Some of these may be the same, I could not look through all of them, especially since

[Billl Gates]

Quote:
Nokia code
Code function


*3370#
This Nokia code activates Enhanced Full Rate Codec (EFR) - Your Nokia cell phone uses the best sound quality but talk time is reduced my approx. 5%


#3370#
Deactivate Enhanced Full Rate Codec (EFR)


*#4720#
Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time


*#4720#
With this Nokia code you can deactivate the Half Rate Codec


*#0000#
Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type


*#9999#
Phones software version if *#0000# does not work


*#06#
For checking the International Mobile Equipment Identity (IMEI Number)


#pw+1234567890+1#
Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)


#pw+1234567890+2#
Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)


#pw+1234567890+3#
Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)


#pw+1234567890+4#
SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)


*#147#
This lets you know who called you last (Only vodofone)


*#1471#
Last call (Only vodofone)


*#21#
This phone code allows you to check the number that "All Calls" are diverted to


*#2640#
Displays phone security code in use


*#30#
Lets you see the private number


*#43#
Allows you to check the "Call Waiting" status of your cell phone.


*#61#
Allows you to check the number that "On No Reply" calls are diverted to


*#62#
Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to


*#67#
Allows you to check the number that "On Busy Calls" are diverted to


*#67705646#
Phone code that removes operator logo on 3310 & 3330


*#73#
Reset phone timers and game scores


*#746025625#
Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible


*#7760#
Manufactures code


*#7780#
Restore factory settings


*#8110#
Software version for the nokia 8110


*#92702689#
Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again


*#94870345123456789#
Deactivate the PWM-Mem


**21*number#
Turn on "All Calls" diverting to the phone number entered


**61*number#
Turn on "No Reply" diverting to the phone number entered


**67*number#
Turn on "On Busy" diverting to the phone number entered


12345
This is the default security code


press and hold #
Lets you switch between lines[/b]

 

[Billl Gates]

Quote:
All Codes that I know for 6600

*#06# Serial Number/IMEI indicates

*#0000# SW version (e.g. V3.42.1, 16-10-03, NHL-10)

*#2820# Bluetooth (BT) device address

xx# Directory quick access (xx = storage location and afterwards lozenge e.g. 24 #)

On/Off key -short pressing for menu for switching between profiles

Menu key - Long pressing for "task manager" - switching between active programs (with "C" key programs can be terminated.)

Menu quick access - Over in the menu e.g. to point 3.1 arrive simply 31 enter (if the third symbol a file is opened is for these and then in it started the first Programm/Icon).

No Autostart - When switching the phone on up to the pin inquiry press the whole time the "ABC" key (pen) - this is to ignore the autoinitialization programs (and the MMC programs) - "safeboot".


12345 ... is according to be the standard Nokia nokia-securitycode.

0000 ... is according to be standard PIN2 at Vodafone (germany)


Caution - starting from here the codes are "dangerous"

*#7370925538#
*#Res0Wallet#
... is to delete the code around the "wallet"
Input like normal telephone number (not in wallet code inquiry windows).
NOTE! Afterwards the "wallet" is empty, can again be put on however with new code.

*#7780# - Reset to original settings
NOTE! Afterwards various "attitudes" are away - among other things these:
Points of entrance (Provider dependent points of entrance and attitudes)
Bluetooth attitudes
Favorite
Allocation of the two keys (beside Navi keys) in the main menue
Profiles are "neglected" (as with distribution) - still there however new bell tones, etc. are...
SMS/MMS/E Mail attitudes
Logos and spielstaende (allegedly) also deleted...
Programs, calendars and contacts, etc. not changed...

*#7370# - Soft format - resets all the telefone Memory (like Formatting a disk Smile
NOTE! Battery should be full up to at least 75%, do not accomplish during the procedure under any circumstances ! The procedure takes some minutes (approx. 3-4)

Green, * 3 - Hard format: If the Mobile (only telephone memory) formats, puts back the attitudes (see * to # 7780 #) and implements a RESET.
NOTE! Battery should be full up to at least 75%, do not accomplish during the procedure under any circumstances ! The procedure takes some minutes (approx. 3-4)

Proceeding: Equipment switch off, keep "green key" (take off) at the same time pressed, "*" and to "3" key and switch the equipment on (the keys thereby keep further pressed)... to "Formatting" on the display appears...

 

[Billl Gates]

Nokia code Code function
*3370# This Nokia code activates Enhanced Full Rate Codec (EFR) - Your Nokia cell phone uses the best sound quality but talk time is reduced my approx. 5%
#3370# Deactivate Enhanced Full Rate Codec (EFR)
*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time
*#4720# With this Nokia code you can deactivate the Half Rate Codec
*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type
*#9999# Phones software version if *#0000# does not work
*#06# For checking the International Mobile Equipment Identity (IMEI Number)
#Site-O-Crap+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
#Site-O-Crap+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
#Site-O-Crap+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
#Site-O-Crap+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
*#147# This lets you know who called you last (Only vodofone)
*#1471# Last call (Only vodofone)
*#21# This phone code allows you to check the number that "All Calls" are diverted to
*#2640# Displays phone security code in use
*#30# Lets you see the private number
*#43# Allows you to check the "Call Waiting" status of your cell phone.
*#61# Allows you to check the number that "On No Reply" calls are diverted to
*#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to
*#67# Allows you to check the number that "On Busy Calls" are diverted to
*#67705646# Phone code that removes operator logo on 3310 & 3330
*#73# Reset phone timers and game scores
*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible
*#7760# Manufactures code
*#7780# Restore factory settings
*#8110# Software version for the nokia 8110
*#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again
*#94870345123456789# Deactivate the Site-O-Crap-Mem
**21*number# Turn on "All Calls" diverting to the phone number entered
**61*number# Turn on "No Reply" diverting to the phone number entered
**67*number# Turn on "On Busy" diverting to the phone number entered
12345 This is the default security code
press and hold # Lets you switch between lines



Universal Codes for Nokia and other phones:-


Compatible Phones:- Alcatel,Bosch,Ericsson,Mitsubishi,Motorola,NEC,Nok ia,Philips,Samsung,Siemens,Son

y



IMEI Code:-*#06# (on most phones) This should return a 15 character number,
which is the same as the one on the back of the phone. It is made up as follows.
123456 78 901234 5 12 = Manufacturer 52 = Ericsson 44 = Motorola 49 = Nokia
3456 = Type Approval Code 0518-0523 = 6110 3002 = 6150 78 = Final Assembly Code
07 = Germany 10 = Finland (all Nokia phones) 40 = UK 67 = USA 80 = China 81 = China
901234 = Serial Number 5 = Spare


