Guys I am hoping to buy a vga and psu this Wednesday from Red-line technologies.
I just want to know what you guys think and if there is a better choice elsewhere.
Here is what I am going to buy........
Axle GTX 460 ACE edition
http://www.axle3d.com/eng/productspec.php?id=273
This sample
Core Clock: 742MHz
Shader Clock:1484MHz
Memory Clock:3600MHz
Its cooled with two arctic fans. It will cost me 25.5k rs and the only reason I'm not going for EVGA GTX 460 is that this thing is overclocked even more and has good cooling. Am I doing a blunder?
http://www.guru3d.com/article/axle-geforce-gtx-460-ace-review/
"Though the Axle graphics cards are still hard to find in the shops, we do like to say that we definitely recommend them. So if you spot one and are in the market for a card like this then do not hesitate to purchase it on the grounds of it being an unknown brand."-3d guru
Axle Twister 500w PSU.
INPUT
VOLTAGE
Min. Normal Max. Unit
90 110 130 Vac
180 220 260 Vac
OUTPUT POWER
500W (MAX).
VOLTAGE
+5V +12V1 +12V2 -5V -12V +3.3V +5Vsb
MAX LOAD 40A 16A 16A 0.5A 0.5A 28A 3A
MIN LOAD 1.5A 0.3A 0.3A 0A 0A 0A 0A
Regulation ± 5% ± 5% ± 5% ± 10% ± 10% ± 5% ± 5%
Ripple 50mV 120mV 120mV 150mV 300mV 50mV 50mV
Noise 100mV 240mV 240mV 300mV 360mV 100mV 100mV
http://www.axle3d.com/eng/productspec.php?id=12
Guys say this is better than the EVGA in terms of temp and performance as well. What do you guys think?
Okkotama 2yrs warranty denawalu..........
I just want to know what you guys think and if there is a better choice elsewhere.
Here is what I am going to buy........
Axle GTX 460 ACE edition
http://www.axle3d.com/eng/productspec.php?id=273
This sample
Core Clock: 742MHz
Shader Clock:1484MHz
Memory Clock:3600MHz
Its cooled with two arctic fans. It will cost me 25.5k rs and the only reason I'm not going for EVGA GTX 460 is that this thing is overclocked even more and has good cooling. Am I doing a blunder?
http://www.guru3d.com/article/axle-geforce-gtx-460-ace-review/
"Though the Axle graphics cards are still hard to find in the shops, we do like to say that we definitely recommend them. So if you spot one and are in the market for a card like this then do not hesitate to purchase it on the grounds of it being an unknown brand."-3d guru
Axle Twister 500w PSU.
INPUT
VOLTAGE
Min. Normal Max. Unit
90 110 130 Vac
180 220 260 Vac
OUTPUT POWER
500W (MAX).
VOLTAGE
+5V +12V1 +12V2 -5V -12V +3.3V +5Vsb
MAX LOAD 40A 16A 16A 0.5A 0.5A 28A 3A
MIN LOAD 1.5A 0.3A 0.3A 0A 0A 0A 0A
Regulation ± 5% ± 5% ± 5% ± 10% ± 10% ± 5% ± 5%
Ripple 50mV 120mV 120mV 150mV 300mV 50mV 50mV
Noise 100mV 240mV 240mV 300mV 360mV 100mV 100mV
http://www.axle3d.com/eng/productspec.php?id=12
Guys say this is better than the EVGA in terms of temp and performance as well. What do you guys think?
Okkotama 2yrs warranty denawalu..........
Last edited:
