Reply to thread

Message: <blockquote data-quote="Anusha" data-source="post: 243030" data-attributes="member: 828">Heatsink materialsThe thermal conductivity of the heatsink's material has a major impact on cooling performance. Thermal conductivity is measured in W/mK; higher values mean better conductivity.As a rule of thumb, materials with a high electrical conductivity also have a high thermal conductivity. See this Wikipedia article for more information on thermal conductivity.Alloys have lower thermal conductivity than pure metals, but may have better mechanical or chemical (corrosion) properties.The following materials are commonly used for heatsinks:    * Aluminum. It has a thermal conductivity of 205W/mK, which is good (as a comparison: steel has about 50W/mK). The production of aluminum heatsinks is inexpensive; they can be made using extrusion Due to its softness, aluminum can also be milled quickly; die-casting and even cold forging are also possible (see part 2 of this guide for more information about production methods). Aluminum is also very light (thus, an aluminum heatsink will put less stress on its mounting when the unit is moved around).    * Copper's thermal conductivity is about twice as high as aluminum - almost 400W/mK. This makes it an excellent material for heatsinks; but its disadvantages include high weight, high price, and less choice as far as production methods are concerned. Copper heatsinks can be milled, die-cast, or made of copper plates bonded together; extrusion is not possible.    * To combine the advantages of aluminum and copper, heatsinks can be made of aluminum and copper bonded together. Here, the area in contact with the heat source is made of copper, which helps lead the heat away to the outer parts of the heatsink. The first heatsink for PC CPUs with an embedded copper piece was the Alpha P7125 (for first-generation Slot A Athlon CPUs). Keep in mind that a copper embedding is only useful if it is tightly bonded to the aluminum part for good thermal transfer. This is not always the case, especially not with inexpensive coolers. If the thermal transfer between the copper and the aluminum is poor, the copper embedding may do more harm than good.<img src="http://www.heatsink-guide.com/alphap7125-bottom.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Alpha P7125 base plateThe copper plate helps spread heat across the base plate.<img src="http://www.heatsink-guide.com/hs_avc_round.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />AVC heatsink with copper coreThe copper core helps the heat move to the upper parts of the heatsink.<img src="http://www.heatsink-guide.com/thermalright_heatpipe_prototype.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Thermalright heatsink (prototype) with large heat pipe in the centerA heat pipe provides substantially better thermal transfer than a solid piece of copper.    * Silver has an even higher thermal conductivity than copper, but only by about 10%. This does not justify the much higher price for heatsink production - however, pulverized silver is a common ingredient in high-end thermal compounds.</blockquote>

Verification: Hath warak paha keeyada? (hatha wadikireema paha)

Top Bottom