dongle ගැන දන්නා අය help

[ස්පයිඩර් මැන්]

Options --->Connection---->Select RAS(Modem)

 

[MILLION$]

error eka hatiyata dongle eke newei sim case ekak wage. eth eka sim ekak wath wada natthan dongle eka reconfigure karanda wenawa. Issallama Putty SSH kiyala software ekak thiyanawa eka download karala install karapn. ita passe device manager ekata gihilla "Ports(COM & LPT)" kiyana eke yata ube dongle eka tiyanawada balapan. tibboth eke properties-> port settings gihilla list eken COM1 select karala OK karapan. ita passe Putty SSH Client eka open karala Serial select karala OPEN karapan. command prompt eka wage ekak open wei. eke "AT^U2DIAG=0" gahala enter press karapn( without quotes ). Ita kalin aniwaren dongle eke software eka install karapan. oya command eken dongle eke fake CD ROM ekai SD Card reader ekai off wenawa. ekalla dongle eka galawala gahala balapan. Dongle eka gattha kiyala machine eken pennane nathi wei eth mobile broadband/ partner eken pennai. connect karala balapn lede hariyai.
e wade hari giye natthan kalin steps tikama karala me command eka gahala balapan "AT^SYSCFG=13,1,3FFFFFFF,2,4". oken 2G signals witharai dongle eka ganne. eth hariyanne natthan meka gahapan "AT^SYSCFG=14,2,3FFFFFFF,2,4". oken 3G only mode ekata watenawa.

SOME USEFUL AT COMMANDS
AT^U2DIAG=0 – Turn off Fake CD and SD Card. (this is good for routers)
AT^U2DIAG=256 – Turn off Fake CD (the application software installs from this)
AT^U2DIAG=268 – Return to normal (or turns off the 3G modem)
AT^U2DIAG=276 – Factory reset
AT^SYSCFG=14,2,3FFFFFFF,2,4 - 3G preferred
ATZ - reset modem configuration

 

[Dumbledore]

"Connection Terminated" matath meka vela thiyenne.... thama visadumak hoyaganna baruva inne. Dialog/ Etisalat Sim 2k use karala chk kala... problem eka thiyenne desktop eke vitarai, lap ekata sim 2ma vada karanava....

 

[95217]

"Connection Terminated" matath meka vela thiyenne.... thama visadumak hoyaganna baruva inne. Dialog/ Etisalat Sim 2k use karala chk kala... problem eka thiyenne desktop eke vitarai, lap ekata sim 2ma vada karanava....

error eka hatiyata dongle eke newei sim case ekak wage. eth eka sim ekak wath wada natthan dongle eka reconfigure karanda wenawa. Issallama Putty SSH kiyala software ekak thiyanawa eka download karala install karapn. ita passe device manager ekata gihilla "Ports(COM & LPT)" kiyana eke yata ube dongle eka tiyanawada balapan. tibboth eke properties-> port settings gihilla list eken COM1 select karala OK karapan. ita passe Putty SSH Client eka open karala Serial select karala OPEN karapan. command prompt eka wage ekak open wei. eke "AT^U2DIAG=0" gahala enter press karapn( without quotes ). Ita kalin aniwaren dongle eke software eka install karapan. oya command eken dongle eke fake CD ROM ekai SD Card reader ekai off wenawa. ekalla dongle eka galawala gahala balapan. Dongle eka gattha kiyala machine eken pennane nathi wei eth mobile broadband/ partner eken pennai. connect karala balapn lede hariyai.
e wade hari giye natthan kalin steps tikama karala me command eka gahala balapan "AT^SYSCFG=13,1,3FFFFFFF,2,4". oken 2G signals witharai dongle eka ganne. eth hariyanne natthan meka gahapan "AT^SYSCFG=14,2,3FFFFFFF,2,4". oken 3G only mode ekata watenawa.

SOME USEFUL AT COMMANDS
AT^U2DIAG=0 – Turn off Fake CD and SD Card. (this is good for routers)
AT^U2DIAG=256 – Turn off Fake CD (the application software installs from this)
AT^U2DIAG=268 – Return to normal (or turns off the 3G modem)
AT^U2DIAG=276 – Factory reset
AT^SYSCFG=14,2,3FFFFFFF,2,4 - 3G preferred
ATZ - reset modem configuration

thanks mchn මම මේක ට්‍රය් කලa හරි ගියේ නැ ,,ඊට පස්සේ reset කලා

Options --->Connection---->Select RAS(Modem)

කොහෙද මචං ඔහොම එකක් තියන්නේ ?

ඔක මට පෙන්නෙ ඩොන්ගල් එකේ අවුලක් සහෝ මගෙත් පරණ E173 ඔහොම ලෙඩ දුන්නා.E1550 එකක් තිබ්බා ඔහොම එරර් මැසෙජස් ඇවිත් ඇවිත් එක පාරම හිට්ටා,අයෙත් වැඩ කලෙම නැ

 

[clearsky]

usb port wala case walatath ohoma wenawa dongle eka wena usb port walata gahala try karala balanna.

 

[arsehole-froce]

http://www.modemunlock.com/firmwae-upgrade-huawei-modem.html