Latest ads
-
Bodim.lk out now !- Manoj Suranga Bandara
- Updated:
-
Power Lifting Lever Belt- SkullVamp
- Updated:
-
port.lk Domain for sale
- Lankan-Tech
- Updated:
-
Colombo Kaduwela - Two Storey House for Sale- dilrasan
- Updated:
-
Wechat qr verification
- Pawan2005
- Updated:
How to share files between 2PCs via Ethernet LAN
- Thread starter chamidilk
- Start date
Machangs,
Lockerz is super site. i got laptop from america machan for free. it is invite only. look at this video to get free invites: http://www.youtube.com/watch?v=YWQ63B82CHs
Lockerz is super site. i got laptop from america machan for free. it is invite only. look at this video to get free invites: http://www.youtube.com/watch?v=YWQ63B82CHs
Machan Ping Wenne natthe Ube XP PC Eke Firewall eke nisa.ekata me vidihata karanna.
1.Goto Control Panal ->Security Center -> Windown Firewall
2.Click Advanced Tab ->Click Settings button at the ICMP Section.
3.Now tick(select) "allow incoming echo request" and click OK in all open Windows
dan oyata XP pc ekata ping karanna puluwan ,
*machan Run command eke pc eke nama wanuwata ip eka danna.
this must work.
etha password ekak elluwoth oyata PC ekata password ekak danna wenawa.
eke password ekek nathi nisa thamai oyata connect winna bari.
machan harigiye nattham replay karanna,harigioth add +rep
thanks
wada karanne natooooooo
mata mula sita step by step guide ekak denna
PC eke XP tiyenne LAP eke Vista tiyenne
OK Machan Here is the steps.
You Need flowing items.
1.A PC and a Laptop.(both need working network card
)2.A Cross over Ethernet Cable(if you are connect two pc's directly).
3.And a Person for configurations
Now in the XP PC Do the flowing
1.Goto Control Panel -> Network and Internet Connections -> Network Connections
2.Right Click your network adpter and click properties,Click Networking tab and double click "Internet Protocol(TCP/IP)".
3.Now you are in the "Internet Protocol(TCP/IP)" Properties windows,click genaral tab Select "Use the following IP address" and insert following IP address
for IP address field:- 192.168.100.1
for Subnet mask field:- 255.255.255.0
you don't need a default gateway for file transfer ,it's for Internet.
Now Click OK button on all open windows.
machan dan vista eka config karanna thiyenne.
1.Goto Control Panel -> Network Sharing Center
2.Select Manage network connections in the right side.Now you must see your network adapter,Right click on it and select properties
3.Select Networking tab,double click "Internet Protocol version 4(TCP/IPv4)"
4.Select "Use the following IP address" and insert following IP address
for IP address field:- 192.168.100.2
for Subnet mask field:- 255.255.255.0
you don't need a default gateway for file transfer ,it's for Internet.
Now Click OK button on all open windows.
Machan Ethernet cable eka connect karatapasse network card dekema light blink wenawada kiyala balanna (samaharawita cable eka awlakda danne na)
Machan dan wade hariyanna one. ping karanna kalin pc dekema firewall desable karanna and pc dekatama password dannath one.
dan machan ubata xp pc eke edala vista ekatai vista eka idala xp ekatai ping karanna puluwannenna one, ekiyanne
from 192.168.100.1 to 192.168.100.2
from 192.168.100.2 to 192.168.100.1
anth vista pc eke file balanna run window eke "\\192.168.100.2" kiyala denna
try karala replay karanna,
good luck
Step-by-step on how to connect two PC's via cable
This describes the proccedure to connect a PC with a laptop, which enablesa user to use Remote desktop feature and internet connection on both computers.
