Today in this post I go to explain as to unblock these plates 3G of access to the Internet.
For who it does not know… they are these plates:
This was the method that I used to unblock mine in house here
In first place they must bind the plate to the computer.
Later they execute the E220 Firmware Update Wizard until your plate to be detected…
That is until seeing an image type this:
When they turn this ecrã, already they can cancel.
Later they execute the QMAT and they open the menu “Harware Forensics” and choose the option “Uses Comm. /USB Port”.
It goes to appear a window of “QC With Diag Window”.
Something as this:
Here we go to choose the “Serial one WITH Port” that says something similar to “3G PC UI Interface”.
Later they cliquem in “Send Command”.
Send goes to give to you reply to it “Successfully command”. If not to give reply or to give something as “CommError”, recommences the process since beginning.
Now where it says “Standard Mode” chooses the option “Read EFS” and carreguem in “Lets Go”.
They record the filing-cabinet.
Now it is enough to open this filing-cabinet in the Publishing Hex and to go to the menu of “Search”.
There they choose the “Datatype” of “Hex Values” and look for “53 64 2C 00”.
What they go to see is something seemed with this:
In the marked zone the red one goes to find a number of 8 numbers. This is the code of raising of the blockade of your plate
Now it is enough to use the “E220 SimLock_UnLock.exe” and introduce this code.
Your plate now is unblocked
They can use any card!
All software that I spoke here and that they need to unblock is this:
E220Update_ 11.117.10.00 .00.B268.exe
QMAT - QC Mobile Analysis Tool
E220_SimLock_UnLock.exe
Publishing Hex
For who it does not know… they are these plates:
This was the method that I used to unblock mine in house here
In first place they must bind the plate to the computer.
Later they execute the E220 Firmware Update Wizard until your plate to be detected…
That is until seeing an image type this:
When they turn this ecrã, already they can cancel.
Later they execute the QMAT and they open the menu “Harware Forensics” and choose the option “Uses Comm. /USB Port”.
It goes to appear a window of “QC With Diag Window”.
Something as this:
Here we go to choose the “Serial one WITH Port” that says something similar to “3G PC UI Interface”.
Later they cliquem in “Send Command”.
Send goes to give to you reply to it “Successfully command”. If not to give reply or to give something as “CommError”, recommences the process since beginning.
Now where it says “Standard Mode” chooses the option “Read EFS” and carreguem in “Lets Go”.
They record the filing-cabinet.
Now it is enough to open this filing-cabinet in the Publishing Hex and to go to the menu of “Search”.
There they choose the “Datatype” of “Hex Values” and look for “53 64 2C 00”.
What they go to see is something seemed with this:
In the marked zone the red one goes to find a number of 8 numbers. This is the code of raising of the blockade of your plate
Now it is enough to use the “E220 SimLock_UnLock.exe” and introduce this code.
Your plate now is unblocked
They can use any card!
All software that I spoke here and that they need to unblock is this:
E220Update_ 11.117.10.00 .00.B268.exe
QMAT - QC Mobile Analysis Tool
E220_SimLock_UnLock.exe
Publishing Hex
Last edited:
