ADSL Help SNR & Errors

Voltage · Aug 21, 2016

මචන්ලා මේ ADSL stats ටික බලල කියපන්කෝ මේක අවුල්ද නැද්ද කියල

Downstream Upstream
SNR Margin (0.1dB): 100 128
Attenuation (0.1dB): 305 180
Output Power (dBm): 19.0 11.5

idle ඉන්නකොට අවුලක් නැ. Connection එක පාවිච්චි කරනකොට මාර විදියට packets drop වෙනවනේ ... මං SLT handoff point එකේ ඉදල තියෙන cables ඔක්කොමත් අලුතෙන් දැම්මා. ඒත් එහෙමමයි නේ බන්..

Reply from 8.8.8.8: bytes=32 time=157ms TTL=45
Reply from 8.8.8.8: bytes=32 time=153ms TTL=45
Reply from 8.8.8.8: bytes=32 time=153ms TTL=45
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45
Request timed out.
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45
Reply from 8.8.8.8: bytes=32 time=153ms TTL=45
Request timed out.
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45
Reply from 8.8.8.8: bytes=32 time=156ms TTL=45
Request timed out.
Reply from 8.8.8.8: bytes=32 time=153ms TTL=45
Reply from 8.8.8.8: bytes=32 time=153ms TTL=45
Reply from 8.8.8.8: bytes=32 time=153ms TTL=45
Reply from 8.8.8.8: bytes=32 time=153ms TTL=45
Request timed out.
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45
Reply from 8.8.8.8: bytes=32 time=153ms TTL=45
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45
Reply from 8.8.8.8: bytes=32 time=153ms TTL=45
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45
Request timed out.
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45
Reply from 8.8.8.8: bytes=32 time=153ms TTL=45
Reply from 8.8.8.8: bytes=32 time=153ms TTL=45
Request timed out.
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45
Reply from 8.8.8.8: bytes=32 time=153ms TTL=45
Reply from 8.8.8.8: bytes=32 time=156ms TTL=45
Request timed out.
Request timed out.
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45
Request timed out.
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45

මේ දැනට error count එක (router එක on කරල තත්පර 801 කට තමයි මේ)
downstream upstream
HEC Errors: 443 0
OCD Errors: 0 0
LCD Errors: 0 0
CRC Errors: 35 0
FEC Errors: 112 0

Total ES 16 0

king_pandukabaya · Aug 21, 2016

lahirufx+ · Aug 21, 2016

slt adsl bump

රෝසි ආච්චි · Aug 21, 2016

snr eka 10.0 / 12.8 neh

madine ban

Aki992 · Aug 21, 2016

ow bn mageth enne snr eka 6.0 wage

drop wenawa iwarayykk na. hmm

ryanex · Aug 21, 2016

10db downstream madi ban attainable rate kohomada ?

Voltage · Aug 21, 2016

ryanex said:
10db downstream madi ban attainable rate kohomada ?

Attainable rates නම් එච්චරම අවුලක් නැ බන්

down up
SNR Margin (0.1dB): 122 126
Attenuation (0.1dB): 305 180
Output Power (dBm): 19.0 12.0
Attainable Rate (Kbps): 22808 1235
Rate (Kbps): 17407 1023
D (interleave depth): 1 1

Silly point · Aug 21, 2016

loops dala wadi ban ekai case eke.. SLT wala puduma wenna deyak na.. nikan hithahanko public ip ekak kochchara ports kadanawa athida kiyala

msurangag · Aug 21, 2016

මේක මගේ ඩ්‍රොප් වීමක් නම් නැහැ.ඔයාගේ නම් snr එක මදි හොදටම

Kudnadun · Aug 22, 2016

මගේ පරණ Note එකක්..

Code:

Signal-to-noise ratio (SNR) is defined as the power ratio between a signal (meaningful information) and the background noise (unwanted signal)

SNR = signal / noise

6dB or below SNR is bad, you will experience no sync, or intermittent sync problems
7dB-10dB is fair but does not leave much room for variation in conditions
11dB-20dB is good with little or no sync problems (if no large variation)
20dB-28dB is excellent
29dB or above is outstanding

Line attenuation is a measure of how much the signal has degraded between the DSLAM and the modem.
This is largely a function of the distance from the exchange.
The lower the dB, the better for this measurement.
Attenuation is logarithmic and each 3dB of attenuation halves the strength of the signal power received.

20dB and below is outstanding
20dB-30dB is excellent
30dB-40dB is very good
40dB-50dB is good
50dB-60dB is poor and may experience connectivity issues
60dB or above is bad and will experience connectivity issues

ඔය ගෙදර SLT connection එක..
ඕක නම් ඩ්‍රොප් වෙන්නේ එහෙමත් වෙලාවක තමා..

රෝසි ආච්චි · Aug 22, 2016

Kudnadun said:

මගේ පරණ Note එකක්..

Code:

Signal-to-noise ratio (SNR) is defined as the power ratio between a signal (meaningful information) and the background noise (unwanted signal)

SNR = signal / noise

6dB or below SNR is bad, you will experience no sync, or intermittent sync problems
7dB-10dB is fair but does not leave much room for variation in conditions
11dB-20dB is good with little or no sync problems (if no large variation)
20dB-28dB is excellent
29dB or above is outstanding

Line attenuation is a measure of how much the signal has degraded between the DSLAM and the modem.
This is largely a function of the distance from the exchange.
The lower the dB, the better for this measurement.
Attenuation is logarithmic and each 3dB of attenuation halves the strength of the signal power received.

