Reply to thread

Message: <blockquote data-quote="Gomida" data-source="post: 25365874" data-attributes="member: 11879">I'm very sorry for the delay,Internet - Working yes very well, PeoTV - Rupavahini only. it's a simple setup - just plug and play kind of thing. Also I have some TP-Link routers to use as an alternative instead of this. I have successfully bridged to the original F660 SLT router and F660 shows the signal too. I've opened a separate SSID (SSID4) to use with this to avoid any conflicts. Only issue is I can't find this setting on the Original ZTE F660 (even under "administrator" user)The only settings I found in the whole modem attached to LAN4 was<ul> <li data-xf-list-type="ul">Network->LAN -> DHCP Port Service ->LAN4 was set to WAN (I made SSID4 set to WAN too but no effect)</li> <li data-xf-list-type="ul">Application -> Multicast -> VLAN -> LAN4 has a setting called "50" ( I made same set to SSID 4 but no effect)</li> </ul>Just as connecting to a normal router - ethernet is plugged to this gadget and gadget is powered by USB 5V. I can connect to a normal router too (have some extra ones lying around) but anyway the bridge works, ZTE shows packets from SSID4.Internet_TR069omci_ipv4_dhcp_2are the only two options I haveI do not have a IPTV_ setting in the whole F660 router (still PeoTV works without issues when connected via ethernet)</blockquote>

Top Bottom