xperia u help

asanka99

Well-known member
  • Apr 3, 2009
    2,209
    110
    63
    Gampaha
    Xperiya u phone eke Version eka 6.0.B.3.184

    but net eke Latest available software: 6.1.1.B.1.10
    http://www.sonymobile.com/global-en/software/phones/xperia-u/

    update karanna giyama " you have latest software "

    mekata hlp ekak denna

    machan country eka anuwa wenas wenawa mama hithanne. thawa tika dawasakin karanna puluwan wei.

    mage xperia s eketh ehemai
    xxxxx.45 mage thiyenne,eth update ekak thiyanawa xxxxxx.50 anemanda machan.
     

    Gamerneeds

    Member
    Dec 21, 2008
    308
    19
    0
    Xperia U Manual Firmware Update

    Please make sure to backup any important files before proceeding.

    1. Download Firmware (Latest) - ST25i / ST25a
    2. Download and Install Flashtool
    3. Install Flashtool Drivers. Setup is in \Flashtool\drivers.
    4. Copy the firmware file (.ftf) to the Firmwares folder (Usually C:\Flashtool\Firmwares)
    5. Launch Flashtool and select the icon:

    But.png


    6. Select Flashmode and then choose the firmware to flash.
    7. Press OK, and follow instructions.
    8. Flashing will start, if it doesn't - try again from Step 5.
     
    Last edited:
    • Like
    Reactions: poddo

    Gamerneeds

    Member
    Dec 21, 2008
    308
    19
    0
    Xperia S Manual Firmware Update

    Please make sure to backup any important files before proceeding.

    1. Download Firmware
    2. Download and Install Flashtool
    3. Install Flashtool Drivers. Setup is in \Flashtool\drivers.
    4. Copy the firmware file (.ftf) to the Firmwares folder (Usually C:\Flashtool\Firmwares)
    5. Launch Flashtool and select the icon:

    But.png


    6. Select Flashmode and then choose the firmware to flash. Excluding baseband is not needed.
    7. Press OK, and follow instructions.
    8. Flashing will start, if it doesn't - try again from Step 5.
     
    Last edited:

    poddo

    Member
    Oct 24, 2010
    208
    8
    0
    Xperia U Manual Firmware Update

    Please make sure to backup any important files before proceeding.

    1. Download Firmware (Latest) - Mirror 1 or Mirror 2
    2. Download and Install Flashtool
    3. Install Flashtool Drivers. Setup is in \Flashtool\drivers.
    4. Copy the firmware file (.ftf) to the Firmwares folder (Usually C:\Flashtool\Firmwares)
    5. Launch Flashtool and select the icon:

    But.png


    6. Select Flashmode and then choose the firmware to flash.
    7. Make sure you tick to exclude Baseband. See image below.

    2rrqwxy.png


    8. Press OK, and follow instructions.
    9. Flashing will start, if it doesn't - try again from Step 5.

    TNX.. Macho.......
    meka sure neda