To setup security on the wireless router Thomson TG585 v8 please follow the below steps:
1.Open your web browser.
2 Browse to
http://dsldevice.lan or to the IP address of your Thomson Gateway (by default: 192.168.1.254).
3 If you have protected your Thomson Gateway with a user name and password, the Thomson Gateway
will prompt you to enter these. Enter your user name and password and click OK.
4 The Thomson Gateway GUI appears.
5 On the left menu, click Home Network.Under Wireless, click your access point.
Your access point is listed in the following format: "WLAN: ()". For
example, WLAN: Thomson83C7C7 (54Mbps).
6 The Wireless Access Point page appears.In the Navigation bar, click Configure.
7 Under Security, Select Use WPA-PSK Encryption.In the WPA-PSK Encryption Key box, type a the key of your choice. The key must be in one of the following formats:
a. 8 to 63 alphanumeric characters. For example: MyKey123 OR
b. 8 to 64 hexadecimal characters (characters from 0 to 9 and from A to F). For example: C54F48A5.
Click Apply.
8 Configure your wireless client(s) with the same settings.
Please revert back for any more issues that you may face.
By default the username is Administrator, and the password is blank
