ADSL settings help needed

[~v3n0m~]

can some one tell me the correct configuration for the following settings?

1) there is a drop down menu called "PVC" and there is a list like "Pvc0, Pvc1"

2) VPI

3) VCI

4) Authentication Type (Auto/PAP/CHAP)

5) MTU

6) MRU

7) Default Route

8) PPoE Pass Through.

 

[DragonD]

VC0 Set VPI to 8
Set VCI to 35
Encapsulation = PPPoA VC Mux (or TCP over ATM)


in some areas it is PPPoE LLC

 

[~v3n0m~]

VC0 Set VPI to 8
Set VCI to 35
Encapsulation = PPPoA VC Mux (or TCP over ATM)


in some areas it is PPPoE LLC

thanks

 

[DilumNadeesha]

thanks

 

[DragonD]

thanks

U r welcome

 

[sandamal666]

PPPoE should work

 

[DragonD]

thanks

U 2

 

[geethq]

can some one tell me the correct configuration for the following settings?

1) there is a drop down menu called "PVC" and there is a list like "Pvc0, Pvc1"

2) VPI

3) VCI

4) Authentication Type (Auto/PAP/CHAP)

5) MTU

6) MRU

7) Default Route

8) PPoE Pass Through.

owa router eken router ekata ahana details wenas wenawa

[FONT=Verdana, Arial]Protocol -PPPOE[/FONT] [FONT=Verdana, Arial]

​

[/FONT] [FONT=Verdana, Arial]VPI/VCI[/FONT] [FONT=Verdana, Arial]/[/FONT] -8/35

[FONT=Verdana, Arial]Encapsulation- LLC[/FONT] [FONT=Verdana, Arial]

[/FONT] [FONT=Verdana, Arial]QoS Class- UBR[/FONT] [FONT=Verdana, Arial]

​

[/FONT] [FONT=Verdana, Arial]PCR/SCR/MBS[/FONT] [FONT=Verdana, Arial]//[/FONT]- [FONT=Verdana, Arial]4000/4000/10

IP assigned by ISP- yes[/FONT] [FONT=Verdana, Arial]

​

[/FONT] [FONT=Verdana, Arial]Connection Type -Auto[/FONT] [FONT=Verdana, Arial]

​

[/FONT] [FONT=Verdana, Arial]Idle Time (Minute)[/FONT] -20min

[FONT=Verdana, Arial]Password [/FONT] [FONT=Verdana, Arial]MTU - 1492
[/FONT]

 

[~v3n0m~]

owa router eken router ekata ahana details wenas wenawa

[FONT=Verdana, Arial]Protocol -PPPOE[/FONT] [FONT=Verdana, Arial]

​

[/FONT] [FONT=Verdana, Arial]VPI/VCI[/FONT] [FONT=Verdana, Arial]/[/FONT] -8/35

[FONT=Verdana, Arial]Encapsulation- LLC[/FONT] [FONT=Verdana, Arial]

[/FONT] [FONT=Verdana, Arial]QoS Class- UBR[/FONT] [FONT=Verdana, Arial]

​

[/FONT] [FONT=Verdana, Arial]PCR/SCR/MBS[/FONT] [FONT=Verdana, Arial]//[/FONT]- [FONT=Verdana, Arial]4000/4000/10

IP assigned by ISP- yes[/FONT] [FONT=Verdana, Arial]

​

[/FONT] [FONT=Verdana, Arial]Connection Type -Auto[/FONT] [FONT=Verdana, Arial]

​

[/FONT] [FONT=Verdana, Arial]Idle Time (Minute)[/FONT] -20min

[FONT=Verdana, Arial]Password [/FONT] [FONT=Verdana, Arial]MTU - 1492
[/FONT]

thanks machan

 

[zCexVe]

Protocol must be PPPoE for you guys-(Point to Point protocol over ethernet)
Encap should be LLC
TTL max is 1500.
VPI=8
VCI=30~35
Others should not be much of a problem.

 

[Wolverine GTR]

VC0 Set VPI to 8
Set VCI to 35
Encapsulation = PPPoA VC Mux (or TCP over ATM)


in some areas it is PPPoE LLC