Schematics:
PC ---------------------------- LAPTOP -> wireless connection to internet
cross-over cable
Configuring LAPTOP:
1. Go to Control Panel -> Network connections
2. Right-click on Wireless network connection and select Properties
3. Select Advanced tab and put a thick in the box "Allow other network users to connect to this computer's Internet connection"
(You can also put a thick in the other box if you wish)
4. Confirm with the OK button and find yourself back in the Network connections window
5. Next, in Network connections Right-click on your LAN adapter, under General tab select Internet protocol (TCP/IP) and click Properties
6. Assign IP manually (192.168.0.1 - this is also the default if you use Network connection Wizard) and Subnet mask (255.255.255.0 - also default)
7. Next you must assing (one or) both DNS servers (I used the one ISP provided) - the most important thing to do is to use the same DNS when you configure the other computer!!!
8. Confirm everything and this computer is done...
Configuring PC (if you don't want to set-up Remote desktop, where PC is the host computer, start at 4.):
1. Go to Control Panel -> System -> Remote tab
2. Put a thick in the "Allow users to connect remotely to this computer"
3. Confirm with OK
4. Go to Control Panel -> Network connections
5. Right-click on your LAN adapter, under General tab select Internet protocol (TCP/IP) and click Properties
6. Assign IP manually (for example 192.168.0.2 - has to be in the same range as the IP on the other computer, but different!) and Subnet mask (the same as on the other computer - 255.255.255.0)
7. Assign Default Gateway (which is the assigned IP of the other computer, in this case 192.168.0.1)
8. Assign the same DNS as on the first computer
9. Confirm everything...
Everything should work now. Remember you have to use CROSS-OVER CABLE. If you are having problems with the connections try "playing" with the Firewall settings (under Exceptions and Advanced tab).
How to share folder in windows XP
In this tutorial we will learn how to share a folder or file so that other user on network can share file with your PC. This is very easy process which will allow you to a file or folder or drive of your computer on the LAN. But this should be done very carefully and I would recommend you not to share system drive (C :\) as you never know people on LAN could delete or alter your system file, which will render your system useless.
So, all you need to do is simply follow below steps one by one. That’s it.
Double click on My Computer and then right click on Shared Documents and select “Sharing & Security” option.
How to share folder in windows XP
87
rate or flag this pageBy rajkishor09
In this tutorial we will learn how to share a folder or file so that other user on network can share file with your PC. This is very easy process which will allow you to a file or folder or drive of your computer on the LAN. But this should be done very carefully and I would recommend you not to share system drive (C :\) as you never know people on LAN could delete or alter your system file, which will render your system useless.
So, all you need to do is simply follow below steps one by one. That’s it.
Double click on My Computer and then right click on Shared Documents and select “Sharing & Security” option.
See all 6 photos
Now click the red rectangle as mentioned in the below image. On clicking this will pop up a small window. This would appear only if you are sharing the folder on your computer for first time. If it so then skip to step 3.
Click on “Just enable file sharing” radio button & click OK button.
Check the option “Share this folder on network”, this option allows us to share the selected folder on network. Next, in the textbox specify the name of the shared folder; this name would appear on the Network. Third option “Allow network user to change my files” makes your folder read-only if it is unchecked, means user from LAN can use files of this folder in read-only mode and they cannot paste anything in this folder. And if this is option is checked then network user will have full privilege of read & write. This permission depends on you. After this click OK button.
Now you can notice that the shared document’s icon has changed and a hand like image is appeared. Congratulation! You have successfully completed the LAN connection and shared the folder. Repeat the same steps on the other PC or Laptop.
Now I m sure that you want to see the other shared PC form your PC. For that just do the following: double click on “My Network Places”. Here you should see some shared folder of your own as well as other’s PC (shared folders are only visible if you have configured properly min. two PCs). These shared folders which you can see here only display the shared resources of the same workgroup. To see the shared resources PC wise to this, click on “View Workgroup Computers” on the left pane as shown on image.
In “PC wise view of shared computers” image there is red numeric marking, where 1 tries to shows the name of the workgroup, and 2 shows the UP arrow button, on clicking which; it will show the different workgroups.
