Need to OC my RAM

[deegopower]

ithn ban onama board ekak support karana Max FSB walata wada yanne kohomada

MAX fsb paninna widiyak ne.........

 

[geethq]

ithn ban onama board ekak support karana Max FSB walata wada yanne kohomada

menna magul katha karanawa

 

[nagaya]

onna kiwwa
G31 2 eke E5200 3.7 yanne
ekath OC board eka ne
5k wenne

umbe multi keeyada?

 

[geethq]

umbe multi keeyada?

mag malti
makkatey
11 ne ayy

 

[gayannr]

ayy eta lesi nadda jumper eka maru karana eka

oya board eke bios reset button na neda?
mars eke edala udata thiyenawa

just pulling out the battery and re seat it again, it's easier than finding a teenie weenie jumper and fiddling with it..
no! mine doesn't have reset buttons..

 

[nagaya]

mag malti
makkatey
11 ne ayy

umbeth board eka MAX FSB 1333.3Mhz neda ? ekane 3.7Ghz max wenne

 

[nagaya]

just pulling out the battery and re seat it again, it's easier than finding a teenie weenie jumper and fiddling with it..
no! mine doesn't have reset buttons..

mata dan hithuna jumper eka wenuwata button ekak paassanna....kohomada mage tikiri mole ?

 

[deegopower]

mata dan hithuna jumper eka wenuwata button ekak paassanna....kohomada mage tikiri mole ?

ow ithin switch ekak dannatha fuluwan..........wedak ne habei..oka hema welawema press kora koroa innawada.......nene.......

 

[geethq]

umbeth board eka MAX FSB 1333.3Mhz neda ? ekane 3.7Ghz max wenne

mona magul kath koranawada manda
mage thiyenne E2200
mama karapu ekak gana newey kiwwe

E5200 2.5GHz
12.5X200 =2.5GHzstock


12.5X296=3.7GHz(FSB1184)

 

[nagaya]

mona magul kath koranawada manda
mage thiyenne E2200
mama karapu ekak gana newey kiwwe

E5200 2.5GHz
12.5X200 =2.5GHzstock


12.5X296=3.7GHz(FSB1184)

hari wadima BUS ekak thiyenwane bn....
Mage E7200 ekai wade...multi 9.5 ne....12.5 newe ne

 

[geethq]

umbeth board eka MAX FSB 1333.3Mhz neda ? ekane 3.7Ghz max wenne

dan balanna E6750 2.66Stock

8X333-2.66GHz
ae dextor eka 3.7~ walata genichcha
ee kiyanne FSB eka 462~(1850MHz)

uge board eka max 1333 unata OC koranna bari unada?

 

[deegopower]

mage multiya 12.0.............

 

[gayannr]

onna kiwwa
G31 2 eke E5200 3.7 yanne
ekath OC board eka ne
5k wenne

Clown!
E5200's multi is 12.5 so the FSB @ 3.7 is 1184
E6750's multi is 8 so the FSB @ 3.4 is 1700



newer penryn dual cores are highly overclockable.
Besides when I bought the Foxconn G33M (10K) the G31 was 7.5K or something
and the Intel G33M was like 13K

 

[nagaya]

dan balanna E6750 2.66Stock

8X333-2.66GHz
ae dextor eka 3.7~ walata genichcha
ee kiyanne FSB eka 462~(1850MHz)

uge board eka max 1333 unata OC koranna bari unada?

ai ban voltage upping karanna one max bus eken passe
intel board wala volt upping be ne

 

[geethq]

dan Ape gayan 3.4 giya E6750

425X4=1700 FSB eka

425X8=3.4GHz
uge max 1333MHz
uta bari unada

 

[nagaya]

Clown!
E5200's multi is 12.5 so the FSB @ 3.7 is 1184
E6750's multi is 8 so the FSB @ 3.4 is 1700



newer penryn dual cores are highly overclockable.
Besides when I bought the Foxconn G33M (10K) the G31 was 7.5K or something
and the Intel G33M was like 13K

Foxconn G31 Rs5000k wage ne? chanaka89 gawa thiyenawa...

 

[deegopower]

voltage handling.........is obsolete.........on InTEL
but INTEL boards are running like a DREAM.......so smooth......

 

[nagaya]

dan Ape gayan 3.4 giya E6750

425X4=1700 FSB eka

425X8=3.4GHz
uge max 1333MHz
uta bari unada

yakooo volt upping
umba walge paagan

 

[nagaya]

voltage handling.........is obsolete.........on InTEL
but INTEL boards are running like a DREAM.......so smooth......

heenenda ban?

 

[geethq]

Clown!
E5200's multi is 12.5 so the FSB @ 3.7 is 1184
E6750's multi is 8 so the FSB @ 3.4 is 1700



newer penryn dual cores are highly overclockable.
Besides when I bought the Foxconn G33M (10K) the G31 was 7.5K or something
and the Intel G33M was like 13K

kawda na kiwwe ara mama dala thiyenne ubata essella
uba magulak katha karanawa mama kiwwada oka OC koranna bae kiyala