Elakiri SuperPi 1M Top Times

[Anusha]

WOW! 1.45V. Are u on stock cooling?

 

[samiram]

WOW! 1.45V. Are u on stock cooling?

yup..
But i have to remove the cover...
Stable until CPU heat reaches 70....

 

[Anusha]

yup..
But i have to remove the cover...
Stable until CPU heat reaches 70....

So it's not a stable overclock?

 

[samiram]

So it's not a stable overclock?

System was unstable only for once..
After that it works for about 8 hours strait..
But cant be sure...
Have to do more stress tests..
And have to fix a proper cooling system..

 

[zCexVe]

My Intel mobo got raped.

My RAMS too. Now they cant go to DDR500. :-[

 

[zCexVe]

yup..
But i have to remove the cover...
Stable until CPU heat reaches 70....

Cover means side panel??If u remove it temp will go more high coz the cooling plan gets screwed.

 

[zCexVe]

System was unstable only for once..
After that it works for about 8 hours strait..
But cant be sure...
Have to do more stress tests..
And have to fix a proper cooling system..

8800GTS ekath ekka stress test karal ivara veddi current bill eka 2500 pani.

 

[Anusha]

System was unstable only for once..
After that it works for about 8 hours strait..
But cant be sure...
Have to do more stress tests..
And have to fix a proper cooling system..

Works for 8 hours straight doesn't mean it's stable. Yes, you have to stress test for 12 hours with Prime 95 and Orthos.

 

[samiram]

8800GTS ekath ekka stress test karal ivara veddi current bill eka 2500 pani.

2500 kalith na..

 

[samiram]

Cover means side panel??If u remove it temp will go more high coz the cooling plan gets screwed.

hehe..
I have a stock cooling system machan..
Removing the panel works for me....
Have to put some fans before doing more OCing..

 

[samiram]

Works for 8 hours straight doesn't mean it's stable. Yes, you have to stress test for 12 hours with Prime 95 and Orthos.

yeah..
I am using the Stability test in the Nvidia control panel...
Is it good..?

 

[zCexVe]

hehe..
I have a stock cooling system machan..
Removing the panel works for me....
Have to put some fans before doing more OCing..

Sure da macho?I've tested it with some old PC.And usually We are taught to cover all the panels for proper cooling.As I researched the best is side+front Intake and Top + back outtake (Where PSU does the top outing)with a negative air pressure.20CFM more negative P. will do.But hav to clean the dust though.
I run stock cooling for all.

 

[zCexVe]

2500 kalith na..

mata hithuna

 

[zCexVe]

yeah..
I am using the Stability test in the Nvidia control panel...
Is it good..?

I usually recommend 3rd party for them.Coz the compnies usually doesnt allow for harder OCes.ASUS parts are usually factory OCed to show more performance so they allow but they give software tools with the parts.

 

[samiram]

Sure da macho?I've tested it with some old PC.And usually We are taught to cover all the panels for proper cooling.As I researched the best is side+front Intake and Top + back outtake (Where PSU does the top outing)with a negative air pressure.20CFM more negative P. will do.But hav to clean the dust though.
I run stock cooling for all.

amboo..

all i know is when i remove the cover..
the cpu heat will get little bit lower....
and stays between 65 and 70..
I don't know anything about my casing's ventilation system..

 

[samiram]

I usually recommend 3rd party for them.Coz the compnies usually doesnt allow for harder OCes.ASUS parts are usually factory OCed to show more performance so they allow but they give software tools with the parts.

hmm..
i didn't know that..

 

[zCexVe]

amboo..

all i know is when i remove the cover..
the cpu heat will get little bit lower....
and stays between 65 and 70..
I don't know anything about my casing's ventilation system..

bayavenna epa.LOL.
hari lesiy.issellama oyage case fan vala CFM(Cubic Foot per Minute)Values hoyaganna.eta passe outtake=negative,intake=positive vidiyata ganan hadala pressure eka negative vidiyata set karaganna.mama kalin kivva technology ekata.usually side 120mm,back 120mm,front 80mm,psu 120/140mm ne ganne.etakota auto ma negative.eta passe athule circulate vena eva(HDD,RAM,NB,SB,CPU)eva ganata set karanna evaye wind eka yana paththa balala.i.e :- Usually all HDD coolers intake.So place near the front intake.CPUs blow off.Make that wind reach an outtake.

 

[samiram]

bayavenna epa.LOL.
hari lesiy.issellama oyage case fan vala CFM(Cubic Foot per Minute)Values hoyaganna.eta passe outtake=negative,intake=positive vidiyata ganan hadala pressure eka negative vidiyata set karaganna.mama kalin kivva technology ekata.usually side 120mm,back 120mm,front 80mm,psu 120/140mm ne ganne.etakota auto ma negative.eta passe athule circulate vena eva(HDD,RAM,NB,SB,CPU)eva ganata set karanna evaye wind eka yana paththa balala.i.e :- Usually all HDD coolers intake.So place near the front intake.CPUs blow off.Make that wind reach an outtake.

ane machan....
mata Greek wagee..
me nikan fan 4 withara hay kereanna barida..
mata below 70 temp eka tibanam athi..

 

[Anusha]

It is Exhaust vs. Intake

 

[Anusha]

ane machan....
mata Greek wagee..
me nikan fan 4 withara hay kereanna barida..
mata below 70 temp eka tibanam athi..

Eyaa kiyanne Exhaust CFM > Intake CFM kiyala. Samaana unaata kamak nae, Exhaust CFM < Intake CFM unoth nang wedak nae...