"Access is denied" error message when you try to access a folder on LAN
To resolve this problem, you must turn off Simple File Sharing, and then take ownership of the folder:
1. Turn off Simple File Sharing.
3. Click the Security tab, and then click OK on the Security message, if one appears.
4. Click Advanced, and then click the Owner tab.
5. In the Name list, click your user name, Administrator if you are logged in as Administrator, or click the Administrators group.
If you want to take ownership of the contents of that folder, click to select the Replace owner on sub containers and objects check box.
6. Click OK.
You may receive the following error message, where Folder is the name of the folder that you want to take ownership of:
You do not have permission to read the contents of directory Folder. Do you want to replace the directory permissions with permissions granting you Full Control? All permissions will be replaced if you press “Yes”.
7. Click Yes.
8. Click OK, and then reapply the permissions and security settings that you want for the folder and the folder contents.
This describes the proccedure to connect a PC with a laptop, which enablesa user to use Remote desktop feature and internet connection on both computers.
Schematics:
PC ---------------------------- LAPTOP -> wireless connection to internet
cross-over cable
Configuring LAPTOP:
1. Go to Control Panel -> Network connections
2. Right-click on Wireless network connection and select Properties
3. Select Advanced tab and put a thick in the box "Allow other network users to connect to this computer's Internet connection"
(You can also put a thick in the other box if you wish)
4. Confirm with the OK button and find yourself back in the Network connections window
5. Next, in Network connections Right-click on your LAN adapter, under General tab select Internet protocol (TCP/IP) and click Properties
6. Assign IP manually (192.168.0.1 - this is also the default if you use Network connection Wizard) and Subnet mask (255.255.255.0 - also default)
7. Next you must assing (one or) both DNS servers (I used the one ISP provided) - the most important thing to do is to use the same DNS when you configure the other computer!!!
8. Confirm everything and this computer is done...
Configuring PC (if you don't want to set-up Remote desktop, where PC is the host computer, start at 4.):
1. Go to Control Panel -> System -> Remote tab
2. Put a thick in the "Allow users to connect remotely to this computer"
3. Confirm with OK
4. Go to Control Panel -> Network connections
5. Right-click on your LAN adapter, under General tab select Internet protocol (TCP/IP) and click Properties
6. Assign IP manually (for example 192.168.0.2 - has to be in the same range as the IP on the other computer, but different!) and Subnet mask (the same as on the other computer - 255.255.255.0)
7. Assign Default Gateway (which is the assigned IP of the other computer, in this case 192.168.0.1)
8. Assign the same DNS as on the first computer
9. Confirm everything...
Everything should work now. Remember you have to use CROSS-OVER CABLE. If you are having problems with the connections try "playing" with the Firewall settings (under Exceptions and Advanced tab).
How to share folder in windows XP
In this tutorial we will learn how to share a folder or file so that other user on network can share file with your PC. This is very easy process which will allow you to a file or folder or drive of your computer on the LAN. But this should be done very carefully and I would recommend you not to share system drive (C :\) as you never know people on LAN could delete or alter your system file, which will render your system useless.
So, all you need to do is simply follow below steps one by one. That’s it.
Double click on My Computer and then right click on Shared Documents and select “Sharing & Security” option.
How to share folder in windows XP
87
rate or flag this pageBy rajkishor09
In this tutorial we will learn how to share a folder or file so that other user on network can share file with your PC. This is very easy process which will allow you to a file or folder or drive of your computer on the LAN. But this should be done very carefully and I would recommend you not to share system drive (C :\) as you never know people on LAN could delete or alter your system file, which will render your system useless.
So, all you need to do is simply follow below steps one by one. That’s it.
Double click on My Computer and then right click on Shared Documents and select “Sharing & Security” option.
Now click the red rectangle as mentioned in the below image. On clicking this will pop up a small window. This would appear only if you are sharing the folder on your computer for first time. If it so then skip to step 3.
Click on “Just enable file sharing” radio button & click OK button.
