Reply to thread

Message

<blockquote data-quote="L Style" data-source="post: 9675843" data-attributes="member: 319353">lachitha@lachitha-desktop:~$ lsusbBus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 001 Device 003: ID 05c6:0018 Qualcomm, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hublachitha@lachitha-desktop:~$ this is dmesg display[UTC (1300688935)[&nbsp; &nbsp; 0.534892] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found[&nbsp; &nbsp; 0.534896] EDD information not available.[&nbsp; &nbsp; 0.545542] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3[&nbsp; &nbsp; 0.567486] ata1.00: HPA unlocked: 80291135 -&gt; 80293248, native 80293248[&nbsp; &nbsp; 0.567507] ata1.00: ATA-7: Maxtor 6E040L0, NAR61HA0, max UDMA/133[&nbsp; &nbsp; 0.567514] ata1.00: 80293248 sectors, multi 16: LBA [&nbsp; &nbsp; 0.567583] ata1.01: ATAPI: DVD-ROM DDU1632, VER AS19, max UDMA/33[&nbsp; &nbsp; 0.567628] ata1.00: limited to UDMA/33 due to 40-wire cable[&nbsp; &nbsp; 0.623764] ata1.00: configured for UDMA/33[&nbsp; &nbsp; 0.640120] ata1.01: configured for UDMA/33[&nbsp; &nbsp; 0.963458] isapnp: No Plug &amp; Play device found[&nbsp; &nbsp; 0.963895] scsi 0:0:0:0: Direct-Access&nbsp; &nbsp;&nbsp; ATA&nbsp; &nbsp; &nbsp; Maxtor 6E040L0&nbsp;&nbsp; NAR6 PQ: 0 ANSI: 5[&nbsp; &nbsp; 0.964344] sd 0:0:0:0: Attached scsi generic sg0 type 0[&nbsp; &nbsp; 0.965701] scsi 0:0:1:0: CD-ROM&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; SONY&nbsp; &nbsp;&nbsp; DVD-ROM DDU1632&nbsp; AS19 PQ: 0 ANSI: 5[&nbsp; &nbsp; 0.972773] sr0: scsi3-mmc drive: 4x/40x cd/rw xa/form2 cdda tray[&nbsp; &nbsp; 0.972788] Uniform CD-ROM driver Revision: 3.20[&nbsp; &nbsp; 0.973144] sr 0:0:1:0: Attached scsi CD-ROM sr0[&nbsp; &nbsp; 0.973325] sr 0:0:1:0: Attached scsi generic sg1 type 5[&nbsp; &nbsp; 0.973781] sd 0:0:0:0: [sda] 80293248 512-byte logical blocks: (41.1 GB/38.2 GiB)[&nbsp; &nbsp; 0.973918] sd 0:0:0:0: [sda] Write Protect is off[&nbsp; &nbsp; 0.973925] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00[&nbsp; &nbsp; 0.973995] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA[&nbsp; &nbsp; 0.974359]&nbsp; sda: sda1 sda2 &lt; sda5 sda6 sda7 sda8 &gt;[&nbsp; &nbsp; 1.028831] sd 0:0:0:0: [sda] Attached SCSI disk[&nbsp; &nbsp; 1.079782] Freeing initrd memory: 7781k freed[&nbsp; &nbsp; 1.152318] ata2.00: ATAPI: HL-DT-ST RW/DVD GCC-4522B, 1.03, max UDMA/33[&nbsp; &nbsp; 1.184312] ata2.00: configured for UDMA/33[&nbsp; &nbsp; 1.185842] scsi 1:0:0:0: CD-ROM&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; HL-DT-ST RW/DVD GCC-4522B 1.03 PQ: 0 ANSI: 5[&nbsp; &nbsp; 1.188187] sr1: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray[&nbsp; &nbsp; 1.188511] sr 1:0:0:0: Attached scsi CD-ROM sr1[&nbsp; &nbsp; 1.188672] sr 1:0:0:0: Attached scsi generic sg2 type 5[&nbsp; &nbsp; 1.188802] Freeing unused kernel memory: 660k freed[&nbsp; &nbsp; 1.190682] Write protecting the kernel text: 4680k[&nbsp; &nbsp; 1.190748] Write protecting the kernel read-only data: 1844k[&nbsp; &nbsp; 1.251375] udev: starting version 151[&nbsp; &nbsp; 1.800491] FDC 0 is a post-1991 82077[&nbsp; &nbsp; 1.816228] sis900.c: v1.08.10 Apr. 2 2006[&nbsp; &nbsp; 1.816360]&nbsp;&nbsp; alloc irq_desc for 19 on node -1[&nbsp; &nbsp; 1.816366]&nbsp;&nbsp; alloc kstat_irqs on node -1[&nbsp; &nbsp; 1.816387] sis900 0000:00:04.0: PCI INT A -&gt; GSI 19 (level, low) -&gt; IRQ 19[&nbsp; &nbsp; 1.817557] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.