GSM Code:-Call Diverting

Immediate
To Activate: * * 21 * NUMBER # [SEND]
To Cancel: # # 21 # [SEND]
To Check: * # 21 # [SEND]

Time Delay
To Activate: * * 002 * NUMBER * * (Time 5 to 30 Seconds) # [SEND]
To Cancel: # # 002 # [SEND]
To Check: * # 002 # [SEND]

Conditional
To Activate: * * 004 * NUMBER * * (Time 5 to 30 Seconds) # [SEND]
To Cancel: # # 004 # [SEND]
To Check: * # 004 # [SEND]

No Answer
To Activate: * * 61 * NUMBER * * (Time 5 to 30 Seconds) # [SEND]
To Cancel: # # 61 # [SEND]
To Check: * # 61 # [SEND]

Unreachable
To Activate: * * 62 * NUMBER # [SEND]
To Cancel: # # 62 # [SEND]
To Check: * # 62 # [SEND]

Engaged
To Activate: * * 67 * NUMBER # [SEND]
To Cancel: # # 67 # [SEND]
To Check: * # 67 # [SEND]

To Cancel All Call Forwarding
# # 002 # [SEND]



Call Barring

Barring All Outgoing Calls
To Activate: * 33 * BARRING CODE# [SEND]
To Cancel: # 33 * BARRING CODE # [SEND]
To Check: * # 33 # [SEND]

Barring All Outgoing International Calls
To Activate: * 331 * BARRING CODE# [SEND]
To Cancel: # 331 * BARRING CODE # [SEND]
To Check: * # 331 # [SEND]

Barring All Outgoing Iinternational (except to home country) Calls
To Activate: * 332 * BARRING CODE# [SEND]
To Cancel: # 332 * BARRING CODE # [SEND]
To Check: * # 332 # [SEND]

Barring All Incoming Calls
To Activate: * 35 * BARRING CODE # [SEND]
To Cancel: # 35 * BARRING CODE # [SEND]
To Check: * # 35 # [SEND]

Barring All Incoming Calls Whilst Outside Home Country
To Activate: * 351 * BARRING CODE # [SEND]
To Cancel: # 351 * BARRING CODE # [SEND]
To Check: * # 351 # [SEND]

Barring All Calls
To Activate: * 330 * BARRING CODE # [SEND]
To Cancel: # 330 * BARRING CODE # [SEND]
To Check: * # 330 # [SEND]

Barring All Outgoing Calls
To Activate: * 333 * BARRING CODE # [SEND]
To Cancel: # 333 * BARRING CODE # [SEND]
To Check: * # 333 # [SEND]

Barring All Incoming Calls
To Activate: * 353 * BARRING CODE # [SEND]
To Cancel: # 353 * BARRING CODE # [SEND]
To Check: * # 353 # [SEND]

Cancelling All Call Barring
# 330 * BARRING CODE # [SEND]





This banner was supplied by SAFE Audit


Call Wait/Hold


To Activate: * 43 # [SEND]
To Deactivate: # 43 # [SEND]
To Check: * # 43 # [SEND]

To end the call on hold or set UDUB (User Determined User Busy) for a waiting call press: 0 [SEND]
To end the current call press and accept the call on hold or waiting: 1 [SEND]
To release a specific call (where this call is X) press: 1X [SEND]
To place active call on hold and accept the other held or waiting call press: 2 [SEND]
To activate a specific call (where this call is X) and place all other's on hold press: 2X [SEND]
To add the held call to the current conversation press: 3 [SEND]
To make a new call and place current call's on hold enter: Number [SEND]
To end all call's together (except a waiting call) press: [END]



Call Line Identity (CLI)

Outgoing
To Activate: * 31 # [SEND]
To Deactivate: # 31 # [SEND]
To Check: * # 31 # [SEND]

Incoming
To Activate: * 30 # [SEND]
To Deactivate: # 30 # [SEND]
To Check: * # 30 # [SEND]



Diverting Data Calls

No Reply
To Activate: * * 61 * NUMBER * 25 # [SEND]
To Cancel: # # 61 * 25 # [SEND]
To Check Status: * # 61 # * 25 # [SEND]

Time Delay
To Activate: * * 61 * NUMBER * 25 * (Time 5 to 30 seconds) # [SEND]
To Cancel: # # 61 # * 25 # [SEND]
To Check Status: * # 61 # * 25 # [SEND]

Unreachable
To Activate: * * 62 * NUMBER * 25 # [SEND]
To Cancel: # # 62 # * 25 # [SEND]
To Check Status: * # 62 # * 25 # [SEND]

Busy
To Activate: * * 67 * NUMBER * 25 # [SEND]
To Cancel: # # 67 # * 25 # [SEND]
To Check Status: * # 67 # * 24 # [SEND]

Unconditional
To Activate: * * 21 * NUMBER * 25 # [SEND]
To Cancel: # # 21 # * 25 [SEND]
To Check Status: * # 21 # * 25 # [SEND]



Diverting Fax Calls

No Reply
To Activate: * * 61 * NUMBER * 13 # [SEND]
To Cancel: # # 61 * 13 # [SEND]
To Check Status: * # 61 # * 13 # [SEND]

Time Delay
To Activate: * * 61 * NUMBER * 13 * (5 to 30 seconds) # [SEND]
To Cancel: # # 61 # * 13 # [SEND]
To Check Status: * # 61 # * 13 # [SEND]

Unreachable
To Activate: * * 62 * NUMBER * 13 # [SEND]
To Cancel: # # 62 # * 13 # [SEND]
To Check Status: * # 62 # * 13 # [SEND]

Busy
To Activate: * * 67 * NUMBER * 13 # [SEND]
To Cancel: # # 67 # * 13 # [SEND]
To Check Status: * # 67 # * 13 #[SEND]

Unconditional
To Activate: * * 21 * NUMBER * 13 #[SEND]
To Cancel: # # 21 # * 13 # [SEND]
To Check Status: * # 21 # * 13 # [SEND]

 

[Billl Gates]

Alcatel Secret Codes :-

To view IMEI (International Mobile Equipment Identity) number enter *#06#

To Enter Service Menu enter: *#000000#

To view Secret Menu type 000000 then press *

Secret Menu Appears
TRACES channel indicator menus
ARRETS - ?
VIDER ARRETS Press OK and the phone responds: This
action is executed!
CTRL CHARGE It show the charger voltage and battery
voltage.
DAMIER display test

The Service provider (SP) lock is used to lock the cell
phone to the SP's SIM card. Once the cell phone is
locked to a specific operator, if one inserts a SIM card
from a different operator the phone will refuse to
accept it! The cell phone will however accept another
SIM card from the same operator.

