මචන් මට දැන ගන්න ඕනෙ network එකක තියෙන PCs ටිකක bandwidth usage එක කොහොමද monitor කරන්නේ කියලා.
ඒ ඔක්කොම PCs වල IPs assign කරලා තියෙන්නේ. DHCP නෙවෙයි.
ඒ ඔක්කොම PCs වල IPs assign කරලා තියෙන්නේ. DHCP නෙවෙයි.
Latest ads
-
Colombo RidhMathraa ’26 🎶✨- Tmadhusanka
- Updated:
-
Colombo PXN V10 Pro Direct Drive Racing Wheel (Under Warranty)
- Abdur Rahman
- Updated:
-
USDT ණය සේවාව - USDT Loan Service
- පුරවැසියා
- Updated:
-
🎮 INDIAN PSN GIFT CARDS AVAILABLE NOW! 🎮
- madukaperera
- Updated:
-
🚀 Google AI PRO – 18 Months | Rs. 850 Only- lkkolla
- Updated:
Monitor Network Usage
- Thread starter dushan90
- Start date
මෙහෙමයි මචං. එක internet connection 1ක් PCs 7ක විතර share වෙනවා. ඉතින් මට දැනගන්න ඕනේ ඒ PCs කොච්චර internet use කරනවද කියලයි.
තේරුනාද මන්ද මං කියපු එක!!!!!
තේරුනාද මන්ද මං කියපු එක!!!!!
මෙහෙමයි මචං. එක internet connection 1ක් PCs 7ක විතර share වෙනවා. ඉතින් මට දැනගන්න ඕනේ ඒ PCs කොච්චර internet use කරනවද කියලයි.
තේරුනාද මන්ද මං කියපු එක!!!!!
PC 7 switch ekata connect wenawa.. switch eka connect wenawa router ekata harine
mekai machan nikan switch eken and ADSL router eken hariyata owa measure karanna baha... ubata oni nam nikan switch eka wenuwata manageable switch 1k dala , between router and switch bandwith measure karanna puluwan
nettam podi PC ekak danawa switch and router mddata with 2 NICS and eka through route wena bandwidth gannawa wire shark wage rool ekakin...
individual PC walatadana software walin maninna baha moko LAN communication walatat bandwith use wena nisa. ewa internet bandwidth nemeine
gedara PC 2k thiyenawa. 2tama mama daala thiyenne "NetWorx". podi sw 1k. pattai.
podi awulakata thiyenne LAN usage ekath add wenawa.
ubata puluwan internet yana connection 1 witharak select karala monitor karanna. ethakota wede hari.
podi awulakata thiyenne LAN usage ekath add wenawa.
ubata puluwan internet yana connection 1 witharak select karala monitor karanna. ethakota wede hari.
eka tamai mama kiwwe LAN ewat use wenawa... individual balanna baha lesiyen... ekko load balancer ekak danna oni nattam managable switch ekakin router ekata router wena packet data ganna oni... nattam switch adsl assata danna oni tawa PC ekak route wena ewa balanna
PC 7 switch ekata connect wenawa.. switch eka connect wenawa router ekata harine
mekai machan nikan switch eken and ADSL router eken hariyata owa measure karanna baha... ubata oni nam nikan switch eka wenuwata manageable switch 1k dala , between router and switch bandwith measure karanna puluwan
nettam podi PC ekak danawa switch and router mddata with 2 NICS and eka through route wena bandwidth gannawa wire shark wage rool ekakin...
individual PC walatadana software walin maninna baha moko LAN communication walatat bandwith use wena nisa. ewa internet bandwidth nemeine
Ape thiyenne machan Dialog 4G connection 1k.
PCs tika switch ekata connect wenawa. eka 4G connection 1ta connect wenawa.
Ape wadi hariya karanne internet browsing. Ithin ehema baluwoth network communication usage eka echchara loku gaanak wenne na neda?
You can use a managed switch to capture the traffic you just have to put it in the correct location. You would want this to replace the switch that is just before your router. You would then capture traffic on the line going to the router.
This is the simplest method but the output from wireshark sometimes too detailed so you end up processing huge amounts of data. I would still recommend you go this route and spend the time to learn wireshark well.
Another method commonly used is to place a linux based machine between the top switch and the router. You could then see the traffic like wireshark or you could use something like a transparent squid proxy. This tends to be the next step most people have to take after they capture data. You will find out who is doing stuff but you have no way to stop them. You end up putting in a device like this to act as a form of firewall to filter traffic.
A last option that is used for longer term reporting is to run netflow. This again can be captured by a inline machine or you can run it on some routers, ones that run dd-wrt can generate a form of netflow. This is a simplified version of the capture data you can get with a sniffer.
Still when it comes down to is your problem is a people problem and not technical. If these are employees maybe a reminder that if you catch them doing stuff that is not allowed they are out the door.
This is the simplest method but the output from wireshark sometimes too detailed so you end up processing huge amounts of data. I would still recommend you go this route and spend the time to learn wireshark well.
Another method commonly used is to place a linux based machine between the top switch and the router. You could then see the traffic like wireshark or you could use something like a transparent squid proxy. This tends to be the next step most people have to take after they capture data. You will find out who is doing stuff but you have no way to stop them. You end up putting in a device like this to act as a form of firewall to filter traffic.
A last option that is used for longer term reporting is to run netflow. This again can be captured by a inline machine or you can run it on some routers, ones that run dd-wrt can generate a form of netflow. This is a simplified version of the capture data you can get with a sniffer.
Still when it comes down to is your problem is a people problem and not technical. If these are employees maybe a reminder that if you catch them doing stuff that is not allowed they are out the door.
Code:
http://www.tomshardware.com/forum/44535-42-need-monitor-internet-usageThanks for the reply machan. But I'm looking for a more simpler method like an app, rather than doing physical changes.
printer ekakwath file 1k wath share karala nadda within computers ?
ehenam godak adui... circuit switching nisa packets ohe flood wenne naha eth overheads tiyenna puluwan...
