Yes My Cooler finally Arrived, Kudos to SLmega for their kind service, Guys SLmega actually works.
The cooler Came on a Fancy box (Very Unusual for a German Product lol) as you can see below (All pictures are from X-bit Labs, i dont have my cam with me)
And here is the cooler Unboxed
The cooler comes with Silmore Silicone Based Thermal compound, Installation was not easy i must say, the push pins are very hard to install on this one (This means the cooler provides a lot of pressure which is a good thing) and installing the fan after u install the cooler is even more tedious. I must give u a warning tho the Fins of the cooler are extremely sharp, so watch ur hands, but the final results are god send, the temp drop from my Previous cooler is about 20C and i was able to OC my CPU to 3.6Ghz on 1.5V vCore..but the voltage is not safe so i sttled with very comfy 3504Mhz clock @ 1.424 Volts. and below are the results.
For Intel Burn test freaks..this is 10 rounds in Linpack, note that its only about 10C higher than OCCT temps not 20C as stated on the Intel Burn test read me, this is what happens with very good coolers
All of these were taken place with the blazing hot Ambient temp of abt 30 - 33C at times :O
9+ Hours in OCCT on CPU stress mode, OCCT can hardly heat this Cooler up,
Super Pi 1M
There u go folks..if you have 8K to spare you cant get anything better than this cooler, @ 3.5Ghz 1.424 Vcore the stock intel cooler will instantly heat my CPU to T-Junction max within seconds under prime 95. This cooler is real winner and u cant buy anything that even comes close to this coolers performance from SL market.
The cooler Came on a Fancy box (Very Unusual for a German Product lol) as you can see below (All pictures are from X-bit Labs, i dont have my cam with me)
And here is the cooler Unboxed
The cooler comes with Silmore Silicone Based Thermal compound, Installation was not easy i must say, the push pins are very hard to install on this one (This means the cooler provides a lot of pressure which is a good thing) and installing the fan after u install the cooler is even more tedious. I must give u a warning tho the Fins of the cooler are extremely sharp, so watch ur hands, but the final results are god send, the temp drop from my Previous cooler is about 20C and i was able to OC my CPU to 3.6Ghz on 1.5V vCore..but the voltage is not safe so i sttled with very comfy 3504Mhz clock @ 1.424 Volts. and below are the results.
For Intel Burn test freaks..this is 10 rounds in Linpack, note that its only about 10C higher than OCCT temps not 20C as stated on the Intel Burn test read me, this is what happens with very good coolers
All of these were taken place with the blazing hot Ambient temp of abt 30 - 33C at times :O
9+ Hours in OCCT on CPU stress mode, OCCT can hardly heat this Cooler up,
Super Pi 1M
There u go folks..if you have 8K to spare you cant get anything better than this cooler, @ 3.5Ghz 1.424 Vcore the stock intel cooler will instantly heat my CPU to T-Junction max within seconds under prime 95. This cooler is real winner and u cant buy anything that even comes close to this coolers performance from SL market.
didnt get u?? 