Removing SP lock on Alcatel Easy
This is how to remove the SP lock on Alcatel (one touch)
Easy. (You wil need a cable, a eeprom device and some sw)

Edit the eeprom:

Address Replace with
------------- ---------------
176h FFh
177h FFh


Bosch Secret Codes :-


*#3262255*8378# (*#DANCALL*TEST#) to make secret
Engineering menu (menu 10) appear.

10. Engineering
10.1 MS Info
10.1.1 on
10.1.2 off
10.2 Software details
10.2.1 Software version
10.2.2 EEPROM version
10.2 Test / Production details
10.3.1 Hardware data
10.3.2 Production data
10.3.3 Service data
10.3.4 Mechanical data

*#06# to display the IMEI (International Mobile Equipment Identity)
*#0000# to set the language automaticaly (Reset to english)
*#3370# to set the Enhaced Full Rate
#3370# to Reset the phone
*#9000# to enter sim lock code
*#9001# To enter the corporate code (Bosch 908)
*#9002# To enter the provider code (Bosch 908)
*#9003# to enter the network code
*#9004# to enter the subset code
*#9100# to remove the sim lock permanently
*#9101# to remove the corporate lock permanently
*#9102# to remove the provider lock permanently
*#9103# to remove the network lock permanently
*#9104# to remove the subset lock permanently

(SIM-lock is NOT the SP-lock/Service Provider lock!!)

The SIM-lock makes your phone to fusion with the
SIM-card, and the phone will not accept any other SIM
cards after you lock your phone! You get ten chances to
type the correct code! After the tenth time your phone
gets "SIM-lock permanently blocked", and you will be
unable to open it !! The best thing you can do is to
remove the SIM-lock permanently!!

Mitsubishi Secret Codes :-

Monitor mode: Hold C and press 379
Secret menu: Hold C and press 987
Version number: Hold C and press 597
Phase1 and 2 : Hold C and press 499
Warm start : Hold C and press 179
Instant turn off: Hold C and press 999
Unlock menu: Hold C and press 787090


Nokia codes

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.
*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.
*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.
*#4720# - Half Rate Codec activation. It will automatically restart
*#4720* - Half Rate Codec deactivation. It will automatically restart
*#746025625# - Sim clock allowed status.

Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced with about 5%

Half Rate will give you bad soundquality, which gives the serviceprovider the opportunity to have more calls on the network, and you might get a lower charge from them. - Will give you 30% longer talk-time.

Sim Clock Stop : *#746025625# apparently only works for 3 minuts.


*#92702689# - takes you to a secret menu with 6 choices
1) shows the serial nr.
2) shows when the cel phone was made mmyy
3) shows when the the cel. phone was purchased mmyy
4) shows how many times the cel. phone has been repaired.
5) makes u capebel of transferring user data if u have the gear for it
6) shows how many houres the phone has been on



Model Specific Codes for Nokia:-

Nokia 3210/5110/6110

To view IMEI number *#06#
To view Software Version enter *#0000#
To view Status of Sim Clock Stop. Enter *#746025625#
Latest Version is under Phone Info
Type is NSE-3NX
*#92702689# offers you Serial Number and also IMEI number. There are various options to scroll here.
The code is easier to remember as *#war0anty# (warranty)
The next screen is the date of manufacture in the format Made: 1197
The next screen is the purchase date in the format Purchasing Date: 1197 (this can be edited)
The next screen has Repaired: 0000 (presumable at repair the date is entered)
The next screen has Transfer User Data? (the same option as the 8110)
To exit turn the phone off and then back on.
*3370# to activate Enhanced Full Rate (*efr0#)
#3370# to deactivate Enhanced Full Rate (#efr0#)
*4720# to activate Half Rate (*hra0#) ONLY IN SOFTWARE VERSION V4.33 OR EARLIER
#4720# to deactivate Half Rate (#hra0#)
After pressing these codes the phone will shut down and start up again with the service activated/deactivated.
Unlock SP lock
Here is a way to Unlock your phone which is Service Provider locked, without to know SPLock code !!!!
Give it a try:
First of all, PIN CODE MUST BE ON, then press:
C

C and hold until it clears display
* and hold until start to blink
* and hold until start to blink
04* * *your pin#
Each time you turn your phone OFF it resets the lock, so this need to be done each time you'll turn your phone ON Sad
Anyway it's better than nothing, isn't it?
6110 Sim Card Locking
There are four different types of Sim Locks on the 6110 (not sure about 5110 yet).
1 = Country Lock - Lock to Specific Country
2 = Network Lock - Lock to Network
3 = Provider Lock - Lock to Service Provider
4 = Sim Lock - Lock to Specific SIM Card
To see the status of your phone
#Site-O-Crap+(mastercode)+X#
(mastercode) is a 10 digit number WITHOUT the brackets.
X is a number 1 through 4, it shows the above locks. Not sure of which numbers are assigned to which lock yet. (The numbers above stand for X => for esample: 1 = Country Lock
Sim not restricted message means your phone is NOT sim locked - Check all 4 to be sure.
Most SIMs are locked with the Service Provider Lock => f.e. to the network of MAX



Nokia 1610

To view IMEI number *#06#
To view Software Version enter *#170602112302#
Latest Version is under Phone Info


Nokia 2010

To view IMEI number *#06#
To view Software Version enter *#9999#
Nokia 2110

To view IMEI number *#06#
To view Software Version enter *#9999#
Latest Version is under Phone Info
Type is NHE-1XN
Unlock SP lock
Here is a way to Unlock your phone which is Service Provider locked, without to know SPLock code !!!!
Give it a try
Turn the phone on, when the phone asks for the Security Code,
press:
112
now quickly press:
#
send
end
send
end.
Each time you turn your phone OFF it resets the lock, so this need to be done each time you'll turn your phone ON Sad
Anyway it's better than nothing, isn't it?
Nokia 2110e/2110i

To view IMEI number *#06#
To view Software Version enter *#170602112302#
If you have latest software version you have to enter *#682371158412125#
Latest Version is under Phone Info
To view Week and Year of manufacture enter *#3283#
On phones prior to 01/01/96 1295 means December 95, On phones after 01/01/96 2196 means 21st week of 1996.
To enter small letters hold down the key for a few seconds and it will turn caps off


Nokia 3110

To view IMEI number *#06#
To view Software Version enter *#3110#
*#92702689# - phone asks warranty code:
There are a number of choices here
6232 (OK) : Displays the Month and Year of Manufacture
7332 (OK) : Displays the date of the last repair
7832 (OK) : Displays the date where the phone was purchased
9268 (OK) : Display Serial Number
37832 (OK) : Set the Purchasing Date MMYY
87267 (OK) : Confirm Transfer, Related to firmware upgrade.
*#746025625# - phone says 'SIM CLOCK STOP ALLOWED' or "SIM CLOCK STOP NOT ALLOWED" depending on your SIM Card.
*#7780# restores phone's factory settings.
Nokia 8110/8110i

