(E)lephant | A RapidShare Share Program ! [No Limits!]
-> This program will allow it's users to share share-sites links and also to download from these share-sites automatically! (meanwhile just RS.com is supported Sad)
-> Automatic Captcha reading.
-> Automatic IP-Switching.
By passing RS.Com limits Smile
___________________[Beta Statistics:]___________________
[Current Version:]
-. 0.0.0.6B
-. Published on: 2007-12-06 07:37
-. Download from:
Code:
http://rapidshare.com/files/74674863/E-lephant.0.0.0.6B.rar
[Current Known Bugs:]
-. None Yet. Smile
[Current TODO List:]
-. add more plugins. (support more share sites downloads)
__. add premium support!
-. make a user panel for msgs/posts ++
__. ability to edit you're own posts...
__. do something with comments.
-. add updating abilities. (Temporary DecryptionCheck does it.)
[Current Ideas List:]
-. add a history tab
-. add suggested dls. (in browser tab)
-. add hotlist (searching).
___________________[Orientation Movies:]___________________
How to operate the entire (E)lephant by Adiyani [normal reconnection]
Code:
http://rapidshare.com/files/74717568/E-lephant_video.rar
> In this tab one can browse the internet freely without having to open a new browser window in his search for download links.
-> also already implemented a list of favorite share sites on the upper right corner.
The Search Page. Before Searching:
-> as you can see the searching filters comprise a realy easy and quick way to search for downloads in our data-base!
The Search Page. After Searching:
-> the search results are highly detailed and even holds the links status so that you won't get stuck with bad links!
The Search Page. After Choosing an entry:
-> the entry's description will pop-up (can be disabled) to provide you with some extra information regarding that entry.
-> notice you can also rate the entry as you see fit!
-> this is yet a share program, share your links with us through this posting page!
-> please take the time and consideration to put in as much details as you can and help us keep our data-base organized!
> you can fill in a whole list of downloads and the program will move through the list downloading them all, and it's all automatic!
-> notice the "leeching mode" icon on the top right corner, once this is set the program will download the same download over and over again, that way you can set it to download one of your own files over and over again to accomulate points through the server!
> Since this is quite comprehancable i'll eleborate only about the most important settings:
[Important Settings:]
-. make sure you have set a user-name in the options menu, you need it for posting previllages!
-. make sure you have set a reconnection method!
__. Non-Router users -> Internal reconnection should do the trick.
__. Router users-> Should use an external reconnector and set it's path. special programs for routers reconnections are made as mentioned below.
*** WITHOUT SETTING A RECONNECTION METHOD ONE WILL HAVE TO WAIT THE WAITING TIME BETWEEN FILES !!! ***
[Reconnect.exe]
- On First file finish a program will pop-up called AutoReconnect, this tool is suppose to
Disconnect One's connection from the internet and Reconnect once a download is done.
(to change the ip and avoid Waiting time)
- When it loads up choose the correct mathode for you and click save & reconnect.
*If it fails to do the job choose another mathode and try again!
*Once Exiting the program, that programs GUI won't show again! the entire process will be done in background,
to make the GUI re'appear get into the USDownloader dir and delete the file 'Reconnect.cfg'
* Internet-Connection Should be ON before the Reconnector runs!
* If none of the mathodes work for you, remove th checkmark inside the USDownloader Options->Scheduler, so that
it won't load again.
------
However, if you can't make it work and you'r a dial-up user you can try the following mathode:
(There is a prepared 'SET - Reconnector.bat' file which you can use, right click-> edit ! then just to stage 2 below!)
- open a text file anywhere, and edit it adding the following information:
Code:
@echo off
rasdial "YouDialUpConnectionName" /disconnect
ping -n 20 127.0.0.1 >nul
rasdial "YouDialUpConnectionName" "Login" "Password"
- Chnage the "YouDialUpConnectionName" with you'r connection name! and so does the
"Login" and "Password with their propper info!
(eg': my connection is-> InetCon and in file it is -> "InetCon")
* The Quoutation Marks Must Remain As They Are!
- Once done exit the '.txt' file (DON"T FORGET TO SAVE!) and rename it's extention to '.bat'
- Open in USDownloader: Settings->Scheduler, and add that '.bat' file of yours as a task to
be preformed after a file has been downloaded !
