Anaroid waddoo

[prasannaf]

machoo mage sony ericson tipo eke software kela wela
sony kiyala watila phn eka off wenawa aye mekata software eka daganna hati kiyala dipankoo

 

[prasannaf]

cmw recover eke tibba backup ekath na bunzzz

 

[san1020]

bump thama machan

 

[Dr. NAC]

Xperia Tipo or Tipo Dual?

 

[ethanusha]

උබ custom rom එකක් ද පාවිච්චි කරන්නේ ?

 

[Dr. NAC]

XPERIA TIPO GENERIC 11.0.A.4.22

XPERIA TIPO DUAL GENERIC 11.0.A.1.12

ඔය දෙකෙන් උඹට හරියන එක බාගෙන flashtool එකෙන් flash කරපන්.
මෙන්න flashtool එක.

 

[prasannaf]

XPERIA TIPO GENERIC 11.0.A.4.22

XPERIA TIPO DUAL GENERIC 11.0.A.1.12

ඔය දෙකෙන් උඹට හරියන එක බාගෙන flashtool එකෙන් flash කරපන්.
මෙන්න flashtool එක.

oka karanne kohomada machan

 

[Dr. NAC]

oka karanne kohomada machan

http://forum.xda-developers.com/showthread.php?p=10879507

Download the latest version of Flashtool from here: http://androxyde.github.com/Flashtool/ thanks to Androxyde & Bin4ry

Install flashtool drivers in C:\Flashtool\drivers (Both Flash mode and fastboot for your device model.)

The first and most important thing is to be sure that Flashtool recognizes your phone:

• Start Flashtool
• Connect the phone with the computer via USB cabel
• Wait till flashtool shows that your device is recognized. You will see your phone model on "Connected device:"

If you see in “Connected device” the name of your phone model you are good to go for next steps.

• Download SE firmware in *.ftf file format and put it in C:\Flashtool\firmwares folder

• Start Flashtool and click the First icon: the "Lightning" icon [Flash]
• Choose the required firmware from the list (if you have more than one ftf file in /firmwares folder you will see all of them in the list)

• Click the OK button
• the following screen will pop-up

1. Unplug the USB cabel from the phone (you can leave it plugged in the PC)
2. Turn off the phone
3. Press and hold the "Back" button on the phone (If no hardware back button, then press volume down)
4. Plug in the USB cabel in the phone
5. Release the "Back" button after the above screen disappers

• A flashing procedure will start...

• Wait till Flashtool finishes flashing
• The program will prompt you to power on your phone
  

• Congratulations! You just flashed your phone successfuly.