ERICSSON WIFI Access Point Help !!

[eyes89]

okata default ip natuwa athi.

DHCP dila balanna. IP 1k lease unoth hari.

mata eka click une naha. heta ehema karala update ekak dennam

 

[vito]

try plugging this to a computer with an ethernet cable and run a packet capture (e.g., wireshark)
you should be able to see the arp requests being made the access point and see the ip address of the access point
like this:

 

[LZP1992]

mata eka click une naha. heta ehema karala update ekak dennam

Aniwa dapan

 

[imhotep]

ow me thama device eka....
mekata log wenna default IP address eka oni..
eka thama hoya ganna natte

---

Try kala bro....
wrong IP address
------ Post added on Jun 25, 2023 at 5:49 PM

Found this on a forum. It's for a BelAir AP (which is most likely the same as Ericsson because Ericsson bought out BelAir more than a decade ago)

After a factory reset the AP defaults to the IP address 10.1.1.10 and it’s ONLY accessible via ethernet wired connection.
The username and password are root / admin123

So you need to reconfigure your PC to a static IP of 10.1.1.11 with subnet mask 255.255.255.0 and leave all other fields blank. Connect your PC with an ethernet cable to any of the 4 LAN ports on back of the router. (not the WAN port)

Note: If you still can't access after doing all these steps, you probably didn’t do a successful reset on the device. Do another reset.

PS: Try it out. It's the summary of the write up on that forum FYI.

 

[NRTG]

BUMPI

 

[LZP1992]

Found this on a forum. It's for a BelAir AP (which is most likely the same as Ericsson because Ericsson bought out BelAir more than a decade ago)

After a factory reset the AP defaults to the IP address 10.1.1.10 and it’s ONLY accessible via ethernet wired connection.
The username and password are root / admin123

So you need to reconfigure your PC to a static IP of 10.1.1.11 with subnet mask 255.255.255.0 and leave all other fields blank. Connect your PC with an ethernet cable to any of the 4 LAN ports on back of the router. (not the WAN port)

Note: If you still can't access after doing all these steps, you probably didn’t do a successful reset on the device. Do another reset.

PS: Try it out. It's the summary of the write up on that forum FYI.

Bravo man
It is kind of surprising that the default info of the AP are not in the manual or the back side of the AP.
Hope it will work.

 

[imhotep]

Barvo man
It is kind of surprising that the default info of the AP are not in the manual or the back side of the AP.
Hope it will work.

Unless Ericsson changed the firmware the logins should work. He got to try and let us know.

 

[TonyMontana83]

Oka switch ekakata gahala router ekakuth gahanna one. Okata IP ekak na. DHCP denna one.

 

[LZP1992]

Oka switch ekakata gahala router ekakuth gahanna one. Okata IP ekak na. DHCP denna one.

---

Unless Ericsson changed the firmware the logins should work. He got to try and let us know.

Exactly machan.
haven't config these kind of AP before And thats why I'm waiting for his reply.
------ Post added on Jun 26, 2023 at 6:35 AM

 

[eyes89]

mata eka click une naha. heta ehema karala update ekak dennam

DHCP pool ekak thiyena device ekakata connect karanna oni. IP ekak release wenawa.
Help karapu okkotama thanks.
Default IP: DHCP IP
Username/Password: root/admin123

---

---

Exactly machan.
haven't config these kind of AP before And thats why I'm waiting for his reply.
------ Post added on Jun 26, 2023 at 6:35 AM

Here a DHCP pool releases IP value is used as the default IP.
Default Username & Password is root and admin123

Thank u so much for your contribution.......
------ Post added on Jun 26, 2023 at 4:59 PM

 

[imhotep]

DHCP pool ekak thiyena device ekakata connect karanna oni. IP ekak release wenawa.
Help karapu okkotama thanks.
Default IP: DHCP IP
Username/Password: root/admin123

---

Here a DHCP pool releases IP value is used as the default IP.
Default Username & Password is root and admin123

Thank u so much for your contribution.......
------ Post added on Jun 26, 2023 at 4:59 PM

Did you access this on the wireless network?

 

[LZP1992]

DHCP pool ekak thiyena device ekakata connect karanna oni. IP ekak release wenawa.
Help karapu okkotama thanks.
Default IP: DHCP IP
Username/Password: root/admin123

---

Here a DHCP pool releases IP value is used as the default IP.
Default Username & Password is root and admin123

Thank u so much for your contribution.......
------ Post added on Jun 26, 2023 at 4:59 PM

Ela machan
one of my friends also said some hp AP models must be configured like this.