Speed eka hoyanne kohomada?

[skybirb]

DDR2 2Gb ram ekaka speed eka (bus) check karanne kohomada?
Mama 800Mhz ekak Gaththa ....Namuth eka CPUz software eke pennanne
Max bandwidth Pc2-6400 (400Mhz) kiyala.

Ithi kawruhari kiyanawada meka mewidiyatada pennanne neththam mage ram eke bus speed eka 400Mhz mada kiyala?

 

[kinkon]

Motherboard eka max support karanne 400Mhz danne na...

 

[Renesas]

EVEREST Dala Balana

Serial - registration:Name: Dn_35 Serial: C4J1IPHG47A9FC68RFPFLAR6L

 

[skybirb]

Motherboard eka max support karanne 400Mhz danne na...

Mother board eka suport karanawa.

 

[skybirb]

EVEREST Dala Balana

Serial - registration:Name: Dn_35 Serial: C4J1IPHG47A9FC68RFPFLAR6L

Dl karanna puluwanweida danne .....Airtel connection eka credit limit eka exceed kara kiyala connection eka disconnect karala ....Log wela inne Prepaid eken...Eketh balance eka ????

Bt thanks.

 

[skybirb]

 

[asachan]

DDR2 2Gb ram ekaka speed eka (bus) check karanne kohomada?
Mama 800Mhz ekak Gaththa ....Namuth eka CPUz software eke pennanne
Max bandwidth Pc2-6400 (400Mhz) kiyala.

Ithi kawruhari kiyanawada meka mewidiyatada pennanne neththam mage ram eke bus speed eka 400Mhz mada kiyala?

Yeah u will defiantly get 800 one but the cause is this

1, Bandwidth mean the possible strength of the data can travel between given two points. so this is where FSB came from. FSB means how much strength the data can pass from CPU to RAM and Visa verse . so even ur RAM is 800 MH but the Total FSB is 400MH

2. There is a setting called MAX RAM requency or same meaning setting in the BIOS . by default this gonna be Auto . what this means is that get the Posible Speed that awailable. so some Motherboard like Gigabyte 945 when we set this to default it get the Fail safe posible Mimium value for the Ram . so urs is 400MH. try to set this setting to diferent value and see if it indicate ur original value.

 

[skybirb]

Yeah u will defiantly get 800 one but the cause is this

1, Bandwidth mean the possible strength of the data can travel between given two points. so this is where FSB came from. FSB means how much strength the data can pass from CPU to RAM and Visa verse . so even ur RAM is 800 MH but the Total FSB is 400MH

2. There is a setting called MAX RAM requency or same meaning setting in the BIOS . by default this gonna be Auto . what this means is that get the Posible Speed that awailable. so some Motherboard like Gigabyte 945 when we set this to default it get the Fail safe posible Mimium value for the Ram . so urs is 400MH. try to set this setting to diferent value and see if it indicate ur original value.

Motherboard eka Foxconn M7PMX-K

Bios walin karanna puluwan hemadeyakma kala thama ehemamai pennanne.

 

[skybirb]

....

 

[Faulkner]

....

This is called Bus Speed (Some times refer Clock Speed)
Okay I think your Motherboard's Maximum Supported Bus speed is 400Mhz
so then you have to change either your motherboard or RAM unless system may be slow down soon.!


PA: Mageth Mobitel eke Credit Limit eka Pannala .!! !! but still has not been disconnected .!!!!!!!!!