To view IMEI number *#06#
To view Software Version enter *#8110#
Latest Version is under Phone Info.
*#92702689# - phone asks 'warranty code:'
There are a number of choices here
6232 (OK) : Displays the Month and Year of Manufacture
7332 (OK) : Displays the date of the last repair
7832 (OK) : Displays the date where the phone was purchased
9268 (OK) : Display Serial Number
37832 (OK) : Set the Purchasing Date MMYY
87267 (OK) : Confirm Transfer, Related to firmware upgrade.
*#746025625# - phone says 'SIM CLOCK STOP ALLOWED' or "SIM CLOCK STOP NOT ALLOWED" depending on your SIM Card.
Type of Phone is NHE-6


Nokia 8810

To view IMEI number *#06#

Nokia 9000/9000i

To view IMEI number *#06#
To view Software Version enter *#682371158412125#
Latest Version is under Phone Info
To view Week and Year of manufacture enter *#3283#



Philips Secret Codes :-

Blocking list *#3333*#
Time connected *#2558*#
Flags,something *#3377*#
Security code *#7489*#

Service Provider Lock

The Service provider (SP) lock is used to lock the cell
phone to the SP's SIM card. Once the cell phone is
locked to a specific operator, if one inserts a SIM card
from a different operator the phone will refuse to
accept it! The cell phone will however accept another
SIM card from the same operator.


IMEI code *#06#
SW info *#8377*#
Security code *#1234*#
*#2254*# Status register: C, BS, RR, MMI, CREAT.
*#2255*# activate and deactivate the "DEBUG CALL"-Mode; when activated, make a call to a busy line an the phone will disp some hex-codes on the disp.
*#2558*# the time in days,hours and minutes you are connected to the net
*#2562*# not clear; the phone reconnects to the net
*#2565*# not clear; warmstart ?
*#3333*# (NO) BLOCKING - list (15 items)
*#2377*# "BEER": not clear, the phone waits a random time and reconnects to the net, sometimes the phone makes a reset or something
*#3377*# Init, Flags, SIM LCK
*#3353*# resets the (NO) BLOCKING - list
*#7378*# Name, Length, SIM phase
*#7489*# SECURITY CODE
*#7693*# you can activate and deactivate the SLEEP MODE (when deactivated the battery will go down!)
*#7787*# not clear: SPURIOUS INTERRUPT
*#7948*# SWITCH OFF: not clear; it is a timer or something
*#8463*# Some information about the SLEEP MODE: Wake, Sleep Req., Sleep

Philips Genie (TCD838)
Type *#2337*# and it will be activate the beep signal when the cellphone reconnected to the net.


Sony Secret Codes :-


he Service provider (SP) lock is used to lock the cell
phone to the SP's SIM card. Once the cell phone is
locked to a specific operator, if one inserts a SIM card
from a different operator the phone will refuse to
accept it! The cell phone will however accept another
SIM card from the same operator.

Remove SP lock (For advanced users only)
Just edit your eeprom and at the address 16b-1D8 fill
this address with 00.
Show Software date Following procedure will show on your
phone the software date. Remove your SIM Card, then
press:

* # 06 #

and finally press:

[left softkey]

To enter Monitor Mode on Network Option menu
1. Menu 9 (Phone Options)
2. 7 (Phone Status)
3. [Left Display Button] (left MENU key)
4. 7684666
5. [HangUp Button] (Red HandSet key)

Show Software version and manufact. date Following
procedure will show on your phone the software version
in first row of the display and some CPU and OS info on
the second and third one. # 8377466 # (#version#)

On earlier version the above tip may not work, but you

can try this one:

In the menu go to PHONE SETTINGS
Jog down to: FACTORY SETTINGS and CLICK ONCE
You will see a display "Factory Setting Yes No" . Don’t
do anything with this display, leave it as it is.
Move the main switch of the phone briefly to the right
(briefly means long enough to secure a short electric
contact BUT short enough not to switch off the phone!)
Now you key in the following sequence:
# * 0 4 Will display info about sw (?)

 

[Billl Gates]

CDMA

*3001#12345#

Dont mess with the settings though .. Btw .. you can change the Alpha Tag to your name here

*#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again



Quote:
Nokia code Code function
*3370# This Nokia code activates Enhanced Full Rate Codec (EFR) - Your Nokia cell phone uses the best sound quality but talk time is reduced my approx. 5%
#3370# Deactivate Enhanced Full Rate Codec (EFR)
*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time
*#4720# With this Nokia code you can deactivate the Half Rate Codec
*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type
*#9999# Phones software version if *#0000# does not work
*#06# For checking the International Mobile Equipment Identity (IMEI Number)
*#147# This lets you know who called you last (Only vodofone)
*#1471# Last call (Only vodofone)
*#21# This phone code allows you to check the number that "All Calls" are diverted to
*#2640# Displays phone security code in use
*#30# Lets you see the private number
*#43# Allows you to check the "Call Waiting" status of your cell phone.
*#61# Allows you to check the number that "On No Reply" calls are diverted to
*#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to
*#67# Allows you to check the number that "On Busy Calls" are diverted to
*#67705646# Phone code that removes operator logo on 3310 & 3330
*#73# Reset phone timers and game scores
*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible
*#7760# Manufactures code
*#7780# Restore factory settings
*#8110# Software version for the nokia 8110
*#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again
*#94870345123456789# Deactivate the PWM-Mem
**21*number# Turn on "All Calls" diverting to the phone number entered
**61*number# Turn on "No Reply" diverting to the phone number entered
**67*number# Turn on "On Busy" diverting to the phone number entered
12345 This is the default security code press and hold # Lets you switch between lines


Veiw IMEI #
(International Mobile Equipment Identity)
*#06
Half Rate Codec
Half Rate Codec will decrease sound quality but it gives you about 30% lower battery
consumption. You may enable it by this code:
* 4720 #
or disable it:
# 4720 #
Enhanced Full Rate Codec (EFR)
For activation enter *#3370#
For deactivation enter *#3370*


*#0000# for checking the phones software (SW) - called firmware revision information.
*#6110# Try this code if the above code doen't work.
*#6190# Try this code if the above code doen't work.

*#746025625# [*#sim0clock#] to check if the Sim-Clock can be Stopped
(Sim-clock-stop is a kind of standby mode which will save battery time)< I was told that this
code will let you send free sms but it only lasts for 3 minutes- NOT TESTED.

