Need a help !

[draco]

I need a small help from U guys.

ONLY FROM SLT ADSL 512 Kbps & router users

This is what you all have to do.

Log on to your router ( open your web browser and type 192.168.1.1) > Then go to your ADSL status > Then search for "SNR Margin , "Line Attenuation" and "Data Rate"

plz post them here (No need of screen shots)

This is an example

Note: This Screen shot is taken from the internet and it can be different from your settings.

 

[draco]

ko help neddha ?

 

[¤--bACarDi--¤]

here it is

Statistics -- ADSL
Mode:	ADSL2+ 
Line Coding:	Trellis On 
Status:	No Defect 
Link Power State:	L0 
 
 	Downstream	Upstream
SNR Margin (dB):	30.4 	32.2 
Attenuation (dB):	52.5 	27.7 
Output Power (dBm):	6.9 	13.8 
Attainable Rate (Kbps):	6048 	997 
Rate (Kbps):	512 	124 
MSGc (number of bytes in overhead channel message):	59 	17 
B (number of bytes in Mux Data Frame):	16 	3 
M (number of Mux Data Frames in FEC Data Frame):	1 	1 
T (Mux Data Frames over sync bytes):	1 	3 
R (number of check bytes in FEC Data Frame):	0 	0 
S (ratio of FEC over PMD Data Frame length):	1.0000 	0.9412 
L (number of bits in PMD Data Frame):	136 	34 
D (interleaver depth):	1 	1 
Delay (msec):	0 	0 
 
Super Frames:	1377844 	350762 
Super Frame Errors:	9 	0 
RS Words:	0 	0 
RS Correctable Errors:	0 	0 
RS Uncorrectable Errors:	0 	N/A 
 
HEC Errors:	1 	0 
OCD Errors:	0 	0 
LCD Errors:	0 	0 
Total Cells:	27036598 	3584156600 
Data Cells:	9912575 	3716411382 
Bit Errors:	0 	1344950 
 
Total ES:	8 	28005 
Total SES:	0 	155 
Total UAS:	16 	13626158

out of my business// SNR ratio wut for ?

 

[draco]

here it is

Statistics -- ADSL
Mode:	ADSL2+ 
Line Coding:	Trellis On 
Status:	No Defect 
Link Power State:	L0 
 
 	Downstream	Upstream
SNR Margin (dB):	30.4 	32.2 
Attenuation (dB):	52.5 	27.7 
Output Power (dBm):	6.9 	13.8 
Attainable Rate (Kbps):	6048 	997 
Rate (Kbps):	512 	124 
MSGc (number of bytes in overhead channel message):	59 	17 
B (number of bytes in Mux Data Frame):	16 	3 
M (number of Mux Data Frames in FEC Data Frame):	1 	1 
T (Mux Data Frames over sync bytes):	1 	3 
R (number of check bytes in FEC Data Frame):	0 	0 
S (ratio of FEC over PMD Data Frame length):	1.0000 	0.9412 
L (number of bits in PMD Data Frame):	136 	34 
D (interleaver depth):	1 	1 
Delay (msec):	0 	0 
 
Super Frames:	1377844 	350762 
Super Frame Errors:	9 	0 
RS Words:	0 	0 
RS Correctable Errors:	0 	0 
RS Uncorrectable Errors:	0 	N/A 
 
HEC Errors:	1 	0 
OCD Errors:	0 	0 
LCD Errors:	0 	0 
Total Cells:	27036598 	3584156600 
Data Cells:	9912575 	3716411382 
Bit Errors:	0 	1344950 
 
Total ES:	8 	28005 
Total SES:	0 	155 
Total UAS:	16 	13626158

out of my business// SNR ratio wut for ?

Thanx bro.

One of my friend told me that his SNR margin is low and the data rate is not 512 kbps and 128 kbps. i just wanted 2 knw it happens to all or it's just for him.

 

[draco]

ko anith kattiya neddhaaaaaa ??

 

[TΞΞNSTAR™]

Wish I could help you out. but im using a Modem machanz !!

 

[¤--bACarDi--¤]

Thanx bro.

One of my friend told me that his SNR margin is low and the data rate is not 512 kbps and 128 kbps. i just wanted 2 knw it happens to all or it's just for him.

SNR depends on the quality of service, wires, cables loops & shit
එහා ගෙදර ඇන්ටි ෆොන් කේබල් වල රෙදි වනල නම් SnR is getting fucking high

 

[Dream_Angel]

Sorry machan i don't know

 

[draco]

Wish I could help you out. but im using a Modem machanz !!

It's ok bro. No problem

 

[snoop]

am not in the Sri lanaka.. so sorry bro.

 

[draco]

ko kattiya help neddhaaaa ??

 

[draco]

kauruwath neddhaaaaaa ????????

 

[KeBa]

mokakda seen eka ethin mokada wenne???