* You Need No .BAT files if everything works OK!
[Router's Reconnections:]
-. S&M Bot, is a program made for automating the key sends and/or mouse activity. by using this tool one should achieve the automation of logging into his router's page via his browser and initiate a router-reconnection.
-. once the above mentioned is done one would set the application as an external reconnector in the 'options->reconnector' tab of the (E)lephant.
-. Direct Routers Reconnectors, are programs specifically designed to call a router's reconnection.
in case you're router is on the list, just download it's pack and set the settings as you see fit! then set the program as an external reconnector in the 'options->reconnector' tab of the (E)lephant.
[Router's Reconnections Tools: ]
-> Rotal.ADSL2_.Wireless.Router routers:
http://rapidshare.com/files/73545161/RR.Rotal.ADSL2_.Wireless.Router.rar
. Tested on model: RTA1025W. {might work for others as well}
-> BFocus routers:
http://rapidshare.com/files/73561756/RR.BFocus.rar
. Tested on models: 312,270pr {might work for others as well}
-> SpeedTouch routers
http://rapidshare.com/files/72644049/RR.SpeedTouch.rar
. Tested on model: 570. {might work for others as well}
-> Siemens.adsl.sl routers
http://rapidshare.com/files/72643910/RR.Siemens.adsl.sl.rar
. Tested on model: 2141 IS. {might work for others as well}
In case you'de like me to make a new router reconnecting program for you're router,
check if it supports telnet (make a search for your router's model and add the world telnet protocol afterwards... eg. Bfocus 312 telnet protocol)
if so, contact me on ICQ: 169461989.
[Spam & Macro Bot:]
->Download Link:
http://rapidshare.com/files/67494567/Reconnecting_Suite_V2.1.rar
____________________
- This program allows you to record whatever you do and then to execute it whenever you want
to thus solving the router reconnecting issue ! Just record yourselfs entering the routers
page and reconnecting through the recording button OR design your macro by keyboard sends
to do the reconnection!
- After recorded & ran a macro to make sure it works propperly, use the autorun on start
checkbox to make it start automaticly whenever the program is ran.
- one the above is done you can just set USD to start the program after each download is finished!
- to disable the autorun on startup just untick the checkbox after the process has finished
executing (it waits for 10 seconds before it closes itself after a session is done!)
- For any other issues / questions - RTFM !!! (help button in the options page!)
____________________
i kinda think that it's self explanatory, but i'm here to help (-:
*This is the first beta however i've checked it quite thoroughly and it seems to work just fine!
PLEASE LEAVE SOME FEEDBACK IF YOU FIND ANY BUGS !
____________________
EDIT-> This program might be detected by some A/V as a "HOOKING Danger"
or something like that while trying to automaticly record a macro becouse it hooks into
windows keys/mouse sends in order to record whatever it is that the user does.
____________________
Just thought that making a macro might be troublish to some people so i've made a DEMO - MACRO
just to show you how it should be done / formed !
*Becouse the macro recording is based on exact pixels i didn't made a record but made a Macro'Send,
which sends keys directly into windows.
_
That macro if copied propperly (exactly as it is shown - | - marking the boxes!) then it should start the
windows 'RUN' window and write inside - http://192.168.0.1 and then press ENTER and waits for 5 seconds
thus opening the routers main page - then it'll send the TAB key 3 times which will switch the choosen
selection, then (assuming you've reached the USERNAME input-box) it'll write the user name and will move
to the next input box by sending another TAB key! now it'll write the given password and press ENTER.
after 4 seconds of waiting (4000) it'll send some more TAB keys to get to the Reconnect Button And then it
will send another ENTER finishing the process !
Command | Stoke Delay | Send Delay
==============================================
#r | 0 | 4000
http://192.168.0.1/{ENTER} | 180 | 5000
{TAB}{TAB}{TAB} | 100 | 1000
your user{TAB} | 170 | 1000
your pass{ENTER} | 170 | 4000
{TAB}{TAB}{TAB} | 100 | 1000
{enter} | 0 | 4000
==============================================
Of Course u should change some details regarding the time delays becouse we probably don't have the same computer
and it'll process things in diffrent speeds (-:
- pay atention - 1000 milisecs is 1 sec!
- CHANGE THE NUMBER OF TABS / USER NAME / PASSWORD accordingly !
