Unlock your Treo 600 for free
Here are the instructions on how to fully unlock any Treo 600:
Unlocking is actually quite simple:
Part One:
1. Download and install Card Export. download Card Export shareware here .
2. Make sure you can see the Treo's SD card as a logical drive on the machine the Treo is connected to (if not connected try to sync your phone using Treo desktop manager).
3. Dowload the flash, patched.zip, here.
Skip part one if you can copy the downloaded files to your MMC card /PALM/LAUNCHER folder ***to make this folder automaticaly format the MMC card using Treo handset
Part Two:
1. Unzip all the files and copy them to the /PALM/LAUNCHER folder on your SD card.
2. Hard reset the Treo. (find the hard reset button near the battery and use your styles to reset)
3. Navigate to the card using the standard application launcher and run FirmwareUpdater.prc.
4. Click OK, click the Update Now button (I may have forgotten one or two OK clicks here so don't hesitate to correct me here).
5. Sit back and relax, it's going to take a good 10 minutes.
6. The phone will automatically hard reset at the end of the process.
Note* this upgrade is far better than the previous one with more features
That's all, really. Note that I think it does do the entire 2.09 firmware upgrade, so all this should even work when you're on an older firmware version.
Good luck!
Here are the instructions on how to fully unlock any Treo 600:
Unlocking is actually quite simple:
Part One:
1. Download and install Card Export. download Card Export shareware here .
2. Make sure you can see the Treo's SD card as a logical drive on the machine the Treo is connected to (if not connected try to sync your phone using Treo desktop manager).
3. Dowload the flash, patched.zip, here.
Skip part one if you can copy the downloaded files to your MMC card /PALM/LAUNCHER folder ***to make this folder automaticaly format the MMC card using Treo handset
Part Two:
1. Unzip all the files and copy them to the /PALM/LAUNCHER folder on your SD card.
2. Hard reset the Treo. (find the hard reset button near the battery and use your styles to reset)
3. Navigate to the card using the standard application launcher and run FirmwareUpdater.prc.
4. Click OK, click the Update Now button (I may have forgotten one or two OK clicks here so don't hesitate to correct me here).
5. Sit back and relax, it's going to take a good 10 minutes.
6. The phone will automatically hard reset at the end of the process.
Note* this upgrade is far better than the previous one with more features
That's all, really. Note that I think it does do the entire 2.09 firmware upgrade, so all this should even work when you're on an older firmware version.
Good luck!

