Mobile Tricks Tikak denawada????????

coollifestyle4u

Well-known member
  • Jun 16, 2008
    39,931
    2,501
    113
    .:මහනුවර:.
    This will put your phone into programming mode, and you'll be presented with the programming menu.
    2) Select "NAM1"
    3) Select "PSID/RSID"
    4) Select "P/RSID 1"
    Note: Any of the P/RSIDs will work
    5) Select "System Type" and set it to Private
    6) Select "PSID/RSID" and set it to 1
    7) Select "Connected System ID"
    Note: Enter your System ID for Cantel, which is 16401 or 16423. If you don't know yours,
    ask your local dealer for it.
    8) Select "Alpha Tag"
    9) Enter a new tag, then press OK
    10) Select "Operator Code (SOC)" and set it to 2050
    11) Select "Country Code" and set it to 302 for Canada, and 310 for the US.
    12) Power down the phone and power it back on again
    ISDN Code
    To check the ISDN number on your Nokia use this code *#92772689#

     

    coollifestyle4u

    Well-known member
  • Jun 16, 2008
    39,931
    2,501
    113
    .:මහනුවර:.
    Ericsson T20

    MENU tecnichal Info
    [type] >*<<*<*

    Displays :
    1] Info service
    1] Info SW
    2] Info hardware
    3] SIMlock
    4]setup


    2] Service setup
    1] Contrast

    3]Service Test
    1] Display
    2]Leds
    3]Keyboard
    4] ringer
    5] Vibration
    6]Headset
    7] Microphone
    8]Clock
    4] Names List

    MENU info
    [Type] >*<<**<
    Network and Subnetwork : NCK and NSCK
     

    coollifestyle4u

    Well-known member
  • Jun 16, 2008
    39,931
    2,501
    113
    .:මහනුවර:.
    Ericsson T18s/T10/A1018s

    >*<<*<* software
    CXC125065 Internal product code
    PRG
    970715 1515 Software version and SW rev.
    <* CLR <><**
    >*<<*<*> Displays texts and messages in the phone
    It will be displayed " TEXT " then push YES
    < and > are the right and left menu's keys
    !!!><**
    Control /Enable SIM Lock!!!
     

    coollifestyle4u

    Well-known member
  • Jun 16, 2008
    39,931
    2,501
    113
    .:මහනුවර:.
    .:: Samsung ::.

    Samsung SGH600/2100DB

    IMEI number: * # 0 6 #
    Software version: * # 9 9 9 9 # albo * # 0 8 3 7 #
    Net Monitor: * # 0 3 2 4 #
    Chaning LCD contrast: * # 0 5 2 3 #
    Memory info: * # 0 3 7 7 # albo * # 0 2 4 6 #
    Reset pamieci (SIMLOCK`a removing!!!): *2767*3855#
    Reset pamieci CUSTOM: *2767*2878#
    Battery state: * # 9 9 9 8 * 2 2 8 #
    Alarm beeper: *#9998*289#
    Vibra test: *#9998*842#
     

    coollifestyle4u

    Well-known member
  • Jun 16, 2008
    39,931
    2,501
    113
    .:මහනුවර:.
    .:: Panasonic ::.

    Panasonic gd90 gd93

    *#9999# SW - Type the code on switch on , during network seek
    -Vers. SW and production code
    Enable ringing and vibration contemporarily
    Enable vibration with # then increase volume with "tone menu "
     

    coollifestyle4u

    Well-known member
  • Jun 16, 2008
    39,931
    2,501
    113
    .:මහනුවර:.
    Panasonic gd70

    *#9999# SW - Type the code on switch on , during network seek
    -Vers. SW and production code
    Enable ringing and vibration contemporarily
    Enable vibration with # then increase volume with "tone menu "
     

    coollifestyle4u

    Well-known member
  • Jun 16, 2008
    39,931
    2,501
    113
    .:මහනුවර:.
    .:: Acer ::.

    Acer V 750

    *#400# Display Adc/ Set Cal-Value -
    *#402# Set LCD Contrast
    *#403# Display Errors Info
    *#300# Display Info Hw & Sw
    *#301# Menu Test
    *#302# Menu Acoustics
    *#303# (Settings saved) Set English language?
    *#307# Menu Engineering
    *#311# Reset Phone Code - [ Also reset Security Codes ! ]
    *#330# (Execute not success) [ unknown ]
    *#331# (Service deactivated) [ unknown ]
    *#332# (Service unavailable)[ unknown ]
    *#333# (Execute not success)[ unknown ]
    *#351# (Service unavailable) [ unknown ]
    *#360# (Invalid input)[ unknown ]
    *#361# (Invalid input) [ unknown ]
    *#362# (Invalid input) [ unknown ]
    *#363# (Invalid input) [ unknown ]