Reply to thread

Message: <blockquote data-quote="kosandpol" data-source="post: 3563404" data-attributes="member: 105851">To manage windows server remotely, enable remote access on the windows server.  Then to access the server, what you need to know is the IP address of the server. If the server is connected to the net using an ADSL connection, then you need to enable port forwarding in the ADSL router for TCP port 3389 and forward the port to the Server.You will need to know the IP address of the ADSL router.You can do 2 things here. Request for a static IP from SLT or register for a no-ip.com sub domain (which is free) and configure your router for the no-ip domain or install the no-ip client in the server. Then to access your server yo only need to know the no-ip domain you registered since that will get updated every time the server ADSL IP changes.Installing software over remote desktop is possible but you need the software setup to be on the server first. ADSL  connections are just too slow to try to install software thats on your pc. So alway download the software setup to the sever first.</blockquote>

Top Bottom