How to connect two routers??

[koolbird]

Machan,
Mama use kale D-link 2750U router ekak. Lagadi gedarata peo tv gaththa. Un awith ZTE H108L V4.0 router eka TV eka lagata dala connection dila gihin D-link eka use karanne nethuwa. ZTE router eken netowrk Ethernet cable ekak mage room eke thiyanawa. Mata ona ekata D-link router eka connect karanna. ZTE eken wifi signal strength madi room ekata.

Net search karama router bridge karanna puluwan kiyala thiyanawa. I tried several methods mentioned in internet. But didn't work. Networking danna kenek help ekak dennakooooo
Thank you!!
Bump ekakhari dala sup ekak denna

 

[sasliit]

Bump

 

[The Blacklist]

if your stock firmware can't handle then you may need to flash DD-WRT. but most routers use as a switch


google your problem + DD WRT

 

[mAjIc hAt]

එකකට කනෙක්ට් කරගත්තෙත් දන්න වැඩ ඔක්කොම දාල බං බම්ප් ඒ නිසා​

 

[thinking_guy]

D link eke routing disable karapan. etakota switch ekak widiyata wadakarayi.

 

[noone]

Wireless Bridge karanna
ehema neththan DLINK router ekata settings danna

 

[lahirufx+]

wireless bridge koranna barida...zte eka AP mode eke thiyala D-Link eka repeater mode ekata dala..

 

[nlasasatha]

hari giyoth kiyapan, math karanna gihin hari giye ne

 

[milindasenarath]

 

[MiyuB]

මන් කරලා තියෙනවා dialog 4g එකකුයි තව රවුටර් එහෙකුයි...මන් නම් කලේ dialog lan එකෙන් අවුට්පුට් එකක් දුන්න අනික් රවුටර් එකට..වැඩේ හරි ගියා...උඹ ඒ විදියට කරලා බැලුවද...? ඕකේ කරන්න පුළුවන්ද දන්නේ නැහැ... ​

 

[kellsupun]

bump nowatahe

 

[Kudnadun]

Router 2a ethernet cable 1kin connect karapan..
1ka dhcp server 1a off karanna..
router 2e lan ip address 1ma subnetmask 1e thiyanna..
hope this will help..

 

[jay-shan]

i want to knw too BUMP

 

[koolbird]

if your stock firmware can't handle then you may need to flash DD-WRT. but most routers use as a switch


google your problem + DD WRT

DD WRT kiyanne mokadda ban. Im not from a IT background

D link eke routing disable karapan. etakota switch ekak widiyata wadakarayi.

Terenne ne ban

Wireless Bridge karanna
ehema neththan DLINK router ekata settings danna

Wireless bridge karanne kohomada kiyala thamai ban math ahanne

wireless bridge koranna barida...zte eka AP mode eke thiyala D-Link eka repeater mode ekata dala..

Bridge karana widiya tama ban danne nette

Meka balanna bene ban

මන් කරලා තියෙනවා dialog 4g එකකුයි තව රවුටර් එහෙකුයි...මන් නම් කලේ dialog lan එකෙන් අවුට්පුට් එකක් දුන්න අනික් රවුටර් එකට..වැඩේ හරි ගියා...උඹ ඒ විදියට කරලා බැලුවද...? ඕකේ කරන්න පුළුවන්ද දන්නේ නැහැ... ​

Nikanma output dunnata hariyanne ne wage ban...... settings hadanna thiyenawa. eka tama danne nette.

Router 2a ethernet cable 1kin connect karapan..
1ka dhcp server 1a off karanna..
router 2e lan ip address 1ma subnetmask 1e thiyanna..
hope this will help..

Router 2a ethernet cable 1kin connect karapan.. This is done
1ka dhcp server 1a off karanna.. This is done
router 2e lan ip address 1ma subnetmask 1e thiyanna.. Meka komada karanne

i want to knw too BUMP

 

[koolbird]

Bump

bump

hari giyoth kiyapan, math karanna gihin hari giye ne

bump

bump

bump nowatahe

බුම්ප්

bump

i want to knw too BUMP

Thankz machanla

 

[Leo_D]

meh widiyata try karala mage hari gihin thiyenawa.

Step 1:

Connect a computer to the secondary router (desktop or laptop to one of the Ethernet ports of the second router).

Step 2:
Access the setup page of the secondary router.

Step 3:
Under the Basic Setup sub-tab, look for IP Address or Local IP Address.

NOTE: If the IP address is the same as the main router, change the fourth octet (the number in the fourth box) to a different value.

Example:

Main router: 192.168.1.1 -> Secondary router should be: 192.168.1.2



Step 4:
For the DHCP Server Setting, set the DHCP Server to Disabled.



Step 5:
Click Save Settings.

Step 6:
Unplug the cable from your computer and connect it to one of the Ethernet ports on the main router.

Step 7:
Powercycle the secondary router and once the Power light is solid, you may now check your Internet connection.

 

[koolbird]

meh widiyata try karala mage hari gihin thiyenawa.

Step 1:

Connect a computer to the secondary router (desktop or laptop to one of the Ethernet ports of the second router).

Step 2:
Access the setup page of the secondary router.

Step 3:
Under the Basic Setup sub-tab, look for IP Address or Local IP Address.

NOTE: If the IP address is the same as the main router, change the fourth octet (the number in the fourth box) to a different value.

Example:

Main router: 192.168.1.1 -> Secondary router should be: 192.168.1.2



Step 4:
For the DHCP Server Setting, set the DHCP Server to Disabled.



Step 5:
Click Save Settings.

Step 6:
Unplug the cable from your computer and connect it to one of the Ethernet ports on the main router.

Step 7:
Powercycle the secondary router and once the Power light is solid, you may now check your Internet connection.

Me tika nam kala machan, mita amatarawa tawa instructions wagayak tibuna mama follow kala website eke. eth hari giye nene.
ube routers 2ma ekama brand ekeda??

 

[Kudnadun]

router 2e lan ip address 1ma subnetmask 1e thiyanna.. Meka komada karanne