[&nbsp; &nbsp; 1.829473] 0000:00:04.0: Using transceiver found at address 1 as default[&nbsp; &nbsp; 1.839623] eth0: SiS 900 PCI Fast Ethernet at 0xe400, IRQ 19, 00:2a:43:00:6e:f5[&nbsp; &nbsp; 2.363066] EXT4-fs (sda1): mounted filesystem with ordered data mode[&nbsp;&nbsp; 13.703721] Adding 566264k swap on /dev/sda8.&nbsp; Priority:-1 extents:1 across:566264k [&nbsp;&nbsp; 14.038472] udev: starting version 151[&nbsp;&nbsp; 14.659640] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4[&nbsp;&nbsp; 14.809245] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00[&nbsp;&nbsp; 14.822178] Linux agpgart interface v0.103[&nbsp;&nbsp; 15.190472] agpgart-sis 0000:00:00.0: SiS chipset [1039/0741][&nbsp;&nbsp; 15.416183] lp: driver loaded but no devices found[&nbsp;&nbsp; 15.678321] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xd0000000[&nbsp;&nbsp; 15.774554] psmouse serio1: ID: 10 00 64[&nbsp;&nbsp; 16.102247] vga16fb: initializing[&nbsp;&nbsp; 16.102264] vga16fb: mapped to 0xc00a0000[&nbsp;&nbsp; 16.102556] fb0: VGA16 VGA frame buffer device[&nbsp;&nbsp; 16.378438] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4[&nbsp;&nbsp; 16.528414] type=1505 audit(1300688951.493:2):&nbsp; operation=&quot;profile_load&quot; pid=711 name=&quot;/sbin/dhclient3&quot;[&nbsp;&nbsp; 16.529057] type=1505 audit(1300688951.493:3):&nbsp; operation=&quot;profile_load&quot; pid=711 name=&quot;/usr/lib/NetworkManager/nm-dhcp-client.action&quot;[&nbsp;&nbsp; 16.529421] type=1505 audit(1300688951.493:4):&nbsp; operation=&quot;profile_load&quot; pid=711 name=&quot;/usr/lib/connman/scripts/dhclient-script&quot;[&nbsp;&nbsp; 17.132924] Console: switching to colour frame buffer device 80x30[&nbsp;&nbsp; 18.475021]&nbsp;&nbsp; alloc irq_desc for 18 on node -1[&nbsp;&nbsp; 18.475032]&nbsp;&nbsp; alloc kstat_irqs on node -1[&nbsp;&nbsp; 18.475053] Intel ICH 0000:00:02.7: PCI INT C -&gt; GSI 18 (level, low) -&gt; IRQ 18[&nbsp;&nbsp; 18.621143] eth0: Media Link Off[&nbsp;&nbsp; 18.623959] ADDRCONF(NETDEV_UP): eth0: link is not ready[&nbsp;&nbsp; 18.812139] intel8x0_measure_ac97_clock: measured 55859 usecs (2686 samples)[&nbsp;&nbsp; 18.812152] intel8x0: clocking to 48000[&nbsp;&nbsp; 18.959269] type=1505 audit(1300688953.921:5):&nbsp; operation=&quot;profile_load&quot; pid=1086 name=&quot;/usr/share/gdm/guest-session/Xsession&quot;[&nbsp;&nbsp; 18.989074] type=1505 audit(1300688953.953:6):&nbsp; operation=&quot;profile_replace&quot; pid=1088 name=&quot;/sbin/dhclient3&quot;[&nbsp;&nbsp; 18.989773] type=1505 audit(1300688953.953:7):&nbsp; operation=&quot;profile_replace&quot; pid=1088 name=&quot;/usr/lib/NetworkManager/nm-dhcp-client.action&quot;[&nbsp;&nbsp; 18.990165] type=1505 audit(1300688953.953:8):&nbsp; operation=&quot;profile_replace&quot; pid=1088 name=&quot;/usr/lib/connman/scripts/dhclient-script&quot;[&nbsp;&nbsp; 19.125180] type=1505 audit(1300688954.089:9):&nbsp; operation=&quot;profile_load&quot; pid=1091 name=&quot;/usr/bin/evince&quot;[&nbsp;&nbsp; 19.140928] type=1505 audit(1300688954.105:10):&nbsp; operation=&quot;profile_load&quot; pid=1091 name=&quot;/usr/bin/evince-previewer&quot;[&nbsp;&nbsp; 19.147856] type=1505 audit(1300688954.109:11):&nbsp; operation=&quot;profile_load&quot; pid=1091 name=&quot;/usr/bin/evince-thumbnailer&quot;[&nbsp;&nbsp; 20.566652] ppdev: user-space parallel port driver[&nbsp;&nbsp; 82.196035] usb 1-6: new high speed USB device using ehci_hcd and address 2[&nbsp;&nbsp; 82.331890] usb 1-6: configuration #1 chosen from 1 choice[&nbsp;&nbsp; 82.588568] Initializing USB Mass Storage driver...