test
*#*#232337#*# – Shows Bluetooth device address
*#*#8255#*#*
This code can be used to launch GTalk Service Monitor.
Codes to get Firmware version information:
*#*#4986*2650468#*#* – PDA, Phone, H/W, RFCallDate
*#*#1234#*#* – PDA and Phone
*#*#1111#*#* – FTA SW Version
*#*#2222#*#* – FTA HW Version
*#*#44336#*#* – PDA, Phone, CSC, Build Time, Changelist number
Codes to launch various Factory Tests:
*#*#0283#*#* – Packet Loopback
*#*#0*#*#* – LCD test
*#*#0673#*#* OR *#*#0289#*#* – Melody test
*#*#0842#*#* – Device test (Vibration test and BackLight test)
*#*#2663#*#* – Touch screen version
*#*#2664#*#* – Touch screen test
*#*#0588#*#* – Proximity sensor test
*#*#3264#*#* – RAM version
BlackBerry Secret Codes
Here is a collection of some BlackBerry codes found on the internet. We have not tested most of them,although we have seen positive comments by the users in forums. Try them at your own risk.
Decibelmeter.
Displaysyour signal strength in decibels, instead of bars.
Hold”Alt” and press “N”, “M”, “L”,”L” (repeat to reverse the effect).
AddressBook file verification.
Checksthe data in your Address Book for inconsistencies.
Inthe Address Book, hold “Alt” and press “V”, “A”,”L”, “D”.
AddressBook data structure rebuild.
Forcesa data structure re-build in the Address Book…
Inthe Address Book, hold “Alt” and press “R”, “B”,”L”, “D”.
Viewsource code.
Displaysthe source code of a Web page.
Inthe Browser, hold “Alt” and press “R”, “B”,”V”, “S”.
HelpMe! menu.
Providescrucial technical information about your device, for when seeking technicalsupport or help in forums…
Hold”Alt” and (left) “shift”, then press “H”.
SoftReset.
Performsa “soft” reset of your device; the equivalent of doing a”battery pull” (ie. Removing the battery for a few seconds).
Press-and-hold”Alt”, then press-and-hold (left) “shift”, thenpress-and-hold “Del”.
EventLog.
Displaysevent logs of all the system-level events that occur on your device…
Hold”Alt” and press “L”, “G”, “L”,”G”.
Insome cases, you will need to be on the Home screen when you enter these codes.
Keyshortcuts:
Aor C = phonebook
S= search
F= phone profiles
Wor B = browser
H= help
K= locks the keys
L= calendar
V= messages
M= messages folder
R= alarm
T= tasks
U= calculator
I= applications
O= options
P= phone
T- Top of page (in browser)
B- Bottom of page (in browser)
Space- Page down (in browser)
ALT+ Right Shift + Del = hard reset
D- Memo pad
U- Switch between hide/unhide in title bar (in browser)
ALT+ NMLL = numbers instead of bars for signal strength
LG Phone Codes
Here are some of LG Phone Codes we found on the internet. Please note although we noted positive comments in the users in various forums, we cannot guarantee the success of the codes. Code may be model dependent. Try them at your own risk!
2945#*# Access the test mode of the set
2945*#01*# Use to display the secret menu of LG mobile set
*8375# Use to display the mobile software version
2945#*70001# Use to manage Sim lock menu for LG (LG 7010, 7020)
277634#*# To set the default settings of mobile
1945#*5101# Use to manage Sim lock menu for LG (LG B1200)
2945#*5101# Use to manage Sim lock menu for(LG 5200, 510W )
2947#* Use to manage Sim lock menu for (LG 500, 600)
47328545454# To set the default settings of mobile
*#07# To display the SW and IMEI Number
277634#*# To remove the security codes of LG sets
*6861 # To recount checksum
##2342 Apply to resets the set advanced settings
##786 Used to reset the mobile memory and life timer
##889 To Enable the TTY
#PWR668 To perform the Factory test