Check the option “Share this folder on network”, this option allows us to share the selected folder on network. Next, in the textbox specify the name of the shared folder; this name would appear on the Network. Third option “Allow network user to change my files” makes your folder read-only if it is unchecked, means user from LAN can use files of this folder in read-only mode and they cannot paste anything in this folder. And if this is option is checked then network user will have full privilege of read & write. This permission depends on you. After this click OK button.
Now you can notice that the shared document’s icon has changed and a hand like image is appeared. Congratulation! You have successfully completed the LAN connection and shared the folder. Repeat the same steps on the other PC or Laptop.
Now I m sure that you want to see the other shared PC form your PC. For that just do the following: double click on “My Network Places”. Here you should see some shared folder of your own as well as other’s PC (shared folders are only visible if you have configured properly min. two PCs). These shared folders which you can see here only display the shared resources of the same workgroup. To see the shared resources PC wise to this, click on “View Workgroup Computers” on the left pane as shown on image.
In “PC wise view of shared computers” image there is red numeric marking, where 1 tries to shows the name of the workgroup, and 2 shows the UP arrow button, on clicking which; it will show the different workgroups.
"Access is denied" error message when you try to access a folder on LAN
To resolve this problem, you must turn off Simple File Sharing, and then take ownership of the folder:
1. Turn off Simple File Sharing.
- Click Start, and then click My Computer.
- On the Tools menu, click Folder Options, and then click the View tab.
- Under Advanced Settings, click to clear the Use simple file sharing (Recommended) check box, and then click OK.
3. Click the Security tab, and then click OK on the Security message, if one appears.
4. Click Advanced, and then click the Owner tab.
5. In the Name list, click your user name, Administrator if you are logged in as Administrator, or click the Administrators group.
If you want to take ownership of the contents of that folder, click to select the Replace owner on sub containers and objects check box.
6. Click OK.
You may receive the following error message, where Folder is the name of the folder that you want to take ownership of:
You do not have permission to read the contents of directory Folder. Do you want to replace the directory permissions with permissions granting you Full Control? All permissions will be replaced if you press “Yes”.
7. Click Yes.
8. Click OK, and then reapply the permissions and security settings that you want for the folder and the folder contents.
How to connect two computers :
How to connect two computers in Windows XP. This will let you share files and folders, printers, play network games, etc...
Steps :
How to connect two computers in Windows XP. This will let you share files and folders, printers, play network games, etc...
Steps :
- onnect the two computers together either with a Crossover cable or a Hub/Switch to the ethernet card in your computer.
- Set the IP address on both computers. Goto Start > Control Panel > Network Connections (choose switch to classic view if you cannot see network connections)
- Look for your Local Area Connection ethernet adapter, right-click and choose properties.
- Select Internet Protocol TCP/IP and choose properties.
Setup the IP as 192.168.1.1 and the subnet mask of 255.255.255.0 on the first computer and 192.168.1.2 on the second with the same subnet mask. - Choose OK then OK/close again.
- To share your files, right click on any folder and choose Sharing to make them shared.
- You can also do this with your printers to be able to print from one computer while the printer is connected to the other.
no machan it's not a cross cable.if you connect both end to the 2 pc's network adapter there bulbs must blinks.
thanks.
machine 2 ma same work group ekak denna.Vista thiyena pc 1e eka username ekakata pasword ekak danna.VIsta thiyena pc eke partition share karanna.
partition eke right click propeties sharing wala.advance sharing.share this folder.permission wala access full control denna.
xp thieyena pc eke my network place ghin workgroup yanna.eke athi oyage vista pc eka eka athule partion athi username pass ahuwoth. vista pc eke username pass denna. try karala balanna
partition eke right click propeties sharing wala.advance sharing.share this folder.permission wala access full control denna.
xp thieyena pc eke my network place ghin workgroup yanna.eke athi oyage vista pc eka eka athule partion athi username pass ahuwoth. vista pc eke username pass denna. try karala balanna
aniwa cros cable ekak wenna one.nathnam pc 2 athara direct plug kalata wadak naa. internet roter ekata enne normal cable ekak eka hariyanne naa