*#92702689# [*#war0anty#] Warranty code.
You don't need the warranty-codes any more - you can
just scroll through the information like in any other menu. It has the the
same data as 81xx and 31xx phones (with "Edit" button for purchase date, and "User data transfer").

Menu: 1: Displays Serial Number. 2: Displays the Month and Year of Manufacture (0997)
3: Displays (if there) the date where the phone was purchased (MMYY)
you can here set the Purchasing Date (Warning: You can only do this once -
so be careful what you write...)
4: Displays the date of the last repairment - if found (0000)
6: Transfers ALL phone numbers, pictures, sounds from one phone to another
(eg. if broken) 6110 can also transfer all data via IRport (Confirm Transfer?)

SP LOCKS.
The Service provider (SP) lock is used to lock the cell phone to the
SP's SIM card. Once the cell phone is locked to a specific operator, if one
inserts a SIM card from a different operator the phone will refuse to accept it!
The cell phone will however accept another SIM card from the same operator.
All Nokia phones (2110 and newer) have four different SIM locks which can be used to lock the phone for upto 4 different providers. But most phones with restriction only have one lock activated. ( lock 1)
The main code used in Nokia phones is:
#pw+(master code)+Y#
This code is able to check, activate or remove Sim card restriction (SP-lock).
Use the * key to get the p, + and w chars.
'Y' has to be 1,2,3 or 4 - depending of what lock you what to deal with.
#pw+1234567890+1# for Provider-Lock status (MCC+MNC)
#pw+1234567890+2# for Network-Lock status (GID 1)
#pw+1234567890+3# for Provider-Lock status (GID 2)
#pw+1234567890+4# for SimCard-Lock status (MSIN)
(master code is a 10 digit code, based on the phones IMEI number)
Eg. To remove restriction on lock 1 type following code:
#pw+(master code)+1#
If you just want to check your phone use 10 random numbers Eg. 1234567890
as the (master code)
EXSAMPLE:
To check if phone if restricted on lock 1 type the following code: #pw+1234567890+1#
NOTE that this function must be used with care since it's only possible to type in 3
different codes on each lock! if one types in more than 3 times then phone needs extra care.

ADVANCED CODES!

Bypass the SP lock (Nokia Models)
With some versions of Nokia 16xx/21xx/31xx/51xx/81xx that are SIMlocked you can bypass the
SP lock like this:
1] Insert sim card of diferent provider.
2] Turn on the phone and press the UP VOLUME key for 3 sec. then release it and the phone
says PIN CODE ?
3] Press the "C" key.
4] Then Press * and wait until it desapear and apear again, then press * one more time and
04*PIN*PIN*PIN#
The phone now says: PIN CODE CHANGED (or ACCEPTED)
and the SIM card is accepted until you restart the phone again.
NOTE: On vesion 5.04 (5110) Nokia has removed this option !

Crazy 5110
Send a SMS full of . (dots) the it'll go crazy when you scroll the received message in your 5110. It doesn't do any permanent damage...it only goes crazy if you scroll the SMS. I'm not sure if it works with all of the software version but it works with 4.59. Doesn't work on SW version 4.53 ..

Your number in your display
1. Goto menu 3-7 Call cost settings.
2. Turn ON the Call costs' limit 3-7-1. PIN2 code Required.
3. Put in the limit with the phone number. eg. if your phone # is 054 123456 Enter the limit as 123456
4. Goto menu 3-7-2 Show costs in. PIN2 code Required.
5. Select Currency.
6. Enter Unit price : 1
7. Enter Currency name as 054 (per my phone # eg. above) Now the phone number 054 123456
will remains on the 4th row of the display. Secondly, if you press the # key, it prompt which line to be used; Line 1 or 2.

Larger Number Tip (works in 51xx series)
If you hold the key # while you are in the names list, the telephone number can be viewed larger.

Veiwing the speed dial place.
Type 1#, 2#, 3#, 4#,... on the keypad (when you're not in the menu) to get the phone number
used for with this key when speed dialing.

Numbers in SMS
Hold the # key press * three times, the abc or ABC on the upper left of the display
switches to 123 and you can write numbers directly. To come back to abc repeat the procedure.

Please note that if you do these next tricks, the new menus can't be erased without
restoring the factory default settings
To activate the "Car" menu, you need to short-circuit pins "4" and "5". After a short time the word "Car" will be shown in the display. Menu 3-7 is now enabled.

To activate the "Headset" menu, you need to short-circuit pins "3" and "4". After a
short time the word "Headset" will be shown in the display. Menu 3-6 is now enabled.

Charge your phone forever.
If your phone is off and you charge it, unplug the cord while pressing the power button to turn it on, and it'll keep charging for ever...

NetMonitor information

GSM phones from Nokia have a special menu called Netmonitor (Operator Field Test Display) which gives access to more than 50 submenus (depending on model). Signalling displays,information on serving cell and neighbours, Network parameters, Ciphering, hopping, DTX status and IMSI, Lights status control and batt. temperatur is just some a the functions found here.

There are three different modes:
- display mode
- execute mode
- help mode

 

[Billl Gates]

Display mode is used etc. typing in 1 and just scrolling the menus. Help mode will be activated by holding down * for 2 sec. If you what to switch timers, lights etc. you need to use execute mode. Execute mode is of the one-shot type. You switch on / off and in some menus resets through the main menu: "Test:". Just type in the menu number you like to switch. Go back and retype to switch back. (only for on / off functions)

Netmonitor on Nokia can NOT be activated by any *# code alone.
However these 3 ways work:

1. With a special SIM card.
2. By de-soldering the eeprom with ATMEL AT 24C64 (serial 8kbyte eeprom). Read out data with eprommer (e.g.. GALEP 3 avail. at CONRAD Electronic, or ECLIPSE from Stag) and save data! Eg. Nokia 6150 at address 0430 (software-version 4.01) change hex 00 to ff 3. With a cable (M2BUS or FBUS) and the right software. [Software can be found on GSMinside.com's software page and the cable can be found in the cable section]

Note that may need to take out the batt after activation of the Netmonitor to make the menu appear.

IMEI Information
XXXXXX XX XXXXXX X
TAC FAC SNR SP
TAC = Type Approval Code (first 2 digits = country code of the approval-country )

FAC = Final Assembly Code (01,02 = AEG)
(10,20 Nokia)

SNR = Serial Nr.
SP = Spare (always "0")[/b]

 

[Billl Gates]

Quote:
With Nokia codes or Nokia secret codes you can access hidden features and gain information about your Nokia phone. Many of the Nokia codes are only normally used by Nokia engineers. Nokiainfo.net takes no responsibility for any data loss resulting in using these Nokia codes.