[&nbsp;&nbsp; 82.591724] scsi2 : SCSI emulation for USB Mass Storage devices[&nbsp;&nbsp; 82.593196] usbcore: registered new interface driver usb-storage[&nbsp;&nbsp; 82.593208] USB Mass Storage support registered.[&nbsp;&nbsp; 82.607341] usb-storage: device found at 2[&nbsp;&nbsp; 82.607352] usb-storage: waiting for device to settle before scanning[&nbsp;&nbsp; 87.604815] usb-storage: device scan complete[&nbsp;&nbsp; 87.605620] scsi 2:0:0:0: CD-ROM&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; HSUPA&nbsp; &nbsp; MMC Storage&nbsp; &nbsp; &nbsp; 2.31 PQ: 0 ANSI: 2[&nbsp;&nbsp; 87.606199] scsi 2:0:0:1: Direct-Access&nbsp; &nbsp;&nbsp; HSUPA&nbsp; &nbsp; MMC Storage&nbsp; &nbsp; &nbsp; 2.31 PQ: 0 ANSI: 2[&nbsp;&nbsp; 87.614748] sr2: scsi-1 drive[&nbsp;&nbsp; 87.617114] sr 2:0:0:0: Attached scsi CD-ROM sr2[&nbsp;&nbsp; 87.617783] sr 2:0:0:0: Attached scsi generic sg3 type 5[&nbsp;&nbsp; 87.618730] sd 2:0:0:1: Attached scsi generic sg4 type 0[&nbsp;&nbsp; 87.631133] sd 2:0:0:1: [sdb] Attached SCSI removable disk[&nbsp;&nbsp; 88.902556] usb 1-6: USB disconnect, address 2[&nbsp;&nbsp; 89.252032] usb 1-6: new high speed USB device using ehci_hcd and address 3[&nbsp;&nbsp; 89.386713] usb 1-6: configuration #1 chosen from 1 choice[&nbsp;&nbsp; 89.545868] scsi3 : SCSI emulation for USB Mass Storage devices[&nbsp;&nbsp; 89.583200] usb-storage: device found at 3[&nbsp;&nbsp; 89.583210] usb-storage: waiting for device to settle before scanning[&nbsp;&nbsp; 94.580705] usb-storage: device scan complete[&nbsp;&nbsp; 94.581628] scsi 3:0:0:0: CD-ROM&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; HSUPA&nbsp; &nbsp; MMC Storage&nbsp; &nbsp; &nbsp; 2.31 PQ: 0 ANSI: 2[&nbsp;&nbsp; 94.582191] scsi 3:0:0:1: Direct-Access&nbsp; &nbsp;&nbsp; HSUPA&nbsp; &nbsp; MMC Storage&nbsp; &nbsp; &nbsp; 2.31 PQ: 0 ANSI: 2[&nbsp;&nbsp; 94.589975] sr2: scsi-1 drive[&nbsp;&nbsp; 94.590451] sr 3:0:0:0: Attached scsi CD-ROM sr2[&nbsp;&nbsp; 94.590711] sr 3:0:0:0: Attached scsi generic sg3 type 5[&nbsp;&nbsp; 94.594026] sd 3:0:0:1: Attached scsi generic sg4 type 0[&nbsp;&nbsp; 94.600199] sd 3:0:0:1: [sdb] Attached SCSI removable disk</blockquote>

[QUOTE="L Style, post: 9675843, member: 319353"] lachitha@lachitha-desktop:~$ lsusb Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 05c6:0018 Qualcomm, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub lachitha@lachitha-desktop:~$ this is dmesg display [UTC (1300688935) [ 0.534892] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.534896] EDD information not available. [ 0.545542] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.567486] ata1.00: HPA unlocked: 80291135 -> 80293248, native 80293248 [ 0.567507] ata1.00: ATA-7: Maxtor 6E040L0, NAR61HA0, max UDMA/133 [ 0.567514] ata1.00: 80293248 sectors, multi 