20dB and below is outstanding
20dB-30dB is excellent
30dB-40dB is very good
40dB-50dB is good
50dB-60dB is poor and may experience connectivity issues
60dB or above is bad and will experience connectivity issues

ඔය ගෙදර SLT connection එක..
ඕක නම් ඩ්‍රොප් වෙන්නේ එහෙමත් වෙලාවක තමා..

meke yako speed eka 1mb ne :lol:

ekai ochchara snr wadi

MalindhaDR · Aug 22, 2016

මගෙත් ඉස්සර සෑහෙන්න ඩ්‍රොප් උනා මචන්
පස්සෙ උන්ට කිව්වම උන් ඇවිත් චෙක් කරලා බලලා තඹ කූරක් බැස්සුවා අපේ වත්ත ඇතුලෙන්, ඒක පෝන් එකේ අර්ත් එකට දැම්මට පස්සෙ ඩ්‍රොප් වෙන එක නතරම උනා
උඹත් උන්ට කියලා බලපන්, උන් ඇවිත් මොනා හරි කරයි

Identity · Aug 22, 2016

උඹත් කූරක් බස්සගනින්

msurangag · Aug 22, 2016

MalindhaDR said:
මගෙත් ඉස්සර සෑහෙන්න ඩ්‍රොප් උනා මචන්
පස්සෙ උන්ට කිව්වම උන් ඇවිත් චෙක් කරලා බලලා තඹ කූරක් බැස්සුවා අපේ වත්ත ඇතුලෙන්, ඒක පෝන් එකේ අර්ත් එකට දැම්මට පස්සෙ ඩ්‍රොප් වෙන එක නතරම උනා
උඹත් උන්ට කියලා බලපන්, උන් ඇවිත් මොනා හරි කරයි

එහෙම සීන් එකක් තියේද ?
එකෙන් snr එකට බලපෑමක් තියේද ?
අපේ නම් ගෙවල් ලග MSAN එකක් ගැහුවා .ඊට පස්සේ වැඩේ ගොඩ

sumrath1998 · Aug 22, 2016

Voltage said:
මචන්ලා මේ ADSL stats ටික බලල කියපන්කෝ මේක අවුල්ද නැද්ද කියල

Downstream Upstream
SNR Margin (0.1dB): 100 128
Attenuation (0.1dB): 305 180
Output Power (dBm): 19.0 11.5

idle ඉන්නකොට අවුලක් නැ. Connection එක පාවිච්චි කරනකොට මාර විදියට packets drop වෙනවනේ ... මං SLT handoff point එකේ ඉදල තියෙන cables ඔක්කොමත් අලුතෙන් දැම්මා. ඒත් එහෙමමයි නේ බන්..

Reply from 8.8.8.8: bytes=32 time=157ms TTL=45
Reply from 8.8.8.8: bytes=32 time=153ms TTL=45
Reply from 8.8.8.8: bytes=32 time=153ms TTL=45
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45
Request timed out.
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45
Reply from 8.8.8.8: bytes=32 time=153ms TTL=45
Request timed out.
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45
Reply from 8.8.8.8: bytes=32 time=156ms TTL=45
Request timed out.
Reply from 8.8.8.8: bytes=32 time=153ms TTL=45
Reply from 8.8.8.8: bytes=32 time=153ms TTL=45
Reply from 8.8.8.8: bytes=32 time=153ms TTL=45
Reply from 8.8.8.8: bytes=32 time=153ms TTL=45
Request timed out.
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45
Reply from 8.8.8.8: bytes=32 time=153ms TTL=45
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45
Reply from 8.8.8.8: bytes=32 time=153ms TTL=45
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45
Request timed out.
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45
Reply from 8.8.8.8: bytes=32 time=153ms TTL=45
Reply from 8.8.8.8: bytes=32 time=153ms TTL=45
Request timed out.
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45
Reply from 8.8.8.8: bytes=32 time=153ms TTL=45
Reply from 8.8.8.8: bytes=32 time=156ms TTL=45
Request timed out.
Request timed out.
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45
Request timed out.
Reply from 8.8.8.8: bytes=32 time=154ms TTL=45

මේ දැනට error count එක (router එක on කරල තත්පර 801 කට තමයි මේ)
downstream upstream
HEC Errors: 443 0
OCD Errors: 0 0
LCD Errors: 0 0
CRC Errors: 35 0
FEC Errors: 112 0

Total ES 16 0

Interference tiyenawa wage. Sarungal yawana ewun telephone wire wala nul patalawala wires kapuwamath oka wenna puluwan. SLT wires expose wunama oxide bandila drop wenna gannawa.

Handoff point eken 2m wage cable ekak mdem ekata direct gahala, stats test karala balala SLT katha karapan. Un awith oka hadanawa.

MalindhaDR · Aug 22, 2016

msurangag said:
එහෙම සීන් එකක් තියේද ?
එකෙන් snr එකට බලපෑමක් තියේද ?
අපේ නම් ගෙවල් ලග MSAN එකක් ගැහුවා .ඊට පස්සේ වැඩේ ගොඩ

උන් නම් කිව්වෙ ඒක තමා සීන් එක කියලා

Search

Latest ads

ADSL Help SNR & Errors

Voltage

Well-known member

king_pandukabaya

Well-known member

lahirufx+

Well-known member

රෝසි ආච්චි

Well-known member

Aki992

Well-known member

ryanex

Well-known member

Voltage

Well-known member

Silly point

Well-known member

msurangag

Member

Kudnadun

Well-known member

රෝසි ආච්චි

Well-known member

MalindhaDR

Member

Identity

Well-known member

msurangag

Member

sumrath1998

Junior member

MalindhaDR

Member

Similar threads