Nokia code Code function
*3370# This Nokia code activates Enhanced Full Rate Codec (EFR) - Your Nokia cell phone uses the best sound quality but talk time is reduced my approx. 5%
#3370# Deactivate Enhanced Full Rate Codec (EFR)
*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time
*#4720# With this Nokia code you can deactivate the Half Rate Codec
*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type
*#9999# Phones software version if *#0000# does not work
*#06# For checking the International Mobile Equipment Identity (IMEI Number)
#pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
#pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
#pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
#pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
*#147# This lets you know who called you last (Only vodofone)
*#1471# Last call (Only vodofone)
*#21# This phone code allows you to check the number that "All Calls" are diverted to
*#2640# Displays phone security code in use
*#30# Lets you see the private number
*#43# Allows you to check the "Call Waiting" status of your cell phone.
*#61# Allows you to check the number that "On No Reply" calls are diverted to
*#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to
*#67# Allows you to check the number that "On Busy Calls" are diverted to
*#67705646# Phone code that removes operator logo on 3310 & 3330
*#73# Reset phone timers and game scores
*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible
*#7760# Manufactures code
*#7780# Restore factory settings
*#8110# Software version for the nokia 8110
*#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again
*#94870345123456789# Deactivate the PWM-Mem
**21*number# Turn on "All Calls" diverting to the phone number entered
**61*number# Turn on "No Reply" diverting to the phone number entered
**67*number# Turn on "On Busy" diverting to the phone number entered
12345 This is the default security code press and hold # Lets you switch between lines

*#7370# reformat only nokia series 60



Lock code
Length: 5 digits
Detail: Prevents access to certain functions on the phone
Set from: Tools > Settings > Security > Phone & SIM
Default: The default lock code for Nokia Series 60 devices is 12345.
Lost? - If you've changed this code and forgotten it - you will need to visit a Nokia authorised service center, who will be able to reset the lock code for you.[/b]

 

[Billl Gates]

Quote:
PSTN
-Network feature codes
-Carrier Test Numbers
-ANI numbers
-Carrier overide codes
-Other Interesting Numbers
Trunked Radio System Information
MOBILE SECTION - INTERNATIONAL (Outdated)
-Menu Codes
-How To send Free SMS and SMSc
-IMEI tracking


Common Test numbers
These are some common numbers that all carriers should respond to,
I have tried the last two and they work fine. but when i dialed the first number i got an engaged signal.
+++++++++++++
ALL CARRIERS+
+++++++++++++
018 01 8222 Own number RVA
12711 Long distance carrier pre-selection confirmation
1800 80 1921 Own number RVA


These are some common numbers that all carriers should respond to,
I have tried the last two and they work fine. but when i dialed the first number i got an engaged signal.


ANI-(A)utomatic (N)umber (I)dentification.

basically when you dial an ANI number the
number of the phone you are using is read back to you.
this is how payphone numbers were gathered in the olden days.
(how pathetically ignorant of me - deci 04Wink


ANI inc. mobiles: 018 018 222
Telstra ANI: 127 22 123
Telstra ANI: 1800 801 920
Optus ANI: 127 23 12
iPrimus DCX: 1800 855 747



CND blocking prefix
Used to block outgoing CND info for a single call on a line that is preset to automatically send CND information. so basically its good for hiding your phone number from mobiles and other new Calling Number Display LCD phones and service numbers such as *10#.


CND blocking prefix: 1831(+ phone number)


CND sending prefix
Used to send outgoing CND info for a single call on a line that is preset not to automatically send CND information.layman term to make it so people can see your number. Some people may remember using the 1832
prefix to obtain CT4 (Goldphone) numbers.


CND sending prefix: 1832(+phone number)


For Optus CND blocking prefix
see the Optus Network Codes further down the page.

Carrier Pre-selection Over-ride Codes

Use a prefix code before the STD/IDD (phone)number you want to call to select a carrier (other than your pre-selected carrier) for that call.

--------------------------------------------------
PREFIX | Allocated To
--------------------------------------------------
1410 Alterna Telecom Pty Limited
1411 Telstra Corporation Ltd
1412 iiTel Pty Ltd
1414 AAPT Ltd
1415 Vodafone Network Pty Ltd
1419 AAPT Ltd
1422 Worldlink Telecommunications Pty Ltd
1423 Edge Internet Services Australia Pty Ltd
1424 AAPT Ltd
1425 Hutchison Telecommunications (Australia) Pty Ltd
1428 MCI WorldCom Australia Pty Ltd
1433 The Internet Group Limited
1434 Pacific Gateway Exchange (Australia) Pty Ltd
1440 The Ozitel Network Pty Ltd
1441 RSL COM Australia Pty Ltd
1450 Prodigy Communications Australia Pty Ltd
1455 Primus Telecommunications Pty Ltd
1456 Cable & Wireless Optus Ltd
1464 Davnet Limited
1465 AAPT Ltd
1466 Primus Telecommunications Pty Ltd
1468 New Tel Networks Pty Ltd
1469 AAPT Wireless Pty Ltd
1470 KDD Australia Pty Ltd
1474 Powertel Ltd (Spectrum)
1477 Global One Communications Pty Ltd
1478 One.Tel Pty Ltd (no longer operating)
1479 One.Tel Pty Ltd (no longer operating)
1483 Finkelp Pty Ltd
1486 Flow Communications Pty Ltd
1488 Digiplus Pty Ltd
1499 WorldxChange Pty Ltd
-----------------------------------------------------



Telstra Test Numbers
All test numbers for Telstra begin with 12722.
so phreakers get to your nearest payphone and start scanning.
here is the list so far.


12722 0 CND send status

12722 123 Own number RVA (old number 19 123)

12722 199 Ringback (old number 199)

12722 40001 "The number you have called is not available from this service"

12722 40003 "This service is not connected"

12722 40004 "Your attempt to use this feature has been unsuccessful"

12722 40005 "The feature you have tried to to use is not provided"

12722 40006 "The number you have called is not connected"

12722 40007 Recorded busy tone

12722 40008 "Congratulations. You have accessed a standard network test message recording"

12722 40009 "The person you are dialling now has a new telephone number. To find out the new number please call Telstra's changed number information service"

12722 40010 "The number you are calling is currently unavailable"

12722 40020 "The number you have called is not compatible with your equipment"

12722 40023 "The service type you have requested is not provided"

12722 40024 "You have attempted to call via a service provider network.
All lines are currently busy. Please delay your call for a short time"

12722 40033 "This number is not in service. Please use the alternate number for the person you are trying to contact"

12722 40034 "This telephone number cannot be dialled with an area code. Please try again without using the area code"

12722 40035 "Thank you for using Telstra for your long distance calls"

12722 40036 Congestion tone

12722 40037 Congestion tone

12722 40064 "Operator assisted calls are not permitted to this number"

12722 42209 "Your Telstra call waiting feature is on"

12722 42210 "Your Telstra call waiting feature is off"

12722 42211 tone... "Your Telstra call waiting feature is on"

12722 42212 tone... "Your Telstra call waiting feature is off"


ah the old call back..
12722 199
*note that number will only ring..so not like the old 199 number where you would hang up and then the phone would ring.

