Latest ads
-
Gemini AI PRO 18 months Offer- Hawaka
- Updated:
-
koko account
- DasunEranga
- Updated:
-
koko account
- DasunEranga
- Updated:
WiFi oneee kooo Help
- Thread starter Rangau2
- Start date
lap eke wifi on karapan ethakota thamun wifi area ekaka innawanam indicate wenawa task bar eka dakunu pethtthe.
ethakota eka click karala connect karapan un-secured connection ekak nam awlak ne kelinma connect wenawa
But, secured ekak nam uben key ekak illai uba key eka denagena inna ona.
key eka enter karata passe connect wei.
Samahara wifi connection wala proxy settings hadanna wei ethakota web browser eke settings walata gihin proxy ekai ip ekai dennna. ewa api denagena inna ona.
ethakota eka click karala connect karapan un-secured connection ekak nam awlak ne kelinma connect wenawa
But, secured ekak nam uben key ekak illai uba key eka denagena inna ona.
key eka enter karata passe connect wei.
Samahara wifi connection wala proxy settings hadanna wei ethakota web browser eke settings walata gihin proxy ekai ip ekai dennna. ewa api denagena inna ona.
thanxx machan lap dekama man gawa thiyenna meke wifiset karaganna therenne ne ban den mata
ad hoc connection ekak hadaganna
We configure both the computers as given below,
PC1:
1. Just right-click “My Computer” and click Properties.
2. Select the “Computer Name” tab and click the “Change” button.
3. Change the computer name to whatever you want, here we name it PC1. Change the workgroup to WG. (The workgroup name should be the same in both computers)
4. Click OK.
Go to Start > My Computer > My Network Places > Network Connections.
Right click on your wireless adapter and select Properties. Go to the Wireless Network Tab and click on the Advanced button. Select Computer to Computer (Ad hoc) networking option.
If you get a window with an SSID box, you can specify the network name in it, in our example we use XNET.
Now go to your Wireless Adapter >> Properties >> Wireless Networks and click Add Preferred Networks.
Enter the settings as follows:
Network name (SSID) : XNET
Network Authentication : Open
Data Encryption : Disabled
Also, do tick the – This is a computer-to-computer (ad hoc) network, wireless access points are not used option if it isn’t already done.
To automatically connect to the network, select the Connection tab and tick on the Connect automatically when in range option.
Now, to configure the TCP/IP connection settings,
1. Goto “Control Panel” >> “Network connections”
2. Right-click on your Wireless Adapter and click “Properties”. In the “General” tab, select “Internet Protocol (TCP/IP)”. Click the “Properties” button.
3. Set the Values
IP Address – 192.168.0.1
Subnet Mask – 255.255.255.0
Default Gateway – 192.168.0.2
4. Click OK and you are done for PC1.
PC2:
1. Just right-click “My Computer” and click Properties.
2. Select the “Computer Name” tab and click the “Change” button.
3. Change the computer name to PC2. Change the workgroup to WG. (The workgroup name should be the same in both computers)
4. Click OK.
Go to Start > My Computer > My Network Places > Network Connections.
Right click on your wireless adapter and select Properties. Go to the Wireless Network Tab and click on the Advanced button. Select Computer to Computer (Ad hoc) networking option.
If you get a window with an SSID box, you can specify the network name in it, in our example we use XNET.
Now go to your Wireless Adapter >> Properties >> Wireless Networks and click Add Preferred Networks.
Enter the settings as follows:
Network name (SSID) : XNET
Network Authentication : Open
Data Encryption : Disabled
Also, do tick the – This is a computer-to-computer (ad hoc) network, wireless access points are not used option if it isn’t already done.
To automatically connect to the network, select the Connection tab and tick on the Connect automatically when in range option.
Now, to configure the TCP/IP connection settings,
1. Goto “Control Panel” >> “Network connections”
2. Right-click on your Wireless Adapter and click “Properties”. In the “General” tab, select “Internet Protocol (TCP/IP)”. Click the “Properties” button.
3. Set the Values
IP Address – 192.168.0.2
Subnet Mask – 255.255.255.0
Default Gateway – 192.168.0.1
4. Click OK and you are all set with PC2 as well.
You are almost done now.
We configure both the computers as given below,
PC1:
1. Just right-click “My Computer” and click Properties.
2. Select the “Computer Name” tab and click the “Change” button.
3. Change the computer name to whatever you want, here we name it PC1. Change the workgroup to WG. (The workgroup name should be the same in both computers)
4. Click OK.
Go to Start > My Computer > My Network Places > Network Connections.
Right click on your wireless adapter and select Properties. Go to the Wireless Network Tab and click on the Advanced button. Select Computer to Computer (Ad hoc) networking option.
If you get a window with an SSID box, you can specify the network name in it, in our example we use XNET.
Now go to your Wireless Adapter >> Properties >> Wireless Networks and click Add Preferred Networks.
Enter the settings as follows:
Network name (SSID) : XNET
Network Authentication : Open
Data Encryption : Disabled
Also, do tick the – This is a computer-to-computer (ad hoc) network, wireless access points are not used option if it isn’t already done.
To automatically connect to the network, select the Connection tab and tick on the Connect automatically when in range option.
Now, to configure the TCP/IP connection settings,
1. Goto “Control Panel” >> “Network connections”
2. Right-click on your Wireless Adapter and click “Properties”. In the “General” tab, select “Internet Protocol (TCP/IP)”. Click the “Properties” button.
3. Set the Values
IP Address – 192.168.0.1
Subnet Mask – 255.255.255.0
Default Gateway – 192.168.0.2
4. Click OK and you are done for PC1.
PC2:
1. Just right-click “My Computer” and click Properties.
2. Select the “Computer Name” tab and click the “Change” button.
3. Change the computer name to PC2. Change the workgroup to WG. (The workgroup name should be the same in both computers)
4. Click OK.
Go to Start > My Computer > My Network Places > Network Connections.
Right click on your wireless adapter and select Properties. Go to the Wireless Network Tab and click on the Advanced button. Select Computer to Computer (Ad hoc) networking option.
If you get a window with an SSID box, you can specify the network name in it, in our example we use XNET.
Now go to your Wireless Adapter >> Properties >> Wireless Networks and click Add Preferred Networks.
Enter the settings as follows:
Network name (SSID) : XNET
Network Authentication : Open
Data Encryption : Disabled
Also, do tick the – This is a computer-to-computer (ad hoc) network, wireless access points are not used option if it isn’t already done.
To automatically connect to the network, select the Connection tab and tick on the Connect automatically when in range option.
Now, to configure the TCP/IP connection settings,
1. Goto “Control Panel” >> “Network connections”
2. Right-click on your Wireless Adapter and click “Properties”. In the “General” tab, select “Internet Protocol (TCP/IP)”. Click the “Properties” button.
3. Set the Values
IP Address – 192.168.0.2
Subnet Mask – 255.255.255.0
Default Gateway – 192.168.0.1
4. Click OK and you are all set with PC2 as well.
You are almost done now.
