Latest ads
-
Handmade Character Soft Toy Bluey Bingo- anil1961
- Updated:
-
Colombo Dahua POE Switch 8 Ports (DH-PFS3010-8ET-65)- hashaz2012
- Updated:
-
Singapore V2Ray VPN for Tunneling
- hu KANNA
- Updated:
-
Dating Website & Online Chat Room- hotvideo
- Updated:
-
DJI Mini 4 Pro Drone Combo Plus- Hawaka
- Updated:
වාසි අවාසි
- Thread starter nineheart
- Start date
eka nam danne ne machan.. mama karapu ekak nam dekala ne.. photo witharay dekala thiyenne...
Wasi Awasinam dan na. Tile allapan machan. dan oka tikak parana nisa. anika oka polish karanda one athi kalen kaleta... 2 x 2 tile lassanai but cost eka wadi.. 16 x 16 allapan. me dawas wala discount ehemath thiyanava ne
Danne naa machan. Mixture eka hariyatama damme nattan wage ewa wenawa athi. Hodama de thamai godak kalin karapu wadak balala contract eka dena eka. Recent ewa balala wadak naa.
මම ඕවා කරන එකෙකෙකුට කතකරා.. පොර කියන්නේ tile අල්ලනවා වගේම concrete දාලා බදාම කපලා ඊට උඩින් උන්ගේ titanium mix එක layer කරලා කපනවා කියල.. පොර නම් lifetime guarantee දෙනවා crack යන්නෙ නෑ කියලා..පොර කිව්වා මට ගල් වැඩ්ලි සිමෙන්ති දෙන්න පොර concrete දාලා බදාම කපලා උගෙ titanium paste එක දාල කපල polish කර්ලා දෙන්නම් Rs.200යි අඩියට.. ඉතින් බන් ටයිල් ඇල්ලුවොත් කොන්ක්රීට් දාල බදාම කපන එක කොහොමත් කරන්න ඕනේ එතකොට 1x1 ටයිල් එකක් 250ක් වෙනවා.. එතකොට තව බාස් කුලිත් එපැයි...
වර්ග අඩි 1000ක බිමක් නම් මේ විදියට කරොත් cement, වැලි ගල් දුන්නොත් ලක්ශ 2යි..
ටයිල් ඇල්ලුවොත් cement, වැලි ගල් දාලා ටයිල් වලට ලක්ශ 2.5ක් ටයිල් අලවන ඒවත් එක්ක ලක්ෂ 3ක්වත් වෙයි.. බාස් කුලිත් යයි තව ලක්ශයක් විතර.. එතකොට 4යි.. අර වගෙ දෙගුනයක් ගිහින්නෙ මචං එතකොට...
Last edited:
shine ekata medenne ne TIka kalayak yaddi Matte finish ekak enawa
Iri Thelenawa, Bas kiyanawanam iri thelenne ne kiyala mama nam danne ne eka
mokada mama as dekata dekala thiyenawa iri theluna ewa
1000sqft Kiyanne Tile 250 2X2
Cost eka 140,000
Bas kuli 50 per sqft 45th karanawa 50,000
Yakado Badama kapanna echchara loku cost ekak yanne ne
concrete karalanam a wiyadamath ithurui,
mama nam kiyanne tile gahapan Space nethuwa 2 X 2
Tile calculate karaganna meken
Code:
https://www.calculator.net/tile-calculator.html?tilewidth=24&tilewidthunit=inch&tilelength=24&tilelengthunit=inch&totalarea=1000&totalareaunit=foot&totalwidth=&totalwidthunit=foot&totallength=&totallengthunit=foot&gapsize=0.05&gapsizeunit=inch&x=96&y=10Oke uda polish eka yanawa wax polish karala thiya gaththe naththan. In passe duka thama ranjani
shine ekata medenne ne TIka kalayak yaddi Matte finish ekak enawa
Iri Thelenawa, Bas kiyanawanam iri thelenne ne kiyala mama nam danne ne eka
mokada mama as dekata dekala thiyenawa iri theluna ewa
1000sqft Kiyanne Tile 250 2X2
Cost eka 140,000
Bas kuli 50 per sqft 45th karanawa 50,000
Yakado Badama kapanna echchara loku cost ekak yanne ne
concrete karalanam a wiyadamath ithurui,
mama nam kiyanne tile gahapan Space nethuwa 2 X 2
Tile calculate karaganna meken
Code:https://www.calculator.net/tile-calculator.html?tilewidth=24&tilewidthunit=inch&tilelength=24&tilelengthunit=inch&totalarea=1000&totalareaunit=foot&totalwidth=&totalwidthunit=foot&totallength=&totallengthunit=foot&gapsize=0.05&gapsizeunit=inch&x=96&y=10
මටත් භය තියෙන්නෙ ඕකෙ durability එක ගැන තමා.. හැබැයි ගොඩක් ලොකු workshop එහෙම නම් තාම ඔය වැඩේ කරනවා.. මොකද ටයිල් වලට ලොකු වියදමක් යිනවනේ.. ගෙවල් වල නම් ඕක කරනව දැකලා නෑ මාත්.. තව ටිකක් හොයලා බලන එක හොදයි වගේ...
Last edited:
1. Stains & Discoloration: If stains, such as oil, rust, etc. are present before the concrete is polished, they may remain in the finished product. It is important to protect the slab from these stains before the concrete is polished. On the other hand, there are many factors that cannot be controlled during the pour of the concrete that may lead to discoloration.
2. Edges: The perimeter edges of a building are different from the field of the floor because they are hand troweled vs power troweled. Because of the difference in troweling the surface is less dense at the edges. When polished, this difference is evident in the color of the concrete. If perfection is what you are looking for, it is important you understand this before you run into this common polished concrete floor problem.
Not adhereing to the floor flatness is a problem with polished concrete.
A Wavy Floor is an Eyesore
3. Waves: Floor flatness is important if you want a uniform polished concrete floor. Most high quality specs call for a floor flatness of greater than 40. Floor flatness is measured within 48 hours of finishing the concrete. Though waves may be hard to detect by looking at the floor, once the floor is polished they will stand out distinctly. That is one of the many polished concrete floor problems: once polished, defects and imperfections are amplified. A wavy floor can look splotchy, have uneven aggregate exposure, and may not be what the customer wants.
4. Debris in Floor: During the pouring and finishing process things happen…the wind blows pineneedles into the slab, the finisher drops his sunflower seeds, etc. Leaving these items on the slab to be troweled in is okay if you are putting down carpet or tile, but when polishing a concrete floor these items will leave imprints or be exposed and have to be cut out and patched which leads to a slab with many tiny patches that do not match.
2. Edges: The perimeter edges of a building are different from the field of the floor because they are hand troweled vs power troweled. Because of the difference in troweling the surface is less dense at the edges. When polished, this difference is evident in the color of the concrete. If perfection is what you are looking for, it is important you understand this before you run into this common polished concrete floor problem.
Not adhereing to the floor flatness is a problem with polished concrete.
A Wavy Floor is an Eyesore
3. Waves: Floor flatness is important if you want a uniform polished concrete floor. Most high quality specs call for a floor flatness of greater than 40. Floor flatness is measured within 48 hours of finishing the concrete. Though waves may be hard to detect by looking at the floor, once the floor is polished they will stand out distinctly. That is one of the many polished concrete floor problems: once polished, defects and imperfections are amplified. A wavy floor can look splotchy, have uneven aggregate exposure, and may not be what the customer wants.
4. Debris in Floor: During the pouring and finishing process things happen…the wind blows pineneedles into the slab, the finisher drops his sunflower seeds, etc. Leaving these items on the slab to be troweled in is okay if you are putting down carpet or tile, but when polishing a concrete floor these items will leave imprints or be exposed and have to be cut out and patched which leads to a slab with many tiny patches that do not match.
Similar threads
