Reply to thread

Message: <blockquote data-quote="GNS" data-source="post: 3284771" data-attributes="member: 14559">HUAWEI E220 Installer is a Linux installer for HUAWEI E220 USB modem.                                                                                                                                                                                                   HUAWEI E220 Installer is a Linux installer for HUAWEI E220 USB modem. This is not for sale. You can change a password, phone dialer and username at /etc/wvdial.conf after installing a package. If you use this, you are agree that all fault it's not my responsible. Use this at your own risk. I has tested to x86, for other architecture such as amd etc, just try it and send me a comment at, <a href="http://mustakim.blogster.com" target="_blank">http://mustakim.blogster.com</a>1. After extract tar.gz file, change directories to the file and be the su@superuser@sudo. However, you can try both of them.Installation instructions:For installation, firs you must be a root and run this command:make special (for mandriva and sabayon)make install2.Dial wvdial huawei or sh /etc/mod.sh at terminal or use kppp to dial.3. I have test to 16 distro (top 20 distro at distrowatch) and it's work. But it doesn't work with FreeBSD, Mepis 5, gOS 2.0 Beta and Zenwalk 5.04. For opensuse, copy and paste all of this at terminal. Dont forget to be a root first.    tar xzvf lib.tar.gz        cp 99-huawei.rules /etc/udev/rules.d/    cp huawei-mobile.sh /lib/udev/    mkdir -p /etc/chatscripts/    cp huawei-e220.chat /etc/chatscripts/    cp huawei-e220 /etc/ppp/peers/    cp 10-huawei.rules /etc/udev/rules.d/    cp h3g /etc/ppp/peers/    cp huawei.sh /etc/    cp huawei /etc/ppp/peers/    cp huawei-chat.sh /usr/sbin/    cp huawei-prep /etc/chatscripts/    cp huawei-prep-nopin /etc/chatscripts/    cp options /etc/ppp/    cp pap-secrets /etc/ppp/    cp chap-secrets /etc/ppp/    cp con/huawei /etc/chatscripts/    cp h3g.chat /etc/ppp/peers/    cp huaweiAktBbo-i386.out /usr/sbin/    cp wvdial /etc/ppp/peers/    cp con/wvdial /usr/bin    cp con/wvdialconf /usr/bin    mkdir -p /usr/man/    mkdir -p /usr/man/man1/    cp con/wvdial.1 /usr/man/man1    cp con/wvdialconf.1 /usr/man/man1    cp resolv.conf /etc/    cp wvdial.conf /etc    cp mod.sh /etc    mv libstdc++-libc6.1-1.so.2 /usr/lib    mv libg++.so.2.7.2 /usr/lib    mv libg++.so.2.7.2.8 /usr/lib    mv libstdc++.so.2.7.2 /usr/lib    mv libstdc++.so.2.7.2.8 /usr/lib    mv libstdc++.so.2.8 /usr/lib    mv libstdc++.so.2.8.0 /usr/lib    mv libstdc++.so.2.9 /usr/lib    mv libstdc++.so.2.9.dummy /usr/lib    mv libstdc++-2-libc6.1-1-2.9.0.so /usr/lib    mv libstdc++-3-libc6.2-2-2.10.0.so /usr/lib    mv libstdc++-libc6.2-2.so.3 /usr/lib    cp huaweiAktBbo-i386.out /etc/    cp huaweiAktBbo-arm.out  /etc/    chmod a+x /etc/huaweiAktBbo-i386.out    /etc/huaweiAktBbo-i386.out    cp huaweiAktBbo.c /etc/    chmod a+x /etc/huaweiAktBbo-arm.out    chmod a+x /etc/huaweiAktBbo.c    sh /etc/huawei.sh    sh /etc/mod.shBe a root and gedit/kate wvdial.conf at /etc/wvdial.conf. Transfer this text:#internet Dialer version 1.40#created by Mustakim#Written for the linux modem# Change Log:## Added support for HSDPA.# Added Headers and version control.[Dialer Defaults]Phone = *99# (or can be *99***4#)Username = mustakim (or whatever)Password = samsung (or whatever)Stupid Mode = 1Dial Command = ATDT[Dialer huawei]Modem = /dev/ttyUSB0Baud = 1800000Init2 = ATZInit3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0ISDN = 0Modem Type = Analog ModemInit4 = AT+CGDCONT=1,"IP","internet"List of Linux distribution that has been successfully tested: · Opensuse 10.3, 11 Alpha 0-1-2· Fedora 7, 8, 9 Alpha· Mandriva 2008.0· Sabayon Mini 2007· Ubuntu 7.10 (64bit), 8.04 Alpha 1-4· Kubuntu 7.10· Mint Daryna· PclinuxOS 2007<a href="http://linux.softpedia.com/get/Internet/HUAWEI-E220-Installer-34846.shtml" target="_blank">Source</a></blockquote>

Verification: Dahaya deken beduwama keeyada?

Top Bottom