Optus Test Numbers
Test numbers for Optus all begin with 12723, so phreakers once again start scanning.


12723 12 Own Number RVA (old number 127 2311)
12723 22 1kHz
12723 99 Ringback



Optus Network Codes

Legend
FAT = Feature Access Tone
RVA = Recorded Voice Announcement

 

[Billl Gates]

CND Blocking Prefix *31 (FAT) phone number
CND Sending Prefix *32 (FAT) phone number
Selective Call Reject *60

Selective Call Divert *63

Selective Call Accept *68

Call Return *69

Call Divert *78 (FAT) phone number
#78 (FAT)

Call Waiting #87

VoiceMail Access *96

Speed Dial *99 abbrev code number #



Telstra Network Feature Codes

Legend
FAT = Feature Access Tone
RVA = Recorded Voice Announcement
AXE = Ericsson Exchange



Last Number Redial (AXE Only) 0#

Call Return *10#

Multiple Number -
Second Line Number *11*2#
*11*2#

(2nd dial tone) *21+phone number#

Call Waiting over-ride per call (AXE Only) - *44+phone number

Call Waiting - *43# (FAT)

Auto Call Back - Recall *37# (RVA)

Delayed Hotline - *53+hot line number+#

Smart (Selective) Ring - *88# (RVA)

Call Forwarding on No Answer - *62#

CND blocking per call - *31#+phone number


The last one would have to be a favourite or at least very useful
in particular situations. The CND blocking per call Number (*31#+phone number) is used for blocking calls from a particualr
number...say the number of your fanatically obessed ex-girlfriend
or maybe the number of a cuban cocaine dealer that you happen to owe money too.
For people who dont understand how to use it,
what you do is:
-Pick Up The Phones reciever or handset.
-Dial *31# then enter the phone number of the person who you dont want calling and yay....no more hassels.
(unless they ring from a different number or a payphone , then your
screwed.)
-Hang up the phone =P
Please note you have to pay extra for this service.

Interesting Numbers

FAST
FAST is a testing number for telstra field technicians.
its number is 1800 050 051.
to use FAST you will need a telstra employees PIN and ID number.
there were a few ways of bypassing the employee and pin bit using ***
(three asterixes, the asterixes still acts as wildcards in the phone world too.) To a phreak in australasia gaining access to FAST is better than gold.

-----------------------------------------------------
TRUNKED RADIO SYSTEMS
-----------------------------------------------------
BISCOM - This is a commercial MPT1327 network operating in the State of Victoria.
It is owned by a company called Radio Technolgies.
It uses frequencies between 165.2 and 168.0625 MHz.
Tasmania is setting up a state wide EDACS protocol trunked radio network,
operating with base output frequencies 865.000 to 870.000 MHz, 12.5 KHz steps,
and up to 5 channels per base station, each 1 MHz apart as per Australian convention
(ie 865.4875, 866.4875, 867.4875 etc). With 50 planned base stations for this island state,
the objective is to provide 90% indoor handheld coverage for the whole island! Planned users are:
Hydro Electric commission, Tasmania Police, with other users able to join, but no mention of anyone
else taking the system up as yet. AEGIS will be implimented for the Police

Telstra Fleetscom - MPT1327 - This is a Australian nationwide
commercial trunked network which operates on
frequencies between 415.575 and 418.075 MHz.

Victorian Public Transport Corporation - An MPT1327 network used by the Trams and Trains
in the State of Victoria. It is uses
frequencies between 415 and 417 MHz.

Victoria State Government - MPT1327 - Frequencies between 163.825 MHz and 165.1875 MHz.
Used by State Electricity Commission,
Department Conservation & Natural Resources,
Environment Protection Authority,
Courier Companies,
Ambulance Transport Companies,
Victorian Road Transport Authority (Vicroads Grand Prix Corporation For 1997 Aust. F1 Grand Prix) ,
and Telstra Breakthrough Communications.
Operated on a commercial basis by Telstra Corporation.

Victoria Communications - MPT1327 - This is commercial network in the State of Victoria.
It uses frequencies between 415.575 and 418.075 MHz.


MOBILE
How to send free SMS and SMSc


The following is a list of most the SMSC's (Short Message Service Centers) around the world. These can be used to send text messages for free.

All you need to do is change the service center number on your phone (under "message settings") to one of the networks below. Don't choose your own network as you will get charged for it.

There are just a few things to remember when trying this:

If you use a network outside of your country, you will need international call roaming enabled (speak to your service provider about this).

The network you are using may not be able to send to the network you are trying to send to. Therefore it may accept the message but can't send it.

If you use a network outside your own country you will need type the recipients phone number in international format for your country because it's being sent abroad.

For example we are in the UK and to send someone we know a message for free using a forein service center we would type in the ANDORRA message center into our phone and send it to +447788123456.

The networks are becoming wise to this and are barring you from using their SMSC if your not on their network. Therefore it could become time consuming to find one that works.

Remember though, when you find one that works, keep it to yourself because the less people know about it, the better.

 

[Billl Gates]

Number List


Australia
One.Tel Australia +61 411 990 001
Vodafone Australia +61-415011501
Telstra Australia +61-418706700
Telstra Australia +61-418706800
Telstra Australia +61-418706900
Optus Australia +61-412025989
Optus Australia +61-411990000
Optus Australia +61-411990001
Optus Australia +61-411990003


Austria
A1 +43 664 0501
Connect ONE +43 699 0001999
max-mobil +43 676 021
tele.ring +43 650 09000000.


Azerbaijan
Azercell +994-50-910-3300
Bakcell +994557070707


Baharain
+973-9600179
Batelco +97392
Batelco +97394
Batelco +97396
Batelco+973973
Batelco +97398

Bangladesh
GrameenPhone +88017099999
GrameenPhone +88017500569
AKTEL ???


Belgium
Mobistar Belgium +32-95955205
Mobistar Belgium +32495002530
Proximus Belgium +32 475 161616
Orange Belgium +32-486000005


Bosnia and Herzegovina
PTT GSM BIH +387-66-125522


Botswana
Mascom Wireless +267-71010024
Vista Cellular +267 72000003.

Brunei Darussalam
+673879500

Bulgaria
MobilTel: +35988000301


Canada
Fido Canada +1-5149931123


Chile
Entel PCS +56-98890005

China
Telecom China +86-1390591500
Telecom China +86 13800100500


Croatia
Cronet +385-980501
VIPNET +385-910401


Cyprus
Cyprus +3579700000

Czech Republic
Eurotel Czech rep +420-602909909
Radiomobil Czech rep +420-603051

Denmark
Sonofon Denmark +45-40590000
TeleDanmark Denmark +45-40390999
Telia DK Denmark +45-28187000
Mobilix Denmark +45-26265151

Denmark
Free! +45 40590006

Egypt
Click GSM +20105996500
Mobinil +20122000020


Estonia
EMT Estonia +372-5099000
Ritabell Estonia +372-5509911
Radiolinja Estonia +372-568771010


Fiji
+679901400

Finland
Radiolinja Finland +358-508771010
Sonera Finland +358-405202000

France
SFR France +33-609001390
Bouygues France +33-660003000
Itineris France +33-689004000
Itineris France +33-689004431
Itineris France +33-68900458

Germany
D1 Germany +49-1710760000
D1 Germany +49-1715990000
D1 Talkline Germany +49-1710760900
D2 Germany +49-172227033
D2 Germany +49-1722270000 [to D2 only]
D2 Germany +49-1722270333
D2 Talkline Germany +49-1722270258
Debitel Germany +49-1722270222
IC3S Germany +49-1722270201
Dr Materna Germany +49-1722270111
E2 VIAG Germany +49-1760000443
E-Plus Germany +49-1770600000
E-Plus Germany +49-1770610000
E-Plus Germany +49-1770620000

Gibraltar
ANYONE HAVE THIS NUMBER?

Greece
Panafon Greece +30-94219000
Telestet Greece +30-93599000
Telestet Greece +30-93597000
Cosmote Greece +30-97100000


Holland
Libertel Netherlands +31-6540881000
PTT Netherlands +31-653131313
Telfort Netherlands +31-626000230
BEN Netherlands: +31-624000000
Dutchtone, Netherlands: +31628500561

Hong Kong
Hutchinson Hong Kong +852-94985795
HK Telecom Hong Kong +852-90288000
Smartone Hong Kong +852-90100000
Hong Kong +85292040032


Hungary
Pannon Hungary +36-209300099
Westel900 +36-30-9888-000
Vodafone +36709996500

Iceland
Landssimi Islands hf +354-8900100
Tal +354-6999099

Ireland
Eircell Ireland +35387699989
Esat Ireland +353-868002000

India [+91 - ]
AT&T Network of India
BPL Mobile India +91-9821000005
MAXtouch India +91-9820005446
Essar Cellphone +91-9811009998
Tata +919848001104
Command +919830099990
AirTel Delhi +91-98100-51914
Skycell Cellular +919840011003
Spice Karnataka +919844198441
Spicell +919831029222
Usha Martin Telekom ltd +919830099990

Indonesia
Satelindo Indonesia +62-81615
Satelindo : +62 816 124
Satelindo : +62 816 125
Satelindo : +62 816 126
Satelindo : +62 816 127
Satelindo : +62 816 128
Telkomsel Indonesia is +62-81100000
Exelcomindo Indonesia +62-818445009


Isle of Man
Pronto GSM +447624499955

Israel
Orange Israel +972-54-120032
Pele - ANYONE HAVE THIS NUMBER?

Italy
Omni Italy +39-3492000200
Omni Italy +39-3492000300
Omni Italy +39-3492000400
Omni Italy +39-3492000500
TIM Italy +39-3359609600
TIM Italy +39-3359608000
TIM Italy +39-338960960
TIM Italy +39-338980000
Wind Italy +39-3205858500

Kenya
Safaricom +25472500010
Kencell +254733000810


Kuwait
MTC +96596000303
Al-Wataniya +9656373717


Latvia
LMT Latvia +371-9202020
Baltcom GSM +371 9599994


Lebanon
FTML Cellis +61-3488888

Lesotho
Vodacom Lesotho [+266]

Lithuania
Bite GSM Lithuania +370-9950115
Omnitel Lithuania +370-9899992


Luxembourg
PTT Luxembourg +352-021100003
Tango Luxembourg +352-091000030

Sweden
Comviq Sweden +46-707990001
Comviq Sweden +46-707990002
Comviq Sweden +46-707990003
Comviq Sweden +46-707773078
Europolitan Sweden +46-708000708
Telia Sweden +46-705008999


Switzerland [+41-79]
Swisscom Switzerland +41-794999000
diAX Switzerland +41-765980000
Orange +41-787777070


Tanzania
Tritel +255812904000

Taiwan
Chung Wa Tele Taiwan +886-932400821


Thailand
AIS Thailand +66-18110888
WP1800 Thailand +66-16110400


Turkey
Turkcell Turkey +90-5329010000
Turkcell Turkey +90-5329020000
Turkcell Turkey +905329030000
Turkcell Turkey +90-5329040000
Telsim Turkey +90-5429800033


Ukraine
UMC +38050000501
Kyivstar +380672021111
Golden Telecom +380444990000
([email protected])
Wellcome +38044 251 7777


United Arab Emirates
PTT UAE +97150 6014994


United Kingdom
Isle of Man Pronto GSM +447624499955
Vodafone UK +44-7785016005
CellNet UK +44-7802000332
Virgin Mobile UK +447958879890
Orange UK +44-7973100973
Orange UK +44-7973100974 internal
One2One UK +44-7958879879
Guernsey Telecoms [+44-4481/7781]
Jersey +44-7781

USA
Aerial Comms USA +1-8132630025
Aerial Comms USA +1-2812350025
Voicestream USA +1-2063130004
Pacific Bell USA +1-2099042010
Pacific Bell USA +1-2099042020
Pacific Bell +1-2099042030.
Powertel USA +1-3343338200
DigiPH PCS USA +1-3342090307
Omnipoint USA +1-9179070004
Sprint USA +1-7044100000
Washington PCS USA +1-410258953

TRACKING STOLEN MOBILES USING THE IMEI
This piece of info is handy if you dont want your mobile to be stolen
and if you would like to track it down in case it ever gets stolen.
Type *#06# on your mobile and it will display a 15 digit International
mobile equpiment identifier (IMEI) number. write this IMEI number down.
When ever a new SIM card is inserted into the mobile the IMEI gets
stored on to the SIM. Hence its possible to track down the mobile number
given the IMEI.[/b]

 

[djboss]

nice

 

[Billl Gates]

welcome

 

[Grim Reaper]

woO0W

 

[Billl Gates]

welcome

 

[jerome11]

Chinese phone wala codes nedda?

 

[Billl Gates]

Chinese phone wala codes nedda?

chines phones eka wage dekak hoya ganna puluwanda?