16: LBA [ 0.567583] ata1.01: ATAPI: DVD-ROM DDU1632, VER AS19, max UDMA/33 [ 0.567628] ata1.00: limited to UDMA/33 due to 40-wire cable [ 0.623764] ata1.00: configured for UDMA/33 [ 0.640120] ata1.01: configured for UDMA/33 [ 0.963458] isapnp: No Plug & Play device found [ 0.963895] scsi 0:0:0:0: Direct-Access ATA Maxtor 6E040L0 NAR6 PQ: 0 ANSI: 5 [ 0.964344] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.965701] scsi 0:0:1:0: CD-ROM SONY DVD-ROM DDU1632 AS19 PQ: 0 ANSI: 5 [ 0.972773] sr0: scsi3-mmc drive: 4x/40x cd/rw xa/form2 cdda tray [ 0.972788] Uniform CD-ROM driver Revision: 3.20 [ 0.973144] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 0.973325] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 0.973781] sd 0:0:0:0: [sda] 80293248 512-byte logical blocks: (41.1 GB/38.2 GiB) [ 0.973918] sd 0:0:0:0: [sda] Write Protect is off [ 0.973925] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.973995] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.974359] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > [ 1.028831] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.079782] Freeing initrd memory: 7781k freed [ 1.152318] ata2.00: ATAPI: HL-DT-ST RW/DVD GCC-4522B, 1.03, max UDMA/33 [ 1.184312] ata2.00: configured for UDMA/33 [ 1.185842] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4522B 1.03 PQ: 0 ANSI: 5 [ 1.188187] sr1: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray [ 1.188511] sr 1:0:0:0: Attached scsi CD-ROM sr1 [ 1.188672] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 1.188802] Freeing unused kernel memory: 660k freed [ 1.190682] Write protecting the kernel text: 4680k [ 1.190748] Write protecting the kernel read-only data: 1844k [ 1.251375] udev: starting version 151 [ 1.800491] FDC 0 is a post-1991 82077 [ 1.816228] sis900.c: v1.08.10 Apr. 2 2006 [ 1.816360] alloc irq_desc for 19 on node -1 [ 1.816366] alloc kstat_irqs on node -1 [ 1.816387] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.817557] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. [ 1.829473] 0000:00:04.0: Using transceiver found at address 1 as default [ 1.839623] eth0: SiS 900 PCI Fast Ethernet at 0xe400, IRQ 19, 00:2a:43:00:6e:f5 [ 2.363066] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 13.703721] Adding 566264k swap on /dev/sda8. Priority:-1 extents:1 across:566264k [ 14.038472] udev: starting version 151 [ 14.659640] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 14.809245] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00 [ 14.822178] Linux agpgart interface v0.103 [ 15.190472] agpgart-sis 0000:00:00.0: SiS chipset [1039/0741] [ 15.416183] lp: driver loaded but no devices found [ 15.678321] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xd0000000 [ 15.774554] psmouse serio1: ID: 10 00 64 [ 16.102247] vga16fb: initializing [ 16.102264] vga16fb: mapped to 0xc00a0000 [ 16.102556] fb0: VGA16 VGA frame buffer device [ 16.378438] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 16.528414] type=1505 audit(1300688951.493:2): operation="profile_load" pid=711 name="/sbin/dhclient3" [ 16.529057] type=1505 audit(1300688951.493:3): operation="profile_load" pid=711 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 16.529421] type=1505 audit(1300688951.493:4): operation="profile_load" pid=711 