- pay in mind that there are no spaces !
-> This program will allow it's users to share share-sites links and also to download from these share-sites automatically! (meanwhile just RS.com is supported Sad)
-> Automatic Captcha reading.
-> Automatic IP-Switching.
By passing RS.Com limits Smile
___________________[Beta Statistics:]___________________
[Current Version:]
-. 0.0.0.6B
-. Published on: 2007-12-06 07:37
-. Download from:
Code:
http://rapidshare.com/files/74674863/E-lephant.0.0.0.6B.rar
[Current Known Bugs:]
-. None Yet. Smile
[Current TODO List:]
-. add more plugins. (support more share sites downloads)
__. add premium support!
-. make a user panel for msgs/posts ++
__. ability to edit you're own posts...
__. do something with comments.
-. add updating abilities. (Temporary DecryptionCheck does it.)
[Current Ideas List:]
-. add a history tab
-. add suggested dls. (in browser tab)
-. add hotlist (searching).
___________________[Orientation Movies:]___________________
How to operate the entire (E)lephant by Adiyani [normal reconnection]
Code:
http://rapidshare.com/files/74717568/E-lephant_video.rar
> In this tab one can browse the internet freely without having to open a new browser window in his search for download links.
-> also already implemented a list of favorite share sites on the upper right corner.
The Search Page. Before Searching:
-> as you can see the searching filters comprise a realy easy and quick way to search for downloads in our data-base!
The Search Page. After Searching:
-> the search results are highly detailed and even holds the links status so that you won't get stuck with bad links!
The Search Page. After Choosing an entry:
-> the entry's description will pop-up (can be disabled) to provide you with some extra information regarding that entry.
-> notice you can also rate the entry as you see fit!
-> this is yet a share program, share your links with us through this posting page!
-> please take the time and consideration to put in as much details as you can and help us keep our data-base organized!
> you can fill in a whole list of downloads and the program will move through the list downloading them all, and it's all automatic!
-> notice the "leeching mode" icon on the top right corner, once this is set the program will download the same download over and over again, that way you can set it to download one of your own files over and over again to accomulate points through the server!
> Since this is quite comprehancable i'll eleborate only about the most important settings:
[Important Settings:]
-. make sure you have set a user-name in the options menu, you need it for posting previllages!
-. make sure you have set a reconnection method!
__. Non-Router users -> Internal reconnection should do the trick.
__. Router users-> Should use an external reconnector and set it's path. special programs for routers reconnections are made as mentioned below.
*** WITHOUT SETTING A RECONNECTION METHOD ONE WILL HAVE TO WAIT THE WAITING TIME BETWEEN FILES !!! ***
[Reconnect.exe]
- On First file finish a program will pop-up called AutoReconnect, this tool is suppose to
Disconnect One's connection from the internet and Reconnect once a download is done.
(to change the ip and avoid Waiting time)
- When it loads up choose the correct mathode for you and click save & reconnect.
*If it fails to do the job choose another mathode and try again!
*Once Exiting the program, that programs GUI won't show again! the entire process will be done in background,
to make the GUI re'appear get into the USDownloader dir and delete the file 'Reconnect.cfg'
* Internet-Connection Should be ON before the Reconnector runs!
* If none of the mathodes work for you, remove th checkmark inside the USDownloader Options->Scheduler, so that
it won't load again.
------
However, if you can't make it work and you'r a dial-up user you can try the following mathode:
(There is a prepared 'SET - Reconnector.bat' file which you can use, right click-> edit ! then just to stage 2 below!)
- open a text file anywhere, and edit it adding the following information:
Code:
@echo off
rasdial "YouDialUpConnectionName" /disconnect
ping -n 20 127.0.0.1 >nul
rasdial "YouDialUpConnectionName" "Login" "Password"
- Chnage the "YouDialUpConnectionName" with you'r connection name! and so does the
"Login" and "Password with their propper info!
(eg': my connection is-> InetCon and in file it is -> "InetCon")
* The Quoutation Marks Must Remain As They Are!
- Once done exit the '.txt' file (DON"T FORGET TO SAVE!) and rename it's extention to '.bat'
- Open in USDownloader: Settings->Scheduler, and add that '.bat' file of yours as a task to
be preformed after a file has been downloaded !
* You Need No .BAT files if everything works OK!
[Router's Reconnections:]
-. S&M Bot, is a program made for automating the key sends and/or mouse activity. by using this tool one should achieve the automation of logging into his router's page via his browser and initiate a router-reconnection.
-. once the above mentioned is done one would set the application as an external reconnector in the 'options->reconnector' tab of the (E)lephant.
-. Direct Routers Reconnectors, are programs specifically designed to call a router's reconnection.
in case you're router is on the list, just download it's pack and set the settings as you see fit! then set the program as an external reconnector in the 'options->reconnector' tab of the (E)lephant.
[Router's Reconnections Tools: ]
-> Rotal.ADSL2_.Wireless.Router routers:
http://rapidshare.com/files/73545161/RR.Rotal.ADSL2_.Wireless.Router.rar
. Tested on model: RTA1025W. {might work for others as well}
-> BFocus routers:
http://rapidshare.com/files/73561756/RR.BFocus.rar
. Tested on models: 312,270pr {might work for others as well}
-> SpeedTouch routers
http://rapidshare.com/files/72644049/RR.SpeedTouch.rar
. Tested on model: 570. {might work for others as well}
-> Siemens.adsl.sl routers
http://rapidshare.com/files/72643910/RR.Siemens.adsl.sl.rar
. Tested on model: 2141 IS. {might work for others as well}
In case you'de like me to make a new router reconnecting program for you're router,
check if it supports telnet (make a search for your router's model and add the world telnet protocol afterwards... eg. Bfocus 312 telnet protocol)
if so, contact me on ICQ: 169461989.
[Spam & Macro Bot:]
->Download Link:
http://rapidshare.com/files/67494567/Reconnecting_Suite_V2.1.rar
____________________
- This program allows you to record whatever you do and then to execute it whenever you want
to thus solving the router reconnecting issue ! Just record yourselfs entering the routers
page and reconnecting through the recording button OR design your macro by keyboard sends
to do the reconnection!
- After recorded & ran a macro to make sure it works propperly, use the autorun on start
checkbox to make it start automaticly whenever the program is ran.
- one the above is done you can just set USD to start the program after each download is finished!
- to disable the autorun on startup just untick the checkbox after the process has finished
executing (it waits for 10 seconds before it closes itself after a session is done!)
- For any other issues / questions - RTFM !!! (help button in the options page!)
____________________
i kinda think that it's self explanatory, but i'm here to help (-:
*This is the first beta however i've checked it quite thoroughly and it seems to work just fine!
PLEASE LEAVE SOME FEEDBACK IF YOU FIND ANY BUGS !
____________________
EDIT-> This program might be detected by some A/V as a "HOOKING Danger"
or something like that while trying to automaticly record a macro becouse it hooks into
windows keys/mouse sends in order to record whatever it is that the user does.
____________________
Just thought that making a macro might be troublish to some people so i've made a DEMO - MACRO
just to show you how it should be done / formed !
*Becouse the macro recording is based on exact pixels i didn't made a record but made a Macro'Send,
which sends keys directly into windows.
_
That macro if copied propperly (exactly as it is shown - | - marking the boxes!) then it should start the
windows 'RUN' window and write inside - http://192.168.0.1 and then press ENTER and waits for 5 seconds
thus opening the routers main page - then it'll send the TAB key 3 times which will switch the choosen
selection, then (assuming you've reached the USERNAME input-box) it'll write the user name and will move
to the next input box by sending another TAB key! now it'll write the given password and press ENTER.
after 4 seconds of waiting (4000) it'll send some more TAB keys to get to the Reconnect Button And then it
will send another ENTER finishing the process !
Command | Stoke Delay | Send Delay
==============================================
#r | 0 | 4000
http://192.168.0.1/{ENTER} | 180 | 5000
{TAB}{TAB}{TAB} | 100 | 1000
your user{TAB} | 170 | 1000
your pass{ENTER} | 170 | 4000
{TAB}{TAB}{TAB} | 100 | 1000
{enter} | 0 | 4000
==============================================
Of Course u should change some details regarding the time delays becouse we probably don't have the same computer
and it'll process things in diffrent speeds (-:
- pay atention - 1000 milisecs is 1 sec!
- CHANGE THE NUMBER OF TABS / USER NAME / PASSWORD accordingly !
- pay in mind that there are no spaces !
..
