Technical Specifications
24-bit Analog-to-Digital conversion of analog inputs at 96kHz sample rate
24-bit Digital-to-Analog conversion of digital sources at 96kHz to analog 7.1 speaker output
24-bit Digital-to-Analog conversion of stereo digital sources at 192kHz to stereo output
16-bit to 24-bit recording sampling rates: 8, 11.025, 16, 22.05, 24, 32, 44.1, 48 and 96kHz
ASIO 2.0 support at 16-bit/44.1kHz, 16-bit/48kHz, 24-bit/44.1kHz 24-bit/48kHz and 24-bit/96kHz with direct monitoring
Enhanced SoundFont support at up to 24-bit resolution
Audio Performance (Rated Output @ 2Vrms)
Signal-to-Noise Ratio (20kHz Low-pass filter, A-Weighted)
Stereo Output
109dB
Front and Rear Channels
109dB
Center, Subwoofer and Side Channels
109dB
Total Harmonic Distortion + Noise at 1kHz (20kHz Low-pass filter) = 0.004%
Frequency Response (-3dB, 24-bit/96kHz input ) = <10Hz to 46kHz
Frequency Response (-3dB, 24-bit/192kHz input) = <10Hz to 88kHz (Stereo only)
On-Board Connectivity
FlexiJack (Performing a 3-in-1 function, Line In / Microphone / Digital Out) via 3.50 mm minijack
Line level out (Front / Rear / Side / Center / Subwoofer) via 3.50 mm minijacks
AUX_IN line-level analog input via 4-pin Molex connector on card
One AD_Link (26 pin) connector for linking to the X-Fi I/O Console (upgrade option)
I/O Drive Connectivity
Two RCA jacks for coaxial SPDIF input and output
Two RCA jacks for Auxiliary input
Two optical connectors for optical SPDIF input and output
Two mini MIDI female connectors for MIDI input and output
Headphone output and volume control via 6.35 mm (1/4-inch) stereo jack
Shared line-level analog Line/Microphone input via 6.35 mm (1/4-inch) stereo jack
SOLD
Last edited:
