BAB Sectors

Yaarnick

Well-known member
  • Mar 13, 2007
    1,337
    44
    48
    43
    London
    BAD Sectors

    Mege hard disk eke BAD sectors avilla. Is there any software to remove them or separate them.

    Urgent...


    Thanks...
     
    Last edited:

    Yaarnick

    Well-known member
  • Mar 13, 2007
    1,337
    44
    48
    43
    London
    henderson said:
    try low level formatting if it does not works you have to replace it, one of my drive also has bad sectors and according to the vendor drive has to be replaced.


    Can you tell me how to do low level formatting?

    Thanks..
     
    Last edited:

    Mozilla

    Well-known member
  • SectorHDD1.jpg


    SectorHDD3.jpg


    SectorHDD3.jpg


    SectorHDD3.jpg


    Drive level testing
    - main function is testing and repair (regenerates) bad sectors for detected devices
    - you get many information about detected devices

    File level testing
    - read/find/check items (MBR, boot, directories, etc.) of file system FAT12/16/32
    - check/remove (regenerates) bad sectors records, flags in FAT table

    Development of real mode versions of HDAT2 is finished/stopped.

    Features:
    * fully implemented commands: SET MAX, SET SECURITY, Device Configuration Overlay
    * device access with interrupt 13h, direct via ATA ports, with ASPI drivers
    * detects ATA/ATAPI/SATA/SATA with NCQ devices with on-board and add-on controller cards
    * detects USB devices via USB ASPI driver only
    * detects SCSI hard drives via INT13h or ASPI drivers
    * other SCSI devices are detected via ASPI drivers only (must be loaded before)
    * with ASPI drivers you got more informations about SCSI devices
    * test and repair device for bad sectors
    * many different test-functions for hard drives
    * resize hard drives which supports SET MAX ADDRESS/EXT (supports 28/48-bits LBA addressing modes)
    * drive lock detection via security feature (Security Menu)
    * S.M.A.R.T. functions for ATA/SATA and SCSI/USB drives only
    * informations about devices (ATA/ATAPI, INT13h, ASPI)
    * sector viewer for devices (also for ZIP, CD-data discs)
    * to access ATA/SATA CD-ROM drive you don't need any driver or MSCDEX
    * enable/disable some features for direct-access devices
    * Device Configuration Overlay (DCO) feature set (you can restore a full capacity or allow/disallow some feature sets of hard drive)