name="/usr/lib/connman/scripts/dhclient-script" [ 17.132924] Console: switching to colour frame buffer device 80x30 [ 18.475021] alloc irq_desc for 18 on node -1 [ 18.475032] alloc kstat_irqs on node -1 [ 18.475053] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 18.621143] eth0: Media Link Off [ 18.623959] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.812139] intel8x0_measure_ac97_clock: measured 55859 usecs (2686 samples) [ 18.812152] intel8x0: clocking to 48000 [ 18.959269] type=1505 audit(1300688953.921:5): operation="profile_load" pid=1086 name="/usr/share/gdm/guest-session/Xsession" [ 18.989074] type=1505 audit(1300688953.953:6): operation="profile_replace" pid=1088 name="/sbin/dhclient3" [ 18.989773] type=1505 audit(1300688953.953:7): operation="profile_replace" pid=1088 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 18.990165] type=1505 audit(1300688953.953:8): operation="profile_replace" pid=1088 name="/usr/lib/connman/scripts/dhclient-script" [ 19.125180] type=1505 audit(1300688954.089:9): operation="profile_load" pid=1091 name="/usr/bin/evince" [ 19.140928] type=1505 audit(1300688954.105:10): operation="profile_load" pid=1091 name="/usr/bin/evince-previewer" [ 19.147856] type=1505 audit(1300688954.109:11): operation="profile_load" pid=1091 name="/usr/bin/evince-thumbnailer" [ 20.566652] ppdev: user-space parallel port driver [ 82.196035] usb 1-6: new high speed USB device using ehci_hcd and address 2 [ 82.331890] usb 1-6: configuration #1 chosen from 1 choice [ 82.588568] Initializing USB Mass Storage driver... [ 82.591724] scsi2 : SCSI emulation for USB Mass Storage devices [ 82.593196] usbcore: registered new interface driver usb-storage [ 82.593208] USB Mass Storage support registered. [ 82.607341] usb-storage: device found at 2 [ 82.607352] usb-storage: waiting for device to settle before scanning [ 87.604815] usb-storage: device scan complete [ 87.605620] scsi 2:0:0:0: CD-ROM HSUPA MMC Storage 2.31 PQ: 0 ANSI: 2 [ 87.606199] scsi 2:0:0:1: Direct-Access HSUPA MMC Storage 2.31 PQ: 0 ANSI: 2 [ 87.614748] sr2: scsi-1 drive [ 87.617114] sr 2:0:0:0: Attached scsi CD-ROM sr2 [ 87.617783] sr 2:0:0:0: Attached scsi generic sg3 type 5 [ 87.618730] sd 2:0:0:1: Attached scsi generic sg4 type 0 [ 87.631133] sd 2:0:0:1: [sdb] Attached SCSI removable disk [ 88.902556] usb 1-6: USB disconnect, address 2 [ 89.252032] usb 1-6: new high speed USB device using ehci_hcd and address 3 [ 89.386713] usb 1-6: configuration #1 chosen from 1 choice [ 89.545868] scsi3 : SCSI emulation for USB Mass Storage devices [ 89.583200] usb-storage: device found at 3 [ 89.583210] usb-storage: waiting for device to settle before scanning [ 94.580705] usb-storage: device scan complete [ 94.581628] scsi 3:0:0:0: CD-ROM HSUPA MMC Storage 2.31 PQ: 0 ANSI: 2 [ 94.582191] scsi 3:0:0:1: Direct-Access HSUPA MMC Storage 2.31 PQ: 0 ANSI: 2 [ 94.589975] sr2: scsi-1 drive [ 94.590451] sr 3:0:0:0: Attached scsi CD-ROM sr2 [ 94.590711] sr 3:0:0:0: Attached scsi generic sg3 type 5 [ 94.594026] sd 3:0:0:1: Attached scsi generic sg4 type 0 [ 94.600199] sd 3:0:0:1: [sdb] Attached SCSI removable disk [/QUOTE]

Verification

Nawa warak dahaya keeyada? (Namaya wadi kireema dahaya)

Search

Latest ads

Reply to thread