Is my computer too hot ?

[eyepea]

Am running ubuntu 10.4 on a pentium e5300 cpu.
recently I installed the sensors applet.

It gives approximately

Core0 = 37 C
Core1 = 33 C
fan2 = 2636 RPM
temp1 = 56 C
temp2 = 88 C
temp3 = 127 C

is my comp boiling ?

I checked the bios hardware monitor on boot.
it gave:
cpu temp 84 C
mb temp 27 C

how come core0 and core1 are ok and temp2 (cpu?) is too high? Anyway bios h/w monitor also gives high reading!
Are readings from sensors applet accurate? temp3 ????

if I run sensors in a terminal I get the following:

coretemp-isa-0000
Adapter: ISA adapter
Core 0: +38.0°C (high = +76.0°C, crit = +100.0°C)

coretemp-isa-0001
Adapter: ISA adapter
Core 1: +34.0°C (high = +76.0°C, crit = +100.0°C)

w83627dhg-isa-0290
Adapter: ISA adapter
Vcore: +1.10 V (min = +0.00 V, max = +1.74 V)
in1: +1.64 V (min = +1.37 V, max = +1.95 V)
AVCC: +3.28 V (min = +2.98 V, max = +3.63 V)
VCC: +3.28 V (min = +2.98 V, max = +3.63 V)
in4: +1.87 V (min = +1.63 V, max = +1.74 V) ALARM
in5: +1.26 V (min = +1.06 V, max = +0.71 V) ALARM
in6: +0.10 V (min = +1.95 V, max = +1.08 V) ALARM
3VSB: +3.28 V (min = +2.98 V, max = +3.63 V)
Vbat: +3.22 V (min = +2.70 V, max = +3.30 V)
fan1: 0 RPM (min = 1318 RPM, div = 128) ALARM
fan2: 2678 RPM (min = 922 RPM, div = 8)
fan3: 0 RPM (min = 1054 RPM, div = 128) ALARM
fan4: 0 RPM (min = 10546 RPM, div = 128) ALARM
fan5: 0 RPM (min = 10546 RPM, div = 128) ALARM
temp1: +56.0°C (high = +79.0°C, hyst = -91.0°C) ALARM sensor = diode
temp2: +88.0°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor = diode
temp3: +127.0°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor = thermistor
cpu0_vid: +2.050 V

Assume as step 1, I may need to re-do the thermal compound on the cpu - fan heat sink.

Any other ideas please ?

thanks!

 

[dinukap4]

temp3 = 127 C ??

 

[blood_brotha]

me thinks faulty sensor. but check from bios setup just to be sure

 

[eyepea]

thanks for responding guys.

Well the sensors output temp3 gives just that 127
Am not sure what temp3 indicates.
Think temp1 is MB and temp2 is CPU ?

Rechecked bios on re-boot:
CPU 84
MB 30
There are no other temp readings.
This is a Intel DG31PR board.

Anyway is the bios reported CPU 84 value too high or can manage ?

 

[raveesha000]

machan ube mother board ekak koi welawe hari unu wenewa ban ochara temp. ekak thibboth.

 

[eyepea]

Someone mentioned that I may need a bios update and intel site had some info about bios issue in reporting temp. Didn't find a reference to this yet.

Anyone using a Intel DG31PR mobo heard of such an issue?