Hi,
WARNING IF YOU ARE NOT CONFIDENT IN DOING THIS GUIDE OR BEING ABLE TO REVERSE IT THEN DO NOT ATTEMPT THIS GUIDE! YOU HAVE BEEN WARNED!!!
YES THIS WILL INVALIDATE YOUR WARRENTY! .. ANY KIND OF MODDING WILL INVALIDATE IT TOO!
First of all u need These Things ,
*Phone XS++
*Main Firmware & Filesystem of K810i(The Latest Main firmware+Filesystem )(There Is a VKP File in The zip, delete that ...no need of that
Install The Phone XS++ & Connect The Phone (start turn the phone off remove the memory card and take out the battery for a few seconds ... then replace the battery and connect your USB CABLE first to the phone whilst holding the "C" key down then connect it to your USB PORT (still holding the "C" key!))
1.Flashing The FileSystem(FS)(K810_R8BA024_FS_EUROPE_2_RED52)
Choose The FBN File & Hit Flash
Disconnect The USB Cable & Remove the Battery & reinsert It (Don't Turn On The phone )
2.Flash Customize File System
Select Ur CDA & Region
Disconnect The USB Cable & Remove the Battery & reinsert It (Don't Turn On The phone )
3.Flash The Main Firmware(K810_R8BA024_MAIN_GENERIC_SM_RED52)
Choose The MBN file & Hit Flash
Disconnect The USB Cable & Remove the Battery & reinsert It (Turn On The Phone & Wait to Read>>Please Wait )
Again Turn Off the Phone
4.Then Put Light Effects(Click Extract Here,I Maked own_custpack/TPA/Present/System/lighteffect)
Remove The Battery & Reinsert It & Turn On The Phone
Now Enjoy Ur New Sony Ericsson k810i
Tnx Kobrakaan For The Links & Quotations
Comments Are Welcome
Thenura
WARNING IF YOU ARE NOT CONFIDENT IN DOING THIS GUIDE OR BEING ABLE TO REVERSE IT THEN DO NOT ATTEMPT THIS GUIDE! YOU HAVE BEEN WARNED!!!
YES THIS WILL INVALIDATE YOUR WARRENTY! .. ANY KIND OF MODDING WILL INVALIDATE IT TOO!
First of all u need These Things ,
*Phone XS++
*Main Firmware & Filesystem of K810i(The Latest Main firmware+Filesystem )(There Is a VKP File in The zip, delete that ...no need of that

Install The Phone XS++ & Connect The Phone (start turn the phone off remove the memory card and take out the battery for a few seconds ... then replace the battery and connect your USB CABLE first to the phone whilst holding the "C" key down then connect it to your USB PORT (still holding the "C" key!))
1.Flashing The FileSystem(FS)(K810_R8BA024_FS_EUROPE_2_RED52)
Choose The FBN File & Hit Flash
Disconnect The USB Cable & Remove the Battery & reinsert It (Don't Turn On The phone )
2.Flash Customize File System
Select Ur CDA & Region
Disconnect The USB Cable & Remove the Battery & reinsert It (Don't Turn On The phone )
3.Flash The Main Firmware(K810_R8BA024_MAIN_GENERIC_SM_RED52)
Choose The MBN file & Hit Flash
Disconnect The USB Cable & Remove the Battery & reinsert It (Turn On The Phone & Wait to Read>>Please Wait )
Again Turn Off the Phone
4.Then Put Light Effects(Click Extract Here,I Maked own_custpack/TPA/Present/System/lighteffect)
Remove The Battery & Reinsert It & Turn On The Phone
Now Enjoy Ur New Sony Ericsson k810i
Tnx Kobrakaan For The Links & Quotations

Comments Are Welcome